MainStack.qml

Clone Tools
  • last updated a few minutes ago
Constraints
Constraints: committers
 
Constraints: files
Constraints: dates
DEN-16637, DEN-16640, DEN-16641 : P1_Staging Dry-Run found issues.

DEN-16637: SW: Top Alarm on Debug Screen Does Not Change When Alarm is Cleared

DEN-16640: SW: Blood Measurement Interval Set to OFF During Treatment When Set to 5 min in Pre-treatment

DEN-16641: UI: Heparin Syringe Installation Screen Missing

  1. … 4 more files in changeset.
Bamboo Commit: Updated the Copyright section and replaced tabs with 4 spaces

  1. … 612 more files in changeset.
DENBUG-207: UI: UI does not reset to default parameters upon new patient

DEN-12728: UI: UI does not clean up Treatment Parameter settings for different patient

- the reset is added to the treatment parameters

- the foundation of the pre-population has been added but still there is parts need to be added to store the sliders' On/Off switch to be restored which is needed for the slider to set properly.

  1. … 4 more files in changeset.
DEN-12728: UI: UI does not clean up Treatment Parameter settings for different patient

- the reset is added to the treatment parameters

- the foundation of the pre-population has been added but still there is parts need to be added to store the sliders' On/Off switch to be restored which is needed for the slider to set properly.

  1. … 4 more files in changeset.
Bamboo Commit: Updated the Copyright section and replaced tabs with 4 spaces

  1. … 15 more files in changeset.
DEN-15812: UI: Add an option on the Configurations setup screen to prevent the Device Registration cleanup

- Added the UI portion of the update

- Added the -U cmd-line option to get UI Application in update mode.

  1. … 12 more files in changeset.
Bamboo Commit: Updated the Copyright section and replaced tabs with 4 spaces

  1. … 73 more files in changeset.
Merge branch 'DEN-15279-UI-BN-S97-Cybersecurity' into staging

  1. … 115 more files in changeset.
DEN-15296 : Implemented the screen base and navigation of the denali -E

  1. … 23 more files in changeset.
DEN-14955 Quick Start : MainTreatment - Cleaned up RangeRect, etc to not have rounding property per design update - Update treatment duration screen per Behrouz's request to center slider arrows on confirm button - Updated ultraFiltration screens to have slider arrows

  1. … 18 more files in changeset.
DEN-14955 : Quick Start - Main treatment Screens - Update screens to appropriately use or not use rounded sliders

  1. … 18 more files in changeset.
Bamboo Commit: Updated the Copyright section and replaced tabs with 4 spaces

  1. … 11 more files in changeset.
Merge branch 'DEN-14909-UI-VD-S92-QS-Sliders' into staging

  1. … 6 more files in changeset.
Bamboo Commit: Updated the Copyright section and replaced tabs with 4 spaces

  1. … 15 more files in changeset.
DEN-14858 : UI should navigate to Standby screen on Fault state

  1. … 3 more files in changeset.
Bamboo Commit: Updated the Copyright section and replaced tabs with 4 spaces

  1. … 50 more files in changeset.
Merge branch 'DEN-14733-UI-BN-S90-2' into staging

  1. … 43 more files in changeset.
DEN-14736 : IMP: Dry-Demo Support

- added the CLI switch -D : --enable-dry-demo

- added the CLI switch -A : --active-can-bus <CANBus>

- added the CLI switch -F : --disable-fault-screen

- will send confirmation response with ConfirmationID of 99 and as accepted(1):

- e.g. 03:32:29.560,bb00,UI,Confirm,99,1

  1. … 11 more files in changeset.
Bamboo Commit: Updated the Copyright section and replaced tabs with 4 spaces

  1. … 608 more files in changeset.
DEN-14391 , DEN-14393 : Qt 5.15.10 [QML run-time issues]

- Fixed all the QML warning and errors

- Enabled the Clang-Tidy, Clazy and cppcheck and fixed some.

- Removed unused images

- made the Denali POST logo transparent.

  1. … 56 more files in changeset.
DEN-13939: IMP: Fixed the merge issue

- Not sure why git didn't get the changes on the ModalDialog's Norification changes to NotificationSmall, and caused the issue on the property IconVisible.

  1. … 8 more files in changeset.
Bamboo Commit: Updated the Copyright section and replaced tabs with 4 spaces

  1. … 95 more files in changeset.
Merge branch 'DEN-13198-UI_BN_75' into staging

  1. … 45 more files in changeset.
Bamboo Commit: Updated the Copyright section and replaced tabs with 4 spaces

  1. … 100 more files in changeset.
Merge branch 'Build_Issue_Merging__DEN-12716-UI_BN_S70__to__staging' into develop

  1. … 1 more file in changeset.
DEN-13845: CRV: Merge issue of DEN-12716-UI_BN_S70 into staging

- Due to some enum changes, UI couldn't build

- An idea implemented to detect the enum changes by compiler. The implementation may be able to improve.

  1. … 12 more files in changeset.
DEN-13844: DEN-13774: VITALS numpad appears during rinseback if BP interval is on

- It was only working on the HDOpMode to be in-treatment, but needed to get the HDTreatmentState as well to make sure it is in Dialysis state too.

  1. … 7 more files in changeset.
DEN-13743: IMP: Mostly worked on Alarm Dialog/Bar

- Changed the Alarm Dialog (Title decreased by 4, Description increased by 4) / Bar (increased by 6) font size,

- Adjusted the AlarmDialog Timer position and layout.

- Removed the mouseArea from the WaitDone component.

- Added titel/description fontPixedSize for the NotificationDialog and NotificationBar

- Clear the reasontext on home screen when is not visible anymore.

- Clear the reasontext on SettingsDG when is not visible anymore.

- Used NotificationBarSmall instead of NotificationBar in:

- ModalDialog

- MainHome

- TreatmentAdjustmentBase

- TreatmentFlowBase

  1. … 15 more files in changeset.
DEN-13645: IMP: DEN-9297: Disinfection messaging flow review

- Disinfection current code/design review

- Disinfection Screens and Navigation implementation

- There are functions and properties used but not implemented yet in vDisinfectAdjustDisinfect, and some that are implemented are not implemented with the new design.

  1. … 7 more files in changeset.
DEN-13645 IMP: DEN-12958: UI shall generate the POST fail alarm if the SD-Card not present and stop logging

__________

- Log Export

- Added the Alarm generation on the GuiController if SD-Card is not ready, or is/becomes read-only.

- AlarmGenerator

- Added the SD-Card failure alarm - ALARM_ID_UI_POST_FAILURE_SDCARD

- Added alarm clear - ALARM_ID_NO_ALARM

- Added a flag to stop logging if the SD-Card is not ready or is readonly.

- Removed pause on log clean up.

- Improved the DeviceController SD-Card, USB status detection.

- Fixed and improved the MVC connection betweein device/Application/Gui controllers.

- A CLI switch ( -S ) added to disable the feature that is disabling the log if the SD-Card doesn't exist. So if the -S switch is used while calling the denali application, the logging will NOT be disabled, if SD-Card fails.

- In the ExportButton and USBButton(eject) removed the enable logic and has to be done outside of the component. It has been done for the Settings/export and Post-Tx/Review.

- Added title and file count for each SD-Card and USB-Drive panels.

__________

- Run.sh

- Added a check for the CloudSync and if the folder doesn't exist it won't do the rest

- Kill the denali application, in case it is still running.

- Added SD-Card type as part of its detection and if it is not ext4 format it fails the test.

- Optimized the mount point detection.

__________

- NoCANBus

- added the NoCANBus to the fault and init modes to not to navigate to those if NoCANBus is true. Otherwise it conflict with navigate to the home.

- Added a log in case the NoCANBus is enabled.

__________

- Settings

- Converted the '\n' in the settings values to actual newline character.

__________

- Thread:

- Moved the QuiController in its own thread, _Gui_Thread.

__________

- Alarms

- Added an emit to update the Alarm Dialog with the latest title/message, received from Alarms.conf In case there was an alarm before even Alarm.conf is read.

  1. … 27 more files in changeset.