denali.pro.user

Clone Tools
  • last updated a few seconds ago
Constraints
Constraints: committers
 
Constraints: files
Constraints: dates
DEN-13939: IMP: Implementation of the the message [0xBA00]

Messaging:

- Modified the message 0xBB00 required length from 3xU32 to 2xU32

- Renamed the VConfrimDialog to VConfirm, since the view class is not the actual dialog implementation.

- Merged the vPowerOff view to the VConfrim, and removed the VPowerOff view classes.

Alarm Integration:

- AlarmItem: add the hasAlarm to theAlarmMinimize as well to prevent the AlarmBar being visible when there is no active alarm.

- VAlarmStatus: fixed the issue with the hasAlarm property which was causing the AlarmDialog being visible while there was not active alarm.

Confirm Dialog:

- Used the PowerItem.qml and the PowerOff Dialog for Generic Confirm, and improved the code to be repurposed.

- Footer: updated the Footer component to be able to re-layout the touchrects without an open/close cycle.

- TouchRect: exposed the the buttons text.

  1. … 19 more files in changeset.
DEN-13939: IMP: Implementation of the the message [0xBA00]

- The Model/View are implemented and exposed to QML.

  1. … 15 more files in changeset.
DEN-13844: DEN-13774: VITALS numpad appears during rinseback if BP interval is on

- It was only working on the HDOpMode to be in-treatment, but needed to get the HDTreatmentState as well to make sure it is in Dialysis state too.

  1. … 7 more files in changeset.
DEN-13743: IMP: Mostly worked on Alarm Dialog/Bar

- Changed the Alarm Dialog (Title decreased by 4, Description increased by 4) / Bar (increased by 6) font size,

- Adjusted the AlarmDialog Timer position and layout.

- Removed the mouseArea from the WaitDone component.

- Added titel/description fontPixedSize for the NotificationDialog and NotificationBar

- Clear the reasontext on home screen when is not visible anymore.

- Clear the reasontext on SettingsDG when is not visible anymore.

- Used NotificationBarSmall instead of NotificationBar in:

- ModalDialog

- MainHome

- TreatmentAdjustmentBase

- TreatmentFlowBase

  1. … 15 more files in changeset.
Updated Alarm mapping

  1. … 2 more files in changeset.
DEN-13743: IMP: Device Registration - CloudSync POST test - Device Serial/Version req/rsp

- Added the disable functionality ( main.h SINGLETON_... macros ) for the Singleton classes, which are basically controllers, to stop their thread event loop, so they literally stop working.

- Connected the disable functionality of the controllers like, CloudSync, Bluetooth (Maybe later Logger), to the POST result.

- Improved the ./run.sh script and same on the ApplicationPOST class.

- Set the minimum of the HD/DG serial length to 1 byte, since it is not exactly at 15 or 20 char length.

- Removed the "CS" from the UI log of sending out the messages to CS, which the source is UI, not the CS and this is confusing.

- Removed the "Settings/DG Cleaning" scheduling section.

- Changed the POST version/serial request from UI to all to be identified in the log from "Versionreq" to "POSTInfReq".

- Added a new UI POST Alarm in AlarmDefs.h, ALARM_ID_UI_POST_FAILURE_CLOUDSYNC = 295, ///< UI POST CloudSync failure

- Fixed a potential bug on SD-Card not ready service logging.

  1. … 16 more files in changeset.
Latest Unit testing modules

  1. … 4 more files in changeset.
DEN-13645: IMP: Updated the Blood Prime message [0x5900]

- It has 3 parameters (UI expected) but recently changed on the FW and sending only 2 which then UI rejects it. now updated to have only 3.

  1. … 5 more files in changeset.
DEN-13645: IMP: Unhandled messages duplicate keys fix

- it has been observed that the unhandled messages are not logged correctly and turned out it is because of the Types of each parameter used as keys and keys can't be duplicate by default which caused issue for the unhandled messages, since they may have 6 parameter and all with F32 type which then becomes one parameter of type F32.

- an attribute has been defined for the config file with the format:

#--duplicate_key_on

#--duplicate_key_off

to allow or disallow the duplicate key at any point in the config file.

- Note that the save config parameters are always unique key like AlarmVolume which doesn't make sense to have duplicate entry.

  1. … 9 more files in changeset.
DEN-13645: IMP: DEN-9297: Disinfection messaging flow review

- Disinfection current code/design review

- Disinfection Screens and Navigation implementation

- There are functions and properties used but not implemented yet in vDisinfectAdjustDisinfect, and some that are implemented are not implemented with the new design.

  1. … 7 more files in changeset.
DEN-13645: IMP: General Implementation [-k, -K]

- The logic for the check-in and Ack messages reversed to be always disabled and can be enabled later if needed.

- For Integration/Unit tests the application needs to be called with these two switches otherwise tests will fail.

  1. … 5 more files in changeset.
DEN-13645: IMP: DEN-13473: HD Communication/UI Issues

***** THIS IS AN EXPERIMENT *****

- It seems like the UI could be initialized early on, even before the controllers, so when the controllers are sending messages to UI to update the screen it is initialized and available to get update.

- previously when controllers were publishing the statuses UI was not even initialized and ready to receive any signal and that seems to be the reason some part of the UI (SD-Card status) was not get updated and missed signals.

_____

- Also added NoCANBus to able to go to Service when there is no HD to confirm the state change.

  1. … 3 more files in changeset.
DEN-13645: IMP: General Implementation

DEN-12836: Treatment Report/log export modifications

  1. … 11 more files in changeset.
DEN-13645: IMP: General Implementation

DEN-13447: UI able to send its final POST result to HD by request

  1. … 11 more files in changeset.
DEN-13489 IMP: General Implementation

DEN-13035: Update alarm body messages

- Removed the exclamation mark icon form the Alarm Dialog.

- Removed the exclamation mark icon form the Alarm Bar.

- Made the whole AlarmDialog title bar doubleClick and diagnostics opener if the alarm is not minimizable.

- Moved the Alarm ID from title to the bottom left of the dialog with format: "ID:<id>".

- Clipped the AlarmDialon body message area, crop the text if longer than dialog area.

- Changed the "settings" property name of the VSettings to "instructions".

- Changed the date/time formats keys to simplify the code and conf file.

- Implemented the Alarm Body messages, to load from Alams/Alarms.conf, instead of the FW.

- The FW texts/documents will still being used if the Alarms.conf doesn't have a definition.

- A instruction base capability has also been added to the MVC, but UI still not supporting it.

  1. … 18 more files in changeset.
DEN-13489: IMP: General Implementation for any bugs and any other implementations

- Enable Dialin logging CL switch has changed to disable dialin logging, to make the dialin logging as enabled by default and removed -d from run.sh. [Sean's Request]

- Added log unhandled as error to the unhandled reader as well.

- Implemented the NoCANBus to be used when no CANBus enabled. For now it is only bypassing the create treatment button command and helps to get to the treatment parameters for the touchscreen test. [EEMN's Support]

- Fixed a bug on the Volume Adjustment on post, sending to HD to update HD alarm volume with previous, adjusted value, which was sending a request one again receiving HD response, and it was a potential crash loop.

- Added disable acknowledgment logs (req,bak) CL switch, -K : --disable-acknow-log [Sean's Request]

  1. … 14 more files in changeset.
DEN-13489 IMP: General Implementation

DEN-12838: UI shall store the latest alarm volume and resend that to HD on POST

DEN-11539: Service password initial setup

  1. … 12 more files in changeset.
DEN-12838: UI shall store the latest alarm volume and resend that to HD on POST

- The save ability has been added to the Settings.

- Note: the design of the settings need to change: 1- singleton class should be the controller not the mode, 2 - The column based keyvalue has to change to tree(map).

  1. … 12 more files in changeset.
tst_model updates

  1. … 3 more files in changeset.
DEN-13199: INT: DVT Support

- During DVT support found out the BCuff vitals debug item on the top of the screen is not working, and fixed ti by adding a real time version of the same actual vital properties which gets updated every time the vitals received.

  1. … 5 more files in changeset.
DEN-13129: SCA: Code Analysis

- Generated Static Code Analisys

  1. … 2 more files in changeset.
UI-DEN-12716 : UI-DEN-12716-2 : UI-DEN-12716_UI BN S70

- Addressed the code review comments.

- The timedatectl command was missing the set-timezone command option.

- When using timedatectl no need to use the hwclock

- During the unit test review noticed that the thread name changed and updated and kept it, although we still have some issues there which needs to be fixed.

  1. … 4 more files in changeset.
DEN-13127: LTS: Development Support

- [Export Button Enabling in VM #61|https://github.com/Diality/testsuites/issues/61]

  1. … 8 more files in changeset.
DEN-13134: IMP: General Implementation for any bugs and any other implementations

DEN-12836: Treatment Report/log export modifications

- Improved the SDItem and renamed to SDCProgressItem.

- Added another separate progress circle component for the USB Driver [USBProgressItem]

- Adding Space check for USB as well to get the USBProgressCircle update.

- Optimized ExportButton and added two size for Settings screen(normal) and Treatment Review screen(small)

- Improved USB button comonent

- Added a global byte size converter in Variable.qml

- Improved MainMenu component

- Added a notification for the TreatmentFlowBase.qml main component.

- Used the notification of the TreatmentFlowBase.qml for the Treatment Review Screen Log export to display feedback to the user.

- Added an individual screen for the log export.

- Removed the Export Log and USB eject from the main settings option screen.

- Added an option for the Export log on the settings home screen which is currently enabled for non-service users too.

- Fixed the DGVersionResponse, log message.

- Put a comment in the FileHandler.cpp about the Qt API QStorageInfo::mountedVolume() which seems so slow on detecting mounted volumes when a USB derive is just plugged in (It could be system issue, since it has also been observed from shell console.)

- Added error handling to the Treatment Log/Report export

DEN-12726: Denali application crashing

- Modified the Logger Maxusage limit to keep 50% of the data/event log and 15% of the service log and keep 35% free, after the log clean up triggered by 15% free storage detected.

DEN-13051: Encounter alarm 6 and SD card detection problem after updating UI version

DEN-13156: Settings screen menu should disappear on service mode

- Improved the MainStack.qml navigation rules.

- Improved the Patient ID keyboard handling, to hide the keyboard, when not on the screen.

- Improved the SettingsStack.qml navigation rules.

DEN-13128: KBM: Cloud Sync Integration

- Saving the CS log in UTC timezone.

DEN-13127: LTS: Development Support

- Fixed the issue found on the End-Treatment screen Confirm button which didn't respect the last instruction page enable only rule.

  1. … 44 more files in changeset.
DEN-13126: INT: Support/Meetings/Planning/Development

- Fixed the application update scripts to setup a device within a Windows machine for releases.

  1. … 4 more files in changeset.
DEN-12836: Treatment Report/log export modifications

- DEN-12944: KBM: Usual Meetings/Support/Development

- Modified the setup.sh script to work on PDT (Pacific timezone)

- Added timezone display on the screen by adding it to the VDateTime

- Removed unnecessary FileHandler header include.

- Modified the Treatment Review Export button to export the current TxReport only.

- Added the Safe Eject button for the Post-Treatment TxReport Export.

- Moved Log Folder definitions to the StorageGlobal.

- Fixed the greeting issue [https://github.com/Diality/testsuites/issues/57]

- DEN-11826: Bluetooth BloodPressure Cuff Interval - Observation

- It has completely redesigned

- DEN-9706: Blood Pressure measurement entry window closes automatically

- Auto Hide is disabled

  1. … 26 more files in changeset.
DEN-12944: KBM: Integration with successful registration.

- removed the else which was incorrect, which was causing a problem.

  1. … 1 more file in changeset.
DEN-12558: HD does not transition to service mode

- implemented the service mode confirmation

- decreased the dialog animation duration

- renamed the service dates MVC to differentiate with service mode.

  1. … 32 more files in changeset.
DEN-12541: Get the SD-Card size from the system

  1. … 4 more files in changeset.
DEN-12944: KBM: Usual Meetings/Support/Development

- KBM request to send a response message (1003) when the registration on UI side is done and credentials are copied to the safe folder.

- I also modified the code to start deleting the source credential files if only all the files are copied. previously it was one copy, one delete.

  1. … 4 more files in changeset.