Index: firmware/App/HDCommon.h
===================================================================
diff -u -ra654052095e4c8e801bad6e8097decc7ee415914 -r5c2822d5c0c20c0bb3c668ee2dba6eaeafdce986
--- firmware/App/HDCommon.h	(.../HDCommon.h)	(revision a654052095e4c8e801bad6e8097decc7ee415914)
+++ firmware/App/HDCommon.h	(.../HDCommon.h)	(revision 5c2822d5c0c20c0bb3c668ee2dba6eaeafdce986)
@@ -53,7 +53,7 @@
     #define DISABLE_PUMP_DIRECTION_CHECKS   1           // Do not error on HD pump direction checks
     #define DISABLE_SYRINGE_PUMP            1           // Disable syringe pump functionality
     #define ALWAYS_ALLOW_SYRINGE_PUMP_CMDS  1           // Allow syringe pump commands at any time except when pump is busy
-    #define DISABLE_PRESSURE_CHECKS         1           // Do not error on HD pressure checks
+//    #define DISABLE_PRESSURE_CHECKS         1           // Do not error on HD pressure checks
     #define DISABLE_UF_ALARMS               1           // Do not error on HD ultrafiltration checks
     #define DISABLE_VALVE_ALARMS            1           // Do not error on HD valve position
     #define DISABLE_CAL_CHECK               1           // Disable calibration checks
@@ -64,13 +64,13 @@
     #define ALARMS_DEBUG                    1           // Triggered alarms sent to debug UART
     #define ALARM_VOLUME_DEFAULT_LOW        1           // Set default alarm volume to lowest
 //    #define TEMP_UI_ALARM_SILENCE_FIX       1           // Temporary UI fix for handling alarm silence request msg
-//    #define SKIP_PRIMING                    1           // Skip Pre-treatment Prime
+    #define SKIP_PRIMING                    1           // Skip Pre-treatment Prime
     #define SKIP_WET_SELF_TESTS             1           // Skip Pre-treatment prime wet self-tests
 //    #define V2_0_SYSTEM                     1           // Build for v2.0 system
-//    #define SKIP_SAMPLE_WATER               1           // Skip pre-treatment sample water
+    #define SKIP_SAMPLE_WATER               1           // Skip pre-treatment sample water
     #define SKIP_CONSUMABLE_TESTS           1           // Skip pre-treatment consumable Self-tests
     #define SKIP_DRY_SELF_TESTS             1           // Skip pre-treatment dry self-tests
-//    #define SKIP_UI_INTERACTION             1           // Skip UI interaction.
+    #define SKIP_UI_INTERACTION             1           // Skip UI interaction.
     #define DISABLE_BATT_COMM               1           // Disable battery communication.
     #define SKIP_AIR_BUBBLE_CHECK           1           // Skip air bubble detector self-test.
     #define DISABLE_OCCLUSION_SELF_TEST     1           // Skip occlusion sensor self-test.
@@ -81,6 +81,7 @@
     #define ALLOW_1_MIN_TREATMENT_DURATION  1           // Allow user to change treatment duration to as low as 1 minute
     #define DISABLE_SYRINGE_PUMP_ALARMS     1           // Disable some syringe pump alarms that are triggering intermittently
     #define NO_PUMP_FLOW_LIMITS             1           // Allow any commanded flow rate for peristaltic pumps
+    #define DISABLE_BUBBLE_ALARMS           1           // Disable bubble alarms
 
     #include <stdio.h>
     #include <strings.h>