Index: firmware/App/HDCommon.h
===================================================================
diff -u -ra19c47327274581b5570b685731ea358a4c13b61 -r1c31bae22357f3d032ee615ddf28ab5a1d434288
--- firmware/App/HDCommon.h	(.../HDCommon.h)	(revision a19c47327274581b5570b685731ea358a4c13b61)
+++ firmware/App/HDCommon.h	(.../HDCommon.h)	(revision 1c31bae22357f3d032ee615ddf28ab5a1d434288)
@@ -48,15 +48,15 @@
 //    #define DISABLE_CRC_ERROR               1           // Do not error on bad CRC for CAN messages
     #define DISABLE_ACK_ERRORS              1           // Do not error on failure of other node(s) to ACK a message
     #define DISABLE_MOTOR_CURRENT_CHECKS    1           // Do not error on HD pump current checks
-//    #define DISABLE_PUMP_FLOW_CHECKS        1           // Do not error on HD pump flow checks
+    #define DISABLE_PUMP_FLOW_CHECKS        1           // Do not error on HD pump flow checks
 //    #define DISABLE_PUMP_SPEED_CHECKS       1           // Do not error on HD pump speed checks
 //    #define DISABLE_PUMP_DIRECTION_CHECKS   1           // Do not error on HD pump direction checks
     #define DISABLE_SYRINGE_PUMP            1           // Disable syringe pump functionality
     #define ALWAYS_ALLOW_SYRINGE_PUMP_CMDS  1           // Allow syringe pump commands at any time except when pump is busy
     #define DISABLE_PRESSURE_CHECKS         1           // Do not error on HD pressure checks
 //    #define DISABLE_UF_ALARMS               1           // Do not error on HD ultrafiltration checks
     #define DISABLE_DIALYSATE_TEMP_CHECK    1           // Disable dialysate temperature check
-//    #define DISABLE_VALVE_ALARMS            1           // Do not error on HD valve position
+    #define DISABLE_VALVE_ALARMS            1           // Do not error on HD valve position
     #define SKIP_CAL_CHECK               1
 //    #define RUN_PUMPS_OPEN_LOOP             1           // BP and DPi pumps will be run open loop (no flow sensor feedback)
 //    #define RAW_FLOW_SENSOR_DATA            1           // Test build will not filter flow sensor data