Index: firmware/App/Services/SystemComm.c
===================================================================
diff -u -r59543c15efd37e0e23269768df9a1cb9b6a3d296 -r41303661b97e17dae2b911a6538997d67960f377
--- firmware/App/Services/SystemComm.c	(.../SystemComm.c)	(revision 59543c15efd37e0e23269768df9a1cb9b6a3d296)
+++ firmware/App/Services/SystemComm.c	(.../SystemComm.c)	(revision 41303661b97e17dae2b911a6538997d67960f377)
@@ -825,7 +825,7 @@
     if ( TRUE == didTimeout( timeOfLastHDCheckIn, HD_COMM_TIMEOUT_IN_MS ) )
     {
         hdIsCommunicating = FALSE;
-        activateAlarmNoData( ALARM_ID_HD_COMM_TIMEOUT );
+        //activateAlarmNoData( ALARM_ID_HD_COMM_TIMEOUT );
     }
 }
 
@@ -950,7 +950,7 @@
                 U16 msgID;
 
                 memcpy( &msgID, &pendingAckList[ i ].msg[ sizeof( U08 ) + sizeof( U16) ], sizeof( U16 ) );
-                SET_ALARM_WITH_1_U32_DATA( ALARM_ID_CAN_MESSAGE_NOT_ACKED, (U32)msgID );
+                //SET_ALARM_WITH_1_U32_DATA( ALARM_ID_CAN_MESSAGE_NOT_ACKED, (U32)msgID ); TODO uncomment this unit 2 raises this alarm no HD
                 pendingAckList[ i ].used = FALSE;  // take pending message off of list
             }
         }
@@ -1105,7 +1105,7 @@
                 break;
 
             case MSG_ID_DRAIN_PUMP_SET_RPM:
-                // TODO This function is implemented in DEN-9480
+                handleTestSetDrainPumpRPM( message );
                 break;
 
             case MSG_ID_DRAIN_PUMP_SEND_INTERVAL_OVERRIDE:
@@ -1125,23 +1125,23 @@
                 break;
 
             case MSG_ID_TEMPERATURE_SENSORS_VALUE_OVERRIDE:
-                handleTestTemperatureSensorsOverrideRequest ( message );
+                handleTestTemperatureSensorsOverrideRequest( message );
                 break;
 
             case MSG_ID_TEMPERATURE_SENSORS_PUBLISH_INTERVAL_OVERRIDE:
-                handleTestTemperatureSensorsDataPublishOverrideRequest ( message );
+                handleTestTemperatureSensorsDataPublishOverrideRequest( message );
                 break;
 
             case MSG_ID_HEATERS_PUBLISH_INTERVAL_ORVERRIDE:
-                handleTestHeatersDataPublishOverrideRequest ( message );
+                handleTestHeatersDataPublishOverrideRequest( message );
                 break;
 
             case MSG_ID_CONDUCTIVITY_OVERRIDE:
-                handleTestSetConductivityOverrideRequest ( message );
+                handleTestSetConductivityOverrideRequest( message );
                 break;
 
             case MSG_ID_CONDUCTIVITY_PUBLISH_INTERVAL_OVERRIDE:
-                handleTestSetConductivityDataPublishIntervalOverrideRequest ( message );
+                handleTestSetConductivityDataPublishIntervalOverrideRequest( message );
                 break;
 
             case MSG_ID_DG_ACCEL_OVERRIDE:
@@ -1165,7 +1165,8 @@
                 break;
 
             case MSG_ID_DRAIN_PUMP_TARGET_OUTLET_PRESSURE:
-                // The function was implemented in DEN-9480
+
+                handleSetDrainPumpTargetOutletPressure( message );
                 break;
 
             case MSG_ID_DG_SWITCHES_STATUS_OVERRIDE:
@@ -1213,7 +1214,7 @@
                 break;
 
             case MSG_ID_DG_RO_FLOW_RATE_OVERRIDE:
-                handleTestMeasuredROFlowRateOverride( message );
+                handleTestROMeasuredFlowOverrideRequest( message );
                 break;
 
             case MSG_ID_DG_SET_RO_PUMP_TARGET_FLOW:
@@ -1288,6 +1289,14 @@
                 handleTestBlockMessagesRequest( message );
                 break;
 
+            case MSG_ID_DG_STOP_RTC_CLOCK:
+                handleStopDGRTCClock( message );
+                break;
+
+            case MSG_ID_DG_DRAIN_PUMP_MEASURED_RPM_OVERRIDE:
+                handleSetDrainPumpMeasuredRPMOverrideRequest( message );
+                break;
+
             default:
                 // TODO - unrecognized message ID received - ignore
                 break;