This is a list of all comments for HD-DEN-10602-1.

Review Summary: No summary


----------------------------------------
File: firmware/App/Modes/ModePostTreat.c
Revision Comment by Dara Navaei on 03 January 2022, 21:34 
https://devapps.diality.us/cru/HD-DEN-10602-1#c11627

  To make sure the order of math operations are correct, we
  should have () around the items that are multiplied and then
  divide it to the treatment duration.

  Reply by Behrouz NematiPour on 04 January 2022, 10:21
  > fixed

    Reply by Dara Navaei on 04 January 2022, 10:23
    > RESOLVED in CODE WALKTRHOUGH.

----------------------------------------
File: firmware/App/Modes/ModeTreatmentParams.c
Revision Comment by Dara Navaei on 03 January 2022, 21:45 
https://devapps.diality.us/cru/HD-DEN-10602-1#c11628

  Use () for the multiplication part.

  Reply by Behrouz NematiPour on 04 January 2022, 10:21
  > fixed.

    Reply by Dara Navaei on 04 January 2022, 10:23
    > RESOLVED in CODE WALKTRHOUGH.

----------------------------------------
File: HDDefs.h
Revision Comment by hnguyen on 16 December 2021, 14:44 
https://devapps.diality.us/cru/HD-DEN-10602-1#c11549

  Late breaking news, the HD_PRE_TREATMENT_PRIME_STATE_T has
  changed.
  The correct order of the items in enum type of the
  pre-treatment states are listed below:
  
      HD_PRIME_START_STATE = 0,
  ///< Prime start state
      HD_PRIME_WAIT_FOR_USER_START_STATE,
  ///< Wait for user to start prime state			
      HD_PRIME_SALINE_SETUP_STATE,
  ///< Saline setup state
      HD_PRIME_SALINE_PURGE_AIR_STATE,
  ///< Saline purge air state	
      HD_PRIME_SALINE_CIRC_BLOOD_CIRCUIT_STATE,
  ///< Circulate blood circuit state		
      HD_PRIME_RESERVOIR_ONE_FILL_COMPLETE_STATE,
  ///< Wait for reservoir 1 fill complete
      HD_PRIME_DIALYSATE_DIALYZER_STATE,
  ///< Dialysate dialyzer fluid path state
      HD_PRIME_SALINE_DIALYZER_SETUP_STATE,
  ///< Saline dialyzer setup state
      HD_PRIME_SALINE_DIALYZER_STATE,
  ///< Saline dialyzer fluid path state
      HD_PRIME_RESERVOIR_TWO_FILL_COMPLETE_STATE,
  ///< Wait for reservoir 2 fill complete		
      HD_PRIME_DIALYSATE_BYPASS_STATE,
  ///< Dialysate bypass fluid path state		
      HD_PRIME_WET_SELF_TESTS_STATE,
  ///< Perform wet self-tests after priming complete
      HD_PRIME_PAUSE,
  ///< Prime pause state, waits to be resumed
      HD_PRIME_COMPLETE,
  ///< Prime complete state
      NUM_OF_HD_PRIME_STATES
  ///< Number of prime sub-mode states

  Reply by Behrouz NematiPour on 16 December 2021, 15:27
  > After talking with Hung,
  > This change is currently on his feature branch and should not
  > be changed in here,
  > later which codes are merged it will be resolved in case of
  > conflict.

    Reply by hnguyen on 04 January 2022, 10:25
    > RESOLVED in CODE WALKTHROUGH.


---

ID: HD-DEN-10602-1 https://devapps.diality.us/cru/HD-DEN-10602-1

Title: HD-DEN-10602_UI Dev Add Patient ID Pre Treatment 
Statement of Objectives:


State: Closed

Summary: 

Author: Behrouz NematiPour
Moderator: Behrouz NematiPour
Reviewers: (0 active, 3 completed*)
     Sean Nash   (*)
     hnguyen   (*)
     Dara Navaei   (*)