sources

Clone Tools
  • last updated a few seconds ago
Constraints
Constraints: committers
 
Constraints: files
Constraints: dates
staging merge cherry pick - bugfix/DEN-16647-UI-BN-S115-R11

DEN-12728: UI: UI does not clean up Treatment Parameter settings for different patient

- After fixing the issue it was noticed that the border of the sliders with OFF button will remain highlighted.

DENBUG-183: Ultrafiltration resolution is not 0.1 when sliding from 0.0-0.1

DENBUG-120: UI: Cloud user has Read permissions to WiFi configuration

- passing only the interface name to make sure we match the permission has been given to the denali user in sudoers.

- the actual changes have been made in the ui.script/scripts/wifi_*.sh

DEN-12728: UI: UI does not clean up Treatment Parameter settings for different patient

Added the functionality to the TreatmentCreate to reset the scroll to top on clear the parameters.

DEN-16491: UI: During Rinseback setup, user cannot go back to treatment until they have viewed all Rinseback setup instructions

- Removed the restriction for Back Button on the Rinseback Setup screen, to let user go back without going through the entire instruction.

DEN-16656: UI: No Treatment log export success is displayed when exporting logs to a USB

added the export status to the notification text.

- started (in progress)

    • -1
    • +6
    ./gui/qml/pages/settings/SettingsExportLogs.qml
staging merge chery pick - DEN-16658-ui-dn-s116-sonar-fix-msg-update

DEN-16659: UI: Fix SonarQube Reported Issues

Changed the code in the geValue in the types.h to address the array index out of range reported by SonarQube.

Added the more functions to the tst_utilities.ccp to fully cover the getValue function.

DEN-16444: UI: UI Logs do not Capture TDi and TRo Moving Average Values

Updated the application to incorporate the two new float values in the DG temperature sensors payload.

DEN-16444: UI: UI Logs do not Capture TDi and TRo Moving Average Values

Updated the getValue function to updated the start index of the data.

DEN-16444: UI: UI Logs do not Capture TDi and TRo Moving Average Values

Updated the unit test functions for the getValue function.

DEN-16659: UI: Fix SonarQube Reported Issues

Changed the /tmp/ address and brought it into the main.cpp

DEN-16659: UI: Fix SonarQube Reported Issues

Removed a qDebug line

DEN-16659: UI: Fix SonarQube Reported Issues

Made the gStandard_tmp variable an extern

    • -0
    • +6
    ./gui/qml/dialogs/DiagnosticsDialog.qml
    • -0
    • +8
    ./model/dg/data/MDGTemperaturesData.cpp
    • -0
    • +2
    ./view/dg/data/VDGTemperaturesData.cpp
  1. … 3 more files in changeset.
Bamboo Commit: Updated MAlarmMapping.cpp

    • -14
    • +20
    ./model/hd/alarm/MAlarmMapping.cpp
Bamboo Commit: Updated the Copyright section and replaced tabs with 4 spaces

    • -1
    • +1
    ./gui/qml/dialogs/DiagnosticsDialog.qml
    • -20
    • +14
    ./model/hd/alarm/MAlarmMapping.cpp
DEN-16637, DEN-16640, DEN-16641 : P1_Staging Dry-Run found issues.

DEN-16637: SW: Top Alarm on Debug Screen Does Not Change When Alarm is Cleared

DEN-16640: SW: Blood Measurement Interval Set to OFF During Treatment When Set to 5 min in Pre-treatment

DEN-16641: UI: Heparin Syringe Installation Screen Missing

    • -1
    • +1
    ./gui/qml/dialogs/DiagnosticsDialog.qml
Bamboo Commit: Updated MAlarmMapping.cpp

Bamboo Commit: Updated MAlarmMapping.cpp

Bamboo Commit: Updated MAlarmMapping.cpp

    • -14
    • +20
    ./model/hd/alarm/MAlarmMapping.cpp
Bamboo Commit: Updated the Copyright section and replaced tabs with 4 spaces

    • -20
    • +14
    ./model/hd/alarm/MAlarmMapping.cpp
Bamboo Commit: Updated MAlarmMapping.cpp

Bamboo Commit: Updated MAlarmMapping.cpp

    • -14
    • +20
    ./model/hd/alarm/MAlarmMapping.cpp
Bamboo Commit: Updated the Copyright section and replaced tabs with 4 spaces

  1. … 598 more files in changeset.
DENBUG-204 updated the message payload of message 0x0B00 by adding an integer at the end of the structure

DENBUG-204 updated the diagnostics screens qml with the latest dialysate outlet pump broadcast changes

DENBUG-204 aligned the commented out code in the diagnostics qml

    • -0
    • +8
    ./gui/qml/dialogs/DiagnosticsDialog.qml
  1. … 1 more file in changeset.
DENBUG-182: Phantom Alarm Screen Appears After Clearing Last Alarm

DENBUG-185: UI shows version without period in between (ECO-11648, ECO-11616)

DENBUG-182: Phantom Alarm Screen Appears After Clearing Last Alarm

Addressing Code Review comments

Addressing code review comments

compatibility needs the separator before the value

DENBUG-182: Phantom Alarm Screen Appears After Clearing Last Alarm

- the order of the QML PROPERTYs cannot exactly predicted therefore setting them if not needed has to be avoided.

- a new method _init has been added to the PROPERTY_BASE to reset the property value without triggering the changed method so the property will get updated on the next round if the same value as before has been sent. ( the issue could be if code return after the alarmID = 0 on next alarm if the same ID send since the value is the same the QML will not get any signal to update, by changing the private property the signal will be triggered.)

DENBUG-182: Phantom Alarm Screen Appears After Clearing Last Alarm

- the order of the QML PROPERTYs cannot exactly predicted therefore setting them if not needed has to be avoided.

- set the alarmID to 0 to trigger the next change since we skip the property updated if the alarmID is 0.

DENBUG-182: Phantom Alarm Screen Appears After Clearing Last Alarm

    • -22
    • +27
    ./view/hd/alarm/VAlarmStatus.cpp
  1. … 1 more file in changeset.
DENBUG-75: UI: Treatment log data via USB does not match with data displayed on the Treatment Review Screen

CS-5: @ UI: TxCode generation on device

~ Added QRCode for the TxCode

- Added a Third-Party Open-Source MIT Licence QRCode generator from the following link:

* Copyright (c) Project Nayuki. (MIT License)

* https://www.nayuki.io/page/qr-code-generator-library

- Created a QRCode component

- Added the QRCode generation functionality in the GuiView

- Added QRCode for both the Pre-Tx-Confirmation (UI Generated) and Post-Tx-Review (CS received)

- Moved the CS TxCode Receive wait "..." from C++ to QML to keep the TxCode empty while wait to avoid displaying the "..." as a QRCode.

- Animated the CS TxCode Receive wait "..."

~ Added development testability for the CloudSync communication

~ Fixed the date change buf file watch to wait for the CS to get the checkin and create the out buf file.

CS-3: CS: Heparin OFF o the HCP portal Treatment report

- Fixed some issues in the create treatment screen on heparin type

- Combined the separated values for log and GUI into one values for both.

- Added the functionality for the TreatmentConfirm (Pre-Tx), TreatmentReview (Ppost-Tx), TreatmentReport (log) for the heparin values.

DENBUG-75: UI: Treatment log data via USB does not match with data displayed on the Treatment Review Screen

DENBUG-75: UI: Treatment log data via USB does not match with data displayed on the Treatment Review Screen

- removed the qtcode component from the two screen of the treatment confirm, review for P1 release.

    • -3
    • +14
    ./cloudsync/CloudSyncController.cpp
    • -4
    • +6
    ./gui/qml/components/GridSelection.qml
    • -0
    • +61
    ./gui/qml/components/QRCode.qml
    • -0
    • +830
    ./utility/qrcodegen.cpp
    • -0
    • +578
    ./utility/qrcodegen.h
  1. … 5 more files in changeset.
DENBUG-191: Treatment logs are not sent properly when Wifi connection is OFF and then reconnected

DEN-16527 UI: Retrieval of generated TxCode stored in the pending reports is invalid.

DEN-16530 UI: The Generated Tx Code seems cut off.

DEN-16532 UI: Remove any comma from the texts being added in the Treatment Report

DENBUG-207: UI: UI does not reset to default parameters upon new patient

DEN-12728: UI: UI does not clean up Treatment Parameter settings for different patient

- the reset is added to the treatment parameters

- the foundation of the pre-population has been added but still there is parts need to be added to store the sliders' On/Off switch to be restored which is needed for the slider to set properly.

    • -1
    • +6
    ./gui/qml/components/GridSelection.qml
DENBUG-179, DENBUG-79: Export dialog files count issues.

DENBUG-179: Export Logs text does not update after Factory Reset

DENBUG-79: UI: SD-Card file count increments when scrolling up and down the log file window

OPEN

    • -11
    • +7
    ./gui/qml/pages/settings/SettingsExportLogs.qml
DEN-16551: Wi-Fi security protocol TKIP encryption shall be removed.

DENBUG-204: UI: The reservoir message structure has changed on FW and UI needs to adjust.

DEN-16531: UI: The reservoir message structure has changed on FW and UI needs to adjust.

    • -12
    • +0
    ./model/dg/data/MDGReservoirData.cpp
DEN-16502: UI: CS: CloudSync out buff is created by UI which causes permission issue for CloudSync

- figured a way to delay the CS during normal bootup and reverted back the TODOs for the CS POST results.

    • -11
    • +7
    ./cloudsync/CloudSyncController.cpp
DEN-16502: UI: CS: CloudSync out buff is created by UI which causes permission issue for CloudSync

- Reverted back the version macros to use the bamboo env variables, to be consistent with other stacks

- Changed the DeviceController addWatch method to avoid creating file if does not exist, to prevent the permission denied issue when CS writes to the file, since if the file is created by denali, cloud does not have write access any more.

- Changed the execution order of the Application to be executed before CloudSync since in the new CS 0.4.6 it will error out and stop running because UI has not been executed to prepare the encrypted folder.

- Added a Check-In for the UI and CS to check if the CS is running and the above change will delay the post to be sent later when the check-in response is received.

- Added a TIME_CALL to call the method after each x times of call (is used in TimerEvent)

    • -15
    • +70
    ./cloudsync/CloudSyncController.cpp
  1. … 1 more file in changeset.
CS-5: UI: TxCode generation on device

- Fixed a typo on the "Tx Code" key

CS-5: UI: TxCode generation on device

    • -1
    • +1
    ./model/hd/data/MHDUsageInfoResponse.h
Bamboo Commit: Updated MAlarmMapping.cpp

    • -14
    • +20
    ./model/hd/alarm/MAlarmMapping.cpp
Bamboo Commit: Updated the Copyright section and replaced tabs with 4 spaces

    • -20
    • +14
    ./model/hd/alarm/MAlarmMapping.cpp
Bamboo Commit: Updated MAlarmMapping.cpp

    • -14
    • +20
    ./model/hd/alarm/MAlarmMapping.cpp
Bamboo Commit: Updated the Copyright section and replaced tabs with 4 spaces

    • -20
    • +14
    ./model/hd/alarm/MAlarmMapping.cpp
Bamboo Commit: Updated MAlarmMapping.cpp

    • -14
    • +20
    ./model/hd/alarm/MAlarmMapping.cpp
Bamboo Commit: Updated the Copyright section and replaced tabs with 4 spaces

    • -20
    • +14
    ./model/hd/alarm/MAlarmMapping.cpp