Index: resources/settings/Instructions/Instructions.conf
===================================================================
diff -u -ra64c31ec79b3af203691f70397cc31f5727f47f4 -r7077e38c74db9cccb5496ffefcf8936c0916de76
--- resources/settings/Instructions/Instructions.conf	(.../Instructions.conf)	(revision a64c31ec79b3af203691f70397cc31f5727f47f4)
+++ resources/settings/Instructions/Instructions.conf	(.../Instructions.conf)	(revision 7077e38c74db9cccb5496ffefcf8936c0916de76)
@@ -1,10 +1,61 @@
+[Sample^Water Sample]
+Place cup in the water sampling pocket. Press and hold the "Water Sample" button. = water sampling_v2.png
+
+[Sample^Water Sample Result]
+Test the water sample per your clinic's instructions and enter the result. = temp_water_test.png
+
+[Sample^Water Sample Result Failed]
+Water sample result failed. = logo.png
+
+[Consumables^Consumables Installation]
+Open the DG concentrate door. = concentrate door open-v1.png
+Remove the bottom acid/bicarbonate cap. = remove Acid_Bicab  cap-v2.png
+Connect the acid concentrate to the acid port. = Acid line connect v2.png
+Connect the bicarbonate concentrate to the bicarbonate port. = Bicarb line connect v2.png
+
 [Disposables^Cartridge Installation]
-Unlock pump track, Lock pump track              =1.png
-Insert cartridge using alignment pins           =2.png
-HD machine door open / HD machine door closed   =3.png
+Open the front panel door. = door up v2.png
+Unlock the pump track by moving the lever to its upward position. = pump track lock_v1.png
+Install the cartirdge using the aligment pins. = cassette load_v1.png
+Lock the pump track by moving the lever to its downward position. = cassette clamp lock v2-01.png
 
 [Disposables^Cartridge Connection]
-Connect dialyzer v1                             = slide2_filter-connect_v1.png
+Insert dialyzer into the clamps. = filter load_72.png
+Connect the cartridge dialysis fluid and blood lines to the the dialyzer. = filter connect_72.png
+Connect the cartridge tubing line to air vent port. Unclamp the pinch clamp. = PBo connect_72.png
+Remove the top dialysis fluid cap. = remove top cap v1.png
+Connect the cartridge dialysis fluid lines to the DG fluid ports. = Dialysate lines to DG v2.png
 
-[Sample^Water Sample]
-Please follow the instruction to sample the water   = water sampling_v1.png 
+[Disposables^Heparin Syringe]
+Fill a syringe with heparin (1000 units/mL) and connect the cartridge heparin tubing line. = syringe connect_72.png
+Insert syringe into infusion pump housing. = syringe load_72.png
+
+[Disposables^Saline Bag]
+Spike a saline bag and connect it to the cartridge tubing. Hang the saline bag on the hook. = saline connect_72.png
+
+[Connection^Patient Connection]
+Establish vascular access per your clinic's instructions.
+Clamp lines and remove arterial and venous shunt. = untwist stunt_72.png
+Connect arterial and venous cartridge lines to your patient access lines. = alt connect fistula_72.png
+
+[Connection^Start Treatment]
+Unclamp patient lines and cartridge lines.= 
+
+[Disconnection^Patient Disconnection]
+Patient Disconnection=logo.png
+
+[Disposables^Disposables Removal]
+Disposables Removal1=logo.png
+Disposables Removal2=logo.png
+
+[Disinfection^Disinfection]
+Disinfection1=logo.png
+Disinfection2=logo.png
+Disinfection3=logo.png
+
+[Chemical Disinfect^Chemical Disinfect]
+Disinfection1=logo.png
+
+
+
+