Index: dialin/dg/fluid_leak.py
===================================================================
diff -u -r3a70bfb451b74106348c064c34f19934aadd9119 -r58c1ab4af02604a194ae45f5d6c8d7e95c40c9e2
--- dialin/dg/fluid_leak.py	(.../fluid_leak.py)	(revision 3a70bfb451b74106348c064c34f19934aadd9119)
+++ dialin/dg/fluid_leak.py	(.../fluid_leak.py)	(revision 58c1ab4af02604a194ae45f5d6c8d7e95c40c9e2)
@@ -75,20 +75,20 @@
 
         self.fluid_leak_state = state[0]
 
-    def cmd_fluid_leak_detector_override(self, detected: int, reset: int = NO_RESET) -> int:
+    def cmd_fluid_leak_detector_override(self, detected_state: int, reset: int = NO_RESET) -> int:
         """
         Constructs and sends the fluid leak detector state override command
         Constraints:
             Must be logged into DG.
             Given detector must be one of the detectors listed below.
 
-        @param detected:  unsigned int - detected (0=wet, 1=dry) to override detector with
+        @param detected_state:  unsigned int - detected (0=wet, 1=dry) to override detector with
         @param reset:  integer - 1 to reset a previous override, 0 to override
         @return: 1 if successful, zero otherwise
         """
 
         rst = integer_to_bytearray(reset)
-        det = integer_to_bytearray(detected)
+        det = integer_to_bytearray(detected_state)
         payload = rst + det
 
         message = DenaliMessage.build_message(channel_id=DenaliChannels.dialin_to_dg_ch_id,
Index: dialin/hd/fluid_leak.py
===================================================================
diff -u -r3a70bfb451b74106348c064c34f19934aadd9119 -r58c1ab4af02604a194ae45f5d6c8d7e95c40c9e2
--- dialin/hd/fluid_leak.py	(.../fluid_leak.py)	(revision 3a70bfb451b74106348c064c34f19934aadd9119)
+++ dialin/hd/fluid_leak.py	(.../fluid_leak.py)	(revision 58c1ab4af02604a194ae45f5d6c8d7e95c40c9e2)
@@ -75,20 +75,20 @@
 
         self.fluid_leak_state = state[0]
 
-    def cmd_fluid_leak_detector_override(self, detected: int, reset: int = NO_RESET) -> int:
+    def cmd_fluid_leak_detector_override(self, detected_state: int, reset: int = NO_RESET) -> int:
         """
         Constructs and sends the fluid leak detector state override command
         Constraints:
             Must be logged into HD.
             Given detector must be one of the detectors listed below.
 
-        @param detected:  unsigned int - detected (0=wet, 1=dry) to override detector with
+        @param detected_state:  unsigned int - detected (0=wet, 1=dry) to override detector with
         @param reset:  integer - 1 to reset a previous override, 0 to override
         @return: 1 if successful, zero otherwise
         """
 
         rst = integer_to_bytearray(reset)
-        det = integer_to_bytearray(detected)
+        det = integer_to_bytearray(detected_state)
         payload = rst + det
 
         message = DenaliMessage.build_message(channel_id=DenaliChannels.dialin_to_hd_ch_id,