Index: firmware/App/Controllers/Heaters.c
===================================================================
diff -u -rd2f63f7b752a67a5805b5cb72afab07349afa408 -rcd7ff5665a2ac5142e29c0cad5339af0639e7c57
--- firmware/App/Controllers/Heaters.c	(.../Heaters.c)	(revision d2f63f7b752a67a5805b5cb72afab07349afa408)
+++ firmware/App/Controllers/Heaters.c	(.../Heaters.c)	(revision cd7ff5665a2ac5142e29c0cad5339af0639e7c57)
@@ -163,7 +163,6 @@
     initPersistentAlarm( ALARM_ID_DG_MAIN_PRIMARY_HEATER_VOLTAGE_OUT_OF_RANGE, HEATERS_VOLTAGE_OUT_OF_RANGE_TIMEOUT_MS, HEATERS_VOLTAGE_OUT_OF_RANGE_TIMEOUT_MS );
     initPersistentAlarm( ALARM_ID_DG_SMALL_PRIMARY_HEATER_VOLTAGE_OUT_OF_RANGE, HEATERS_VOLTAGE_OUT_OF_RANGE_TIMEOUT_MS, HEATERS_VOLTAGE_OUT_OF_RANGE_TIMEOUT_MS );
     initPersistentAlarm( ALARM_ID_DG_TRIMMER_HEATER_VOLTAGE_OUT_OF_RANGE, HEATERS_VOLTAGE_OUT_OF_RANGE_TIMEOUT_MS, HEATERS_VOLTAGE_OUT_OF_RANGE_TIMEOUT_MS );
-    initPersistentAlarm( ALARM_ID_DG_PRIMARY_HEATER_POWER_VOLTAGE_OUT_OF_RANGE, HEATERS_VOLTAGE_OUT_OF_RANGE_TIMEOUT_MS, HEATERS_VOLTAGE_OUT_OF_RANGE_TIMEOUT_MS );
     initPersistentAlarm( ALARM_ID_RO_FLOW_TOO_LOW_WHILE_PRIMARY_HEATER_IS_ON, HEATERS_ON_NO_FLOW_TIMEOUT_MS, HEATERS_ON_NO_FLOW_TIMEOUT_MS );
     initPersistentAlarm( ALARM_ID_DIALYSATE_FLOW_TOO_LOW_WHILE_TRIMMER_HEATER_IS_ON, HEATERS_ON_NO_FLOW_TIMEOUT_MS, HEATERS_ON_NO_FLOW_TIMEOUT_MS );
 
@@ -1024,17 +1023,6 @@
         checkPersistentAlarm( ALARM_ID_DG_MAIN_PRIMARY_HEATER_VOLTAGE_OUT_OF_RANGE,  isMainPriOut,  mainPriDC,  HEATERS_VOLTAGE_TOLERANCE_V );
         checkPersistentAlarm( ALARM_ID_DG_SMALL_PRIMARY_HEATER_VOLTAGE_OUT_OF_RANGE, isSmallPriOut, smallPriDC, HEATERS_VOLTAGE_TOLERANCE_V );
         checkPersistentAlarm( ALARM_ID_DG_TRIMMER_HEATER_VOLTAGE_OUT_OF_RANGE,       isTrimmerOut,  trimmerDC,  HEATERS_VOLTAGE_TOLERANCE_V );
-
-#ifndef _RELEASE_
-        if ( getHardwareConfigStatus() != HW_CONFIG_BETA )
-#endif
-        {
-            // If the system is DVT, check the primary heater's power line voltage
-            F32 powerMainPriVoltage = getMonitoredLineLevel( MONITORED_LINE_24V_POWER_PRIM_HTR_V );
-            BOOL isPriPowerOut      = ( fabs( powerMainPriVoltage - HEATERS_MAX_OPERATING_VOLTAGE_V ) > PRIMARY_HEATER_VOLTAGE_TOLERANCE_V ? TRUE : FALSE );
-
-            checkPersistentAlarm( ALARM_ID_DG_PRIMARY_HEATER_POWER_VOLTAGE_OUT_OF_RANGE, isPriPowerOut, powerMainPriVoltage, PRIMARY_HEATER_VOLTAGE_TOLERANCE_V );
-        }
     }
 }