Index: firmware/source/can.c
===================================================================
diff -u -r6d2d8f0267c57135554e5a1acaca9aef37f27949 -rc0160362dc799802ec589d5b6cf4c2bd1face77e
--- firmware/source/can.c	(.../can.c)	(revision 6d2d8f0267c57135554e5a1acaca9aef37f27949)
+++ firmware/source/can.c	(.../can.c)	(revision c0160362dc799802ec589d5b6cf4c2bd1face77e)
@@ -180,7 +180,7 @@
                          | (uint32)0x00000000U;
 
     /** - Setup auto bus on timer period */
-    canREG1->ABOTR = (uint32)1033350U;
+    canREG1->ABOTR = (uint32)1040000U;
 
     /** - Initialize message 1 
     *     - Wait until IF1 is ready for use 
@@ -311,7 +311,7 @@
     } /* Wait */
 
     canREG1->IF1MSK  = 0xC0000000U | (uint32)((uint32)((uint32)0x000007FFU & (uint32)0x000007FFU) << (uint32)18U);
-    canREG1->IF1ARB  = (uint32)0x80000000U | (uint32)0x00000000U | (uint32)0x20000000U | (uint32)((uint32)((uint32)0x80U & (uint32)0x000007FFU) << (uint32)18U);
+    canREG1->IF1ARB  = (uint32)0x80000000U | (uint32)0x00000000U | (uint32)0x20000000U | (uint32)((uint32)((uint32)0x70U & (uint32)0x000007FFU) << (uint32)18U);
     canREG1->IF1MCTL = 0x00001000U | (uint32)0x00000800U | (uint32)0x00000000U | (uint32)0x00000080U | (uint32)8U;
     canREG1->IF1CMD  = (uint8) 0xF8U;
     canREG1->IF1NO   = 7U;
@@ -330,8 +330,8 @@
     } /* Wait */
 
     canREG1->IF2MSK  = 0xC0000000U | (uint32)((uint32)((uint32)0x000007FFU & (uint32)0x000007FFU) << (uint32)18U);
-    canREG1->IF2ARB  = (uint32)0x80000000U | (uint32)0x00000000U | (uint32)0x00000000U | (uint32)((uint32)((uint32)0x200U & (uint32)0x000007FFU) << (uint32)18U);
-    canREG1->IF2MCTL = 0x00001000U | (uint32)0x00000400U | (uint32)0x00000000U | (uint32)0x00000080U | (uint32)8U;
+    canREG1->IF2ARB  = (uint32)0x80000000U | (uint32)0x00000000U | (uint32)0x20000000U | (uint32)((uint32)((uint32)0x80U & (uint32)0x000007FFU) << (uint32)18U);
+    canREG1->IF2MCTL = 0x00001000U | (uint32)0x00000800U | (uint32)0x00000000U | (uint32)0x00000080U | (uint32)8U;
     canREG1->IF2CMD  = (uint8) 0xF8U;
     canREG1->IF2NO   = 8U;
 
@@ -349,7 +349,7 @@
     } /* Wait */
 
     canREG1->IF1MSK  = 0xC0000000U | (uint32)((uint32)((uint32)0x000007FFU & (uint32)0x000007FFU) << (uint32)18U);
-    canREG1->IF1ARB  = (uint32)0x80000000U | (uint32)0x00000000U | (uint32)0x00000000U | (uint32)((uint32)((uint32)0x402U & (uint32)0x000007FFU) << (uint32)18U);
+    canREG1->IF1ARB  = (uint32)0x80000000U | (uint32)0x00000000U | (uint32)0x00000000U | (uint32)((uint32)((uint32)0x110U & (uint32)0x000007FFU) << (uint32)18U);
     canREG1->IF1MCTL = 0x00001000U | (uint32)0x00000400U | (uint32)0x00000000U | (uint32)0x00000080U | (uint32)8U;
     canREG1->IF1CMD  = (uint8) 0xF8U;
     canREG1->IF1NO   = 9U;
@@ -368,10 +368,48 @@
     } /* Wait */
 
     canREG1->IF2MSK  = 0xC0000000U | (uint32)((uint32)((uint32)0x000007FFU & (uint32)0x000007FFU) << (uint32)18U);
+    canREG1->IF2ARB  = (uint32)0x80000000U | (uint32)0x00000000U | (uint32)0x00000000U | (uint32)((uint32)((uint32)0x200U & (uint32)0x000007FFU) << (uint32)18U);
+    canREG1->IF2MCTL = 0x00001000U | (uint32)0x00000400U | (uint32)0x00000000U | (uint32)0x00000080U | (uint32)8U;
+    canREG1->IF2CMD  = (uint8) 0xF8U;
+    canREG1->IF2NO   = 10U;
+
+    /** - Initialize message 11 
+    *     - Wait until IF1 is ready for use 
+    *     - Set message mask
+    *     - Set message control word
+    *     - Set message arbitration
+    *     - Set IF1 control byte
+    *     - Set IF1 message number
+    */
+    /*SAFETYMCUSW 28 D MR:NA <APPROVED> "Potentially infinite loop found - Hardware Status check for execution sequence" */
+    while ((canREG1->IF1STAT & 0x80U) ==0x80U)
+    { 
+    } /* Wait */
+
+    canREG1->IF1MSK  = 0xC0000000U | (uint32)((uint32)((uint32)0x000007FFU & (uint32)0x000007FFU) << (uint32)18U);
+    canREG1->IF1ARB  = (uint32)0x80000000U | (uint32)0x00000000U | (uint32)0x00000000U | (uint32)((uint32)((uint32)0x402U & (uint32)0x000007FFU) << (uint32)18U);
+    canREG1->IF1MCTL = 0x00001000U | (uint32)0x00000400U | (uint32)0x00000000U | (uint32)0x00000080U | (uint32)8U;
+    canREG1->IF1CMD  = (uint8) 0xF8U;
+    canREG1->IF1NO   = 11U;
+
+    /** - Initialize message 12 
+    *     - Wait until IF2 is ready for use 
+    *     - Set message mask
+    *     - Set message control word
+    *     - Set message arbitration
+    *     - Set IF2 control byte
+    *     - Set IF2 message number
+    */
+    /*SAFETYMCUSW 28 D MR:NA <APPROVED> "Potentially infinite loop found - Hardware Status check for execution sequence" */
+    while ((canREG1->IF2STAT & 0x80U) ==0x80U)
+    { 
+    } /* Wait */
+
+    canREG1->IF2MSK  = 0xC0000000U | (uint32)((uint32)((uint32)0x000007FFU & (uint32)0x000007FFU) << (uint32)18U);
     canREG1->IF2ARB  = (uint32)0x80000000U | (uint32)0x00000000U | (uint32)0x20000000U | (uint32)((uint32)((uint32)0x403U & (uint32)0x000007FFU) << (uint32)18U);
     canREG1->IF2MCTL = 0x00001000U | (uint32)0x00000800U | (uint32)0x00000000U | (uint32)0x00000080U | (uint32)8U;
     canREG1->IF2CMD  = (uint8) 0xF8U;
-    canREG1->IF2NO   = 10U;
+    canREG1->IF2NO   = 12U;
 
     /** - Setup IF1 for data transmission 
     *     - Wait until IF1 is ready for use 
@@ -401,10 +439,10 @@
     *     - Setup baud rate prescaler
     */
     canREG1->BTR = (uint32)((uint32)0U << 16U) |
-                   (uint32)((uint32)(3U - 1U) << 12U) |
-                   (uint32)((uint32)((2U + 3U) - 1U) << 8U) |
-                   (uint32)((uint32)(3U - 1U) << 6U) |
-                   (uint32)45U;
+                   (uint32)((uint32)(2U - 1U) << 12U) |
+                   (uint32)((uint32)((3U + 2U) - 1U) << 8U) |
+                   (uint32)((uint32)(2U - 1U) << 6U) |
+                   (uint32)51U;
 
 
      /** - CAN1 Port output values */
@@ -1545,8 +1583,6 @@
 /** @fn void can1HighLevelInterrupt(void)
 *   @brief CAN1 Level 0 Interrupt Handler
 */
-#pragma CODE_STATE(can1HighLevelInterrupt, 32)
-#pragma INTERRUPT(can1HighLevelInterrupt, FIQ)
 
 /* SourceId : CAN_SourceId_020 */
 /* DesignId : CAN_DesignId_018 */
@@ -1607,8 +1643,6 @@
 /** @fn void can1LowLevelInterrupt(void)
 *   @brief CAN1 Level 1 Interrupt Handler
 */
-#pragma CODE_STATE(can1LowLevelInterrupt, 32)
-#pragma INTERRUPT(can1LowLevelInterrupt, FIQ)
 
 /* SourceId : CAN_SourceId_021 */
 /* DesignId : CAN_DesignId_019 */