Index: firmware/App/Drivers/InternalADC.h
===================================================================
diff -u -rf3326a3d0fd2a465a518e31ee578e335db301c27 -r9f2e4e5933d2e418b75f91e3db5df69c71878d43
--- firmware/App/Drivers/InternalADC.h	(.../InternalADC.h)	(revision f3326a3d0fd2a465a518e31ee578e335db301c27)
+++ firmware/App/Drivers/InternalADC.h	(.../InternalADC.h)	(revision 9f2e4e5933d2e418b75f91e3db5df69c71878d43)
@@ -46,17 +46,17 @@
     INT_ADC_DIAL_IN_PUMP_MOTOR_CURRENT,                 ///< Internal ADC channel for dialysate inlet pump current
     INT_ADC_DIAL_OUT_PUMP_SPEED,                        ///< Internal ADC channel for dialysate outlet pump speed
     INT_ADC_DIAL_OUT_PUMP_MOTOR_CURRENT,                ///< Internal ADC channel for dialysate outlet pump current
-    INT_ADC_PS_THERMISTOR,                              ///< Internal ADC channel for trimmer heater temperature (primary)
-    INT_ADC_REFIN_1,                                    ///< Internal ADC channel for reference voltage to LCA1 & LCB1 (primary load cell ADC channels)
-    INT_ADC_24V_ACTUATORS_REG,                          ///< Internal ADC channel for reference voltage to LCA2 & LCB2 (redundant load cell ADC channels)
+    INT_ADC_PS_THERMISTOR,                              ///< Internal ADC channel for power supply temperature
+    INT_ADC_PBA_ADC_REF,                                ///< Internal ADC channel for reference voltage to PBA ADC channel)
+    INT_ADC_24V_ACTUATORS_REG,                          ///< Internal ADC channel for 24V regen (diode drop) to actuators
     INT_ADC_1_2V_PROCESSOR,                             ///< Internal ADC channel for 1.2V to processor
     INT_ADC_5V_SENSORS,                                 ///< Internal ADC channel for 5V to sensors
-    INT_ADC_PRIMARY_ALARM_CURRENT_HG,                   ///< Internal ADC channel for primary alarm audio current HG
-    INT_ADC_BOARD_THERMISTOR,                           ///< Internal ADC channel for trimmer heater temperature (redundant)
+    INT_ADC_PRIMARY_ALARM_CURRENT_HG,                   ///< Internal ADC channel for primary alarm audio current high gain
+    INT_ADC_BOARD_THERMISTOR,                           ///< Internal ADC channel for PCB temperature
     INT_ADC_FPGA_ADC_REF,                               ///< Internal ADC channel for FPGA ADC reference voltage
     INT_ADC_3_3V,                                       ///< Internal ADC channel for 3.3V
     INT_ADC_5V_LOGIC,                                   ///< Internal ADC channel for 5V to logic
-    INT_ADC_PRIMARY_ALARM_CURRENT_LG,                   ///< Internal ADC channel for primary alarm audio current LG
+    INT_ADC_PRIMARY_ALARM_CURRENT_LG,                   ///< Internal ADC channel for primary alarm audio current low gain
     INT_ADC_24V_ACTUATORS,                              ///< Internal ADC channel for 24V to actuators
     INT_ADC_BACKUP_ALARM_CURRENT,                       ///< Internal ADC channel for backup alarm audio current
     NUM_OF_INT_ADC_CHANNELS                             ///< Number of used internal ADC channels.