Index: firmware/App/HDCommon.h
===================================================================
diff -u -rf97d9e3fb36cd59f7f81cd1a77868d85e7ec52d5 -r3f814b53ea4cb2272f4e9af1ff34985e01fe8f45
--- firmware/App/HDCommon.h	(.../HDCommon.h)	(revision f97d9e3fb36cd59f7f81cd1a77868d85e7ec52d5)
+++ firmware/App/HDCommon.h	(.../HDCommon.h)	(revision 3f814b53ea4cb2272f4e9af1ff34985e01fe8f45)
@@ -46,7 +46,7 @@
 //    #define TST_3WAY_VALVES_ALWAYS_OPEN     1           // After POST and homing, open all 4 valves
 //    #define DISABLE_ACCELS                  1           // Disable accelerometer POST and monitoring
 //    #define DISABLE_CRC_ERROR               1           // Do not error on bad CRC for CAN messages
-//    #define DISABLE_ACK_ERRORS              1           // Do not error on failure of other node(s) to ACK a message
+    #define DISABLE_ACK_ERRORS              1           // Do not error on failure of other node(s) to ACK a message
     #define DISABLE_MOTOR_CURRENT_CHECKS    1           // Do not error on HD pump current checks
 //    #define DISABLE_PUMP_FLOW_CHECKS        1           // Do not error on HD pump flow checks
 //    #define DISABLE_PUMP_SPEED_CHECKS       1           // Do not error on HD pump speed checks
@@ -69,12 +69,12 @@
     #define DISABLE_OCCLUSION_SELF_TEST     1           // Skip occlusion sensor self-test.
 //    #define SKIP_CARTRIDGE_REMOVAL          1           // Skip cartridge removal check
 //    #define DISABLE_FPGA_COUNTER_CHECKS     1           // Disable alarms associated with FPGA read/error counters
-//    #define DISABLE_VOLTAGE_MONITOR         1           // Disable voltage monitoring/alarms
+    #define DISABLE_VOLTAGE_MONITOR         1           // Disable voltage monitoring/alarms
     #define ALLOW_1_MIN_TREATMENT_DURATION  1           // Allow user to change treatment duration to as low as 1 minute
     #define DISABLE_SYRINGE_PUMP_ALARMS     1           // Disable some syringe pump alarms that are triggering intermittently
 //    #define NO_PUMP_FLOW_LIMITS             1           // Allow any commanded flow rate for peristaltic pumps
     #define DISABLE_BUBBLE_ALARMS           1           // Disable bubble alarms
-//    #define DISABLE_UI_POST_TEST            1           // Disable the UI POST
+    #define DISABLE_UI_POST_TEST            1           // Disable the UI POST
 
     // Skip Pre-Treatment and get to treatment as soon as possible
 //    #define SKIP_UI_INTERACTION             1           // Skip UI interaction.