Index: firmware/App/Modes/ModeFill.c
===================================================================
diff -u -ra9315539f527b92523b1598ff91e47db4d71dae2 -re0cdf49eb0f54239e5d765282e0952cea7ded1bd
--- firmware/App/Modes/ModeFill.c	(.../ModeFill.c)	(revision a9315539f527b92523b1598ff91e47db4d71dae2)
+++ firmware/App/Modes/ModeFill.c	(.../ModeFill.c)	(revision e0cdf49eb0f54239e5d765282e0952cea7ded1bd)
@@ -51,20 +51,20 @@
 
 #define CONCENTRATE_PUMP_PRIME_INTERVAL                 ( 3 * MS_PER_SECOND / TASK_GENERAL_INTERVAL )        ///< Persistent time interval for concentrate pumps prime.
 
-#define ACID_BICARB_CONCENTRATE_ADDITION_MULTIPLER      1.06                                                 ///< Acid and bicarbonate concentrates make up around 6% to total volume.
-#define FLOW_INTEGRATED_VOLUME_CHECK_TOLERANCE          0.1                                                  ///< Flow integrated volume has 10% tolerance compare to load cell reading.
+#define ACID_BICARB_CONCENTRATE_ADDITION_MULTIPLER      1.06F                                                ///< Acid and bicarbonate concentrates make up around 6% to total volume.
+#define FLOW_INTEGRATED_VOLUME_CHECK_TOLERANCE          0.1F                                                 ///< Flow integrated volume has 10% tolerance compare to load cell reading.
 
-#define CONCENTRATE_PUMP_PRIME_EXTRA_SPEED_ML_MIN       5.0                                                  ///< Concentrate pump additional speed during priming in mL/min.
+#define CONCENTRATE_PUMP_PRIME_EXTRA_SPEED_ML_MIN       5.0F                                                 ///< Concentrate pump additional speed during priming in mL/min.
 #define CONCENTRATE_TEST_TIME_OUT_MS                    ( 45 * MS_PER_SECOND )                               ///< Concentrate test time out period in ms.
 #define WATER_QUALITY_CHECK_TIME_OUT_MS                 ( 30 * MS_PER_SECOND )                               ///< Inlet water quality check time out period in ms.
 
-#define DIALYSATE_TEMPERATURE_TOLERANCE_C               2.0                                                  ///< Dialysate temperature tolerance in degree C.
-#define DIALYSATE_TEMPERATURE_SENSORS_MAX_DRIFT_C       2.0                                                  ///< Dialysate temperature sensors maximum allowed drift in C.
+#define DIALYSATE_TEMPERATURE_TOLERANCE_C               2.0F                                                 ///< Dialysate temperature tolerance in degree C.
+#define DIALYSATE_TEMPERATURE_SENSORS_MAX_DRIFT_C       2.0F                                                 ///< Dialysate temperature sensors maximum allowed drift in C.
 #define DIALYSATE_TEMPERATURE_SENSORS_DRIFT_TIMEOUT_MS  ( 10 * MS_PER_SECOND )                               ///< Dialysate temperature sensors drift timeout in milliseconds.
 
-#define ACID_CONCENTRATION_BOTTLE_VOLUME_ML             3000.0                                               ///< Volume of acid concentration in ml.
-#define BICARB_CONCENTRATION_BOTTLE_VOLUME_ML           3000.0                                               ///< Volume of bicarb concentration in ml.
-#define CONCENTRATION_BOTTLE_LOW_VOLUME_ML              100.0                                                ///< Concentration bottle low volume in ml.
+#define ACID_CONCENTRATION_BOTTLE_VOLUME_ML             3000.0F                                              ///< Volume of acid concentration in ml.
+#define BICARB_CONCENTRATION_BOTTLE_VOLUME_ML           3000.0F                                              ///< Volume of bicarb concentration in ml.
+#define CONCENTRATION_BOTTLE_LOW_VOLUME_ML              100.0F                                               ///< Concentration bottle low volume in ml.
 
 /// Multiplier to convert flow (mL/min) into volume (mL) for period of general task interval.
 static const F32 FLOW_INTEGRATOR = ( (F32)TASK_GENERAL_INTERVAL / (F32)( SEC_PER_MIN * MS_PER_SECOND ) );
@@ -139,7 +139,7 @@
 
     initPersistentAlarm( ALARM_ID_ACID_CONDUCTIVITY_OUT_OF_RANGE, 0, EMPTY_BOTTLE_DETECT_PERSISTENT_PERIOD_MS );
     initPersistentAlarm( ALARM_ID_BICARB_CONDUCTIVITY_OUT_OF_RANGE, 0, EMPTY_BOTTLE_DETECT_PERSISTENT_PERIOD_MS );
-    initPersistentAlarm( ALARM_ID_DG_DIALYSATE_TEMPERATURE_SENSORS_DRFIT_TIMEOUT, 0, DIALYSATE_TEMPERATURE_SENSORS_DRIFT_TIMEOUT_MS );
+    //initPersistentAlarm( ALARM_ID_DG_DIALYSATE_TEMPERATURE_SENSORS_DRFIT_TIMEOUT, 0, DIALYSATE_TEMPERATURE_SENSORS_DRIFT_TIMEOUT_MS );
 }
 
 /*********************************************************************//**