main.qml

Clone Tools
  • last updated a few seconds ago
Constraints
Constraints: committers
 
Constraints: files
Constraints: dates
DEN-13645: IMP: DEN-13473: HD Communication/UI Issues

***** THIS IS AN EXPERIMENT *****

- It seems like the UI could be initialized early on, even before the controllers, so when the controllers are sending messages to UI to update the screen it is initialized and available to get update.

- previously when controllers were publishing the statuses UI was not even initialized and ready to receive any signal and that seems to be the reason some part of the UI (SD-Card status) was not get updated and missed signals.

_____

- Also added NoCANBus to able to go to Service when there is no HD to confirm the state change.

  1. … 3 more files in changeset.
DEN-13489 IMP: General Implementation

DEN-13035: Update alarm body messages

- Removed the exclamation mark icon form the Alarm Dialog.

- Removed the exclamation mark icon form the Alarm Bar.

- Made the whole AlarmDialog title bar doubleClick and diagnostics opener if the alarm is not minimizable.

- Moved the Alarm ID from title to the bottom left of the dialog with format: "ID:<id>".

- Clipped the AlarmDialon body message area, crop the text if longer than dialog area.

- Changed the "settings" property name of the VSettings to "instructions".

- Changed the date/time formats keys to simplify the code and conf file.

- Implemented the Alarm Body messages, to load from Alams/Alarms.conf, instead of the FW.

- The FW texts/documents will still being used if the Alarms.conf doesn't have a definition.

- A instruction base capability has also been added to the MVC, but UI still not supporting it.

  1. … 18 more files in changeset.
DEN-13489 IMP: General Implementation

DEN-12838: UI shall store the latest alarm volume and resend that to HD on POST

DEN-11539: Service password initial setup

  1. … 12 more files in changeset.
DEN-12838: UI shall store the latest alarm volume and resend that to HD on POST

- The save ability has been added to the Settings.

- Note: the design of the settings need to change: 1- singleton class should be the controller not the mode, 2 - The column based keyvalue has to change to tree(map).

  1. … 12 more files in changeset.
DEN-13199: INT: DVT Support

- During DVT support found out the BCuff vitals debug item on the top of the screen is not working, and fixed ti by adding a real time version of the same actual vital properties which gets updated every time the vitals received.

  1. … 5 more files in changeset.
RESOLVED.

RESOLVED.

Sure Sean, if that is the decision, will do it soon and create a case for that. I also believe some other CL Switches need to be removed, which were only implemented for our testing at the time (CA...

Sure Sean, if that is the decision, will do it soon and create a case for that.
I also believe some other CL Switches need to be removed, which were only implemented for our testing at the time (CANBus).

Issue DEN-13441 - MR: Make the Dialin log permanent with no switch [CL switches review/removal] has been successfully created

If this is to log Dialin messages, we should always do that (no switch). If a Dialin command is given/responded to, we definitely want to know about that - so want to see it in the log. Dialin comm...

If this is to log Dialin messages, we should always do that (no switch). If a Dialin command is given/responded to, we definitely want to know about that - so want to see it in the log. Dialin commands are always one-shot type messages, so will not impact log size.

RESOLVED.

RESOLVED.

RESOLVED.

RESOLVED.

RESOLVED

RESOLVED

This code is going to be used later in the Log Export for slow transfer & confirmation for the USB port slow transfer issue. I kept it in the application repo to keep it safe. Commented out to not ...

This code is going to be used later in the Log Export for slow transfer & confirmation for the USB port slow transfer issue.
I kept it in the application repo to keep it safe.
Commented out to not affect the coverage.

http://dvm-linux02:8060/cru/#UI-DEN-12716-2CFR-30978 in PostTreatmentReview.qml@40

http://dvm-linux02:8060/cru/#UI-DEN-12716-2CFR-30978
in PostTreatmentReview.qml@40

Where would this value change?

Where would this value change?

At the moment I added that switch I assumed it should only be used for V&V and SysV testing.

At the moment I added that switch I assumed it should only be used for V&V and SysV testing.

This is the requirement. PRS 417: The HD Device manufacturing default timezone shall be (UTC-08:00) Pacific Time.

This is the requirement.
PRS 417: The HD Device manufacturing default timezone shall be (UTC-08:00) Pacific Time.

Why is main.cpp all commented out?

Why is main.cpp all commented out?

All systems will be setup for Pacific time zone?

All systems will be setup for Pacific time zone?

Why must this be removed later?

Why must this be removed later?

UI-DEN-12716_UI BN S70
UI-DEN-12716_UI BN S70
DEN-13134: IMP: General Implementation for any bugs and any other implementations

DEN-12836: Treatment Report/log export modifications

- Improved the SDItem and renamed to SDCProgressItem.

- Added another separate progress circle component for the USB Driver [USBProgressItem]

- Adding Space check for USB as well to get the USBProgressCircle update.

- Optimized ExportButton and added two size for Settings screen(normal) and Treatment Review screen(small)

- Improved USB button comonent

- Added a global byte size converter in Variable.qml

- Improved MainMenu component

- Added a notification for the TreatmentFlowBase.qml main component.

- Used the notification of the TreatmentFlowBase.qml for the Treatment Review Screen Log export to display feedback to the user.

- Added an individual screen for the log export.

- Removed the Export Log and USB eject from the main settings option screen.

- Added an option for the Export log on the settings home screen which is currently enabled for non-service users too.

- Fixed the DGVersionResponse, log message.

- Put a comment in the FileHandler.cpp about the Qt API QStorageInfo::mountedVolume() which seems so slow on detecting mounted volumes when a USB derive is just plugged in (It could be system issue, since it has also been observed from shell console.)

- Added error handling to the Treatment Log/Report export

DEN-12726: Denali application crashing

- Modified the Logger Maxusage limit to keep 50% of the data/event log and 15% of the service log and keep 35% free, after the log clean up triggered by 15% free storage detected.

DEN-13051: Encounter alarm 6 and SD card detection problem after updating UI version

DEN-13156: Settings screen menu should disappear on service mode

- Improved the MainStack.qml navigation rules.

- Improved the Patient ID keyboard handling, to hide the keyboard, when not on the screen.

- Improved the SettingsStack.qml navigation rules.

DEN-13128: KBM: Cloud Sync Integration

- Saving the CS log in UTC timezone.

DEN-13127: LTS: Development Support

- Fixed the issue found on the End-Treatment screen Confirm button which didn't respect the last instruction page enable only rule.

  1. … 44 more files in changeset.
DEN-12836: Treatment Report/log export modifications

- DEN-12944: KBM: Usual Meetings/Support/Development

- Modified the setup.sh script to work on PDT (Pacific timezone)

- Added timezone display on the screen by adding it to the VDateTime

- Removed unnecessary FileHandler header include.

- Modified the Treatment Review Export button to export the current TxReport only.

- Added the Safe Eject button for the Post-Treatment TxReport Export.

- Moved Log Folder definitions to the StorageGlobal.

- Fixed the greeting issue [https://github.com/Diality/testsuites/issues/57]

- DEN-11826: Bluetooth BloodPressure Cuff Interval - Observation

- It has completely redesigned

- DEN-9706: Blood Pressure measurement entry window closes automatically

- Auto Hide is disabled

  1. … 26 more files in changeset.
DEN-12558: HD does not transition to service mode

- implemented the service mode confirmation

- decreased the dialog animation duration

- renamed the service dates MVC to differentiate with service mode.

  1. … 32 more files in changeset.
Bamboo Commit: Updated the Copyright section and replaced tabs with 4 spaces

  1. … 159 more files in changeset.
RESOLVED.

RESOLVED.