Index: firmware/App/Services/FPGA.c
===================================================================
diff -u -ra7bf3ca23ea37a61000379facae628a31b3ecc59 -r30fd485858736c08d8bc4fe8bcb94cf1b545492e
--- firmware/App/Services/FPGA.c	(.../FPGA.c)	(revision a7bf3ca23ea37a61000379facae628a31b3ecc59)
+++ firmware/App/Services/FPGA.c	(.../FPGA.c)	(revision 30fd485858736c08d8bc4fe8bcb94cf1b545492e)
@@ -601,21 +601,25 @@
     memcpy( &( fpgaWriteCmdBuffer[ FPGA_WRITE_CMD_HDR_LEN ] ), &fpgaActuatorSetPoints, sizeof( FPGA_ACTUATORS_T ) );
     crc = crc16( fpgaWriteCmdBuffer, FPGA_WRITE_CMD_HDR_LEN + sizeof( FPGA_ACTUATORS_T ) );
     fpgaWriteCmdBuffer[ FPGA_WRITE_CMD_HDR_LEN + sizeof( FPGA_ACTUATORS_T ) ] = GET_MSB_OF_WORD( crc );
-    fpgaWriteCmdBuffer[ FPGA_WRITE_CMD_HDR_LEN + sizeof( FPGA_ACTUATORS_T ) + 1 ] = GET_LSB_OF_WORD( crc );
+    fpgaWriteCmdBuffer[ FPGA_WRITE_CMD_HDR_LEN + sizeof( FPGA_ACTUATORS_T ) + 1 ] = GET_LSB_OF_WORD( crc );
+
     // construct bulk read command to read sensor data registers starting at address 8
     fpgaReadCmdBuffer[ 0 ] = FPGA_READ_CMD_CODE;
     fpgaReadCmdBuffer[ 1 ] = GET_LSB_OF_WORD( FPGA_BULK_READ_START_ADDR );
     fpgaReadCmdBuffer[ 2 ] = GET_MSB_OF_WORD( FPGA_BULK_READ_START_ADDR );
     fpgaReadCmdBuffer[ 3 ] = sizeof(DG_FPGA_SENSORS_T);
     crc = crc16( fpgaReadCmdBuffer, FPGA_READ_CMD_HDR_LEN );
     fpgaReadCmdBuffer[ 4 ] = GET_MSB_OF_WORD( crc );
-    fpgaReadCmdBuffer[ 5 ] = GET_LSB_OF_WORD( crc );
+    fpgaReadCmdBuffer[ 5 ] = GET_LSB_OF_WORD( crc );
+
     // prep DMA for sending the bulk write cmd and receiving its response
     setupDMAForWriteCmd( FPGA_WRITE_CMD_HDR_LEN + sizeof( FPGA_ACTUATORS_T ) + FPGA_CRC_LEN );
-    setupDMAForWriteResp( FPGA_WRITE_RSP_HDR_LEN + FPGA_CRC_LEN );
+    setupDMAForWriteResp( FPGA_WRITE_RSP_HDR_LEN + FPGA_CRC_LEN );
+
     // prep DMA for sending the bulk read cmd and receiving its response
     setupDMAForReadCmd( FPGA_READ_CMD_HDR_LEN + FPGA_CRC_LEN );
-    setupDMAForReadResp( FPGA_READ_RSP_HDR_LEN + sizeof( DG_FPGA_SENSORS_T ) + FPGA_CRC_LEN );
+    setupDMAForReadResp( FPGA_READ_RSP_HDR_LEN + sizeof( DG_FPGA_SENSORS_T ) + FPGA_CRC_LEN );
+
     // set fpga comm flags for bulk write cmd and follow-up bulk read command
     fpgaWriteCommandInProgress = TRUE;
     fpgaBulkWriteAndReadInProgress = TRUE;
@@ -1385,4 +1389,33 @@
 U16 getFPGATrimmerColdJunctionTemp ( void )
 {
     return fpgaSensorReadings.fpgaTrimmerHeaterIntJunctionTemp;
-}
+}
+
+/*************************************************************************
+ * @brief
+ * The getFPGACPiReadCount function gets inlet water conductivity sensor
+ * read count
+ * @details
+ * Inputs : fpgaSensorReadings.fpgaCPiReadCnt
+ * Outputs : none
+ * @param none
+ * @return Last inlet water conductivity sensor read count
+ *************************************************************************/
+U08 getFPGACPiReadCount ( void )
+{
+    return fpgaSensorReadings.fpgaCPiReadCnt;
+}
+
+/*************************************************************************
+ * @brief
+ * The getFPGACPi function gets inlet water conductivity value
+ * @details
+ * Inputs : fpgaSensorReadings.fpgaCPi
+ * Outputs : none
+ * @param none
+ * @return Last inlet water conductivity value
+ *************************************************************************/
+U32 getFPGACPi ( void )
+{
+    return fpgaSensorReadings.fpgaCPi;
+}