Index: scripts/bluetooth_main.conf
===================================================================
diff -u
--- scripts/bluetooth_main.conf	(revision 0)
+++ scripts/bluetooth_main.conf	(revision 75218f0db0fed484f5ac55bcf997114f7881dba7)
@@ -0,0 +1,130 @@
+[General]
+
+# Default adapter name
+# Defaults to 'BlueZ X.YZ'
+Name = 'DEVICE_NAME'
+
+# Default device class. Only the major and minor device class bits are
+# considered. Defaults to '0x000000'.
+#Class = 0x000100
+
+# How long to stay in discoverable mode before going back to non-discoverable
+# The value is in seconds. Default is 180, i.e. 3 minutes.
+# 0 = disable timer, i.e. stay discoverable forever
+#DiscoverableTimeout = 0
+
+# Always allow pairing even if there are no agent registered
+# Possible values: true, false
+# Default: false
+AlwaysPairable = true
+
+# How long to stay in pairable mode before going back to non-discoverable
+# The value is in seconds. Default is 0.
+# 0 = disable timer, i.e. stay pairable forever
+#PairableTimeout = 0
+
+# Use vendor id source (assigner), vendor, product and version information for
+# DID profile support. The values are separated by ":" and assigner, VID, PID
+# and version.
+# Possible vendor id source values: bluetooth, usb (defaults to usb)
+#DeviceID = bluetooth:1234:5678:abcd
+
+# Do reverse service discovery for previously unknown devices that connect to
+# us. For BR/EDR this option is really only needed for qualification since the
+# BITE tester doesn't like us doing reverse SDP for some test cases, for LE
+# this disables the GATT client functionally so it can be used in system which
+# can only operate as peripheral.
+# Defaults to 'true'.
+#ReverseServiceDiscovery = true
+
+# Enable name resolving after inquiry. Set it to 'false' if you don't need
+# remote devices name and want shorter discovery cycle. Defaults to 'true'.
+#NameResolving = true
+
+# Enable runtime persistency of debug link keys. Default is false which
+# makes debug link keys valid only for the duration of the connection
+# that they were created for.
+DebugKeys = true
+
+# Restricts all controllers to the specified transport. Default value
+# is "dual", i.e. both BR/EDR and LE enabled (when supported by the HW).
+# Possible values: "dual", "bredr", "le"
+#ControllerMode = dual
+
+# Enables Multi Profile Specification support. This allows to specify if
+# system supports only Multiple Profiles Single Device (MPSD) configuration
+# or both Multiple Profiles Single Device (MPSD) and Multiple Profiles Multiple
+# Devices (MPMD) configurations.
+# Possible values: "off", "single", "multiple"
+# CHANGE_THIS_VALUE_TO: multiple
+MultiProfile = "multiple" 
+
+# Permanently enables the Fast Connectable setting for adapters that
+# support it. When enabled other devices can connect faster to us,
+# however the tradeoff is increased power consumptions. This feature
+# will fully work only on kernel version 4.1 and newer. Defaults to
+# 'false'.
+#FastConnectable = false
+
+# Default privacy setting.
+# Enables use of private address.
+# Possible values: "off", "device", "network"
+# "network" option not supported currently
+# Defaults to "off"
+# Privacy = off
+
+# Specify the policy to the JUST-WORKS repairing initiated by peer
+# Possible values: "never", "confirm", "always"
+# Defaults to "never"
+JustWorksRepairing = always
+
+[GATT]
+# GATT attribute cache.
+# Possible values:
+# always: Always cache attributes even for devices not paired, this is
+# recommended as it is best for interoperability, with more consistent
+# reconnection times and enables proper tracking of notifications for all
+# devices.
+# yes: Only cache attributes of paired devices.
+# no: Never cache attributes
+# Default: always
+#Cache = always
+
+# Minimum required Encryption Key Size for accessing secured characteristics.
+# Possible values: 0 and 7-16. 0 means don't care.
+# Defaults to 0
+#KeySize = 0
+
+# Exchange MTU size.
+# Possible values: 23-517
+# Defaults to 517
+#ExchangeMTU = 517
+
+# Number of ATT channels
+# Possible values: 1-5 (1 disables EATT)
+# Default to 3
+#Channels = 3
+
+[Policy]
+#
+# The ReconnectUUIDs defines the set of remote services that should try
+# to be reconnected to in case of a link loss (link supervision
+# timeout). The policy plugin should contain a sane set of values by
+# default, but this list can be overridden here. By setting the list to
+# empty the reconnection feature gets disabled.
+#ReconnectUUIDs=00001112-0000-1000-8000-00805f9b34fb,0000111f-0000-1000-8000-00805f9b34fb,0000110a-0000-1000-8000-00805f9b34fb
+
+# ReconnectAttempts define the number of attempts to reconnect after a link
+# lost. Setting the value to 0 disables reconnecting feature.
+#ReconnectAttempts=7
+
+# ReconnectIntervals define the set of intervals in seconds to use in between
+# attempts.
+# If the number of attempts defined in ReconnectAttempts is bigger than the
+# set of intervals the last interval is repeated until the last attempt.
+#ReconnectIntervals=1,2,4,8,16,32,64
+
+# AutoEnable defines option to enable all controllers when they are found.
+# This includes adapters present on start as well as adapters that are plugged
+# in later on. Defaults to 'false'.
+AutoEnable=true
Index: scripts/globals.sh
===================================================================
diff -u -rc9f8f8cf3c6c37fc6460d8675c62c9442c4d4263 -r75218f0db0fed484f5ac55bcf997114f7881dba7
--- scripts/globals.sh	(.../globals.sh)	(revision c9f8f8cf3c6c37fc6460d8675c62c9442c4d4263)
+++ scripts/globals.sh	(.../globals.sh)	(revision 75218f0db0fed484f5ac55bcf997114f7881dba7)
@@ -68,6 +68,7 @@
 DST_PATH_SCRIPTS="/home/$DST_USER/scripts"
 DST_PATH_CLOUDSYNC="/home/$DST_USER/cloudsync"
 DST_PATH_FONTS="/usr/share/fonts/truetype"
+DST_PATH_BT_CONF="/etc/bluetooth/"
 
 POSTLOG=$HOME/post.log
 POSTERR=$HOME/post.err
Index: scripts/start.sh
===================================================================
diff -u -rc9f8f8cf3c6c37fc6460d8675c62c9442c4d4263 -r75218f0db0fed484f5ac55bcf997114f7881dba7
--- scripts/start.sh	(.../start.sh)	(revision c9f8f8cf3c6c37fc6460d8675c62c9442c4d4263)
+++ scripts/start.sh	(.../start.sh)	(revision 75218f0db0fed484f5ac55bcf997114f7881dba7)
@@ -164,6 +164,15 @@
   copyFileTo    "setup.sh"              $DST_PATH_HOME
 }
 
+#TODO to be removed when yocto recipes updated
+function setupBluetoothConfFile() {
+  echo_dash_comment
+  echo_dash_message "Installing bluetooth conf file"                                    | tee -a $LOG_OUT_FILE
+  echo_dash_comment
+  copyFileTo   $SRC_PATH_SCRIPTS/"bluetooth_main.conf"  $DST_PATH_BT_CONF/main.conf
+
+}
+
 function setupSettingsScripts() {
   echo_dash_comment
   echo_dash_message "Installing settings scripts"                                        | tee -a $LOG_OUT_FILE
@@ -237,6 +246,7 @@
   setupBootupScripts
   setupSettingsScripts
   setupConfigurations
+  setupBluetoothConfFile
   setupCloudSync
   setupFonts