Index: firmware/App/HDCommon.h
===================================================================
diff -u -r29cb4f24819fd6590283fd5312bd373c6f0b7bd8 -r4591501b1d199a5eef6566269da90c17a12c5c66
--- firmware/App/HDCommon.h	(.../HDCommon.h)	(revision 29cb4f24819fd6590283fd5312bd373c6f0b7bd8)
+++ firmware/App/HDCommon.h	(.../HDCommon.h)	(revision 4591501b1d199a5eef6566269da90c17a12c5c66)
@@ -50,7 +50,7 @@
     #define DISABLE_PUMP_FLOW_CHECKS        1           // Do not error on HD pump flow checks
     #define DISABLE_PUMP_SPEED_CHECKS       1           // Do not error on HD pump speed checks
     #define DISABLE_PUMP_DIRECTION_CHECKS   1           // Do not error on HD pump direction checks
-    #define DISABLE_SYRINGE_PUMP            1           // Disable syringe pump functionality
+//    #define DISABLE_SYRINGE_PUMP            1           // Disable syringe pump functionality
     #define ALWAYS_ALLOW_SYRINGE_PUMP_CMDS  1           // Allow syringe pump commands at any time except when pump is busy
     #define DISABLE_PRESSURE_CHECKS         1           // Do not error on HD pressure checks
 //    #define DISABLE_UF_ALARMS               1           // Do not error on HD ultrafiltration checks
@@ -63,10 +63,10 @@
     #define ALARMS_DEBUG                    1           // Triggered alarms sent to debug UART
     #define ALARM_VOLUME_DEFAULT_LOW        1           // Set default alarm volume to lowest
 //    #define TEMP_UI_ALARM_SILENCE_FIX       1           // Temporary UI fix for handling alarm silence request msg
-    #define SKIP_PRIMING                    1           // Skip Pre-treatment Prime
+//    #define SKIP_PRIMING                    1           // Skip Pre-treatment Prime
     #define SKIP_WET_SELF_TESTS             1           // Skip Pre-treatment prime wet self-tests
 //    #define V1_5_SYSTEM                     1           // Build for v1.5 system
-    #define V2_0_SYSTEM                     1           // Build for v2.0 system
+//    #define V2_0_SYSTEM                     1           // Build for v2.0 system
 //    #define SKIP_SAMPLE_WATER               1           // Skip pre-treatment sample water
     #define SKIP_CONSUMABLE_TESTS           1           // Skip pre-treatment consumable Self-tests
     #define SKIP_DRY_SELF_TESTS             1           // Skip pre-treatment dry self-tests
@@ -77,8 +77,9 @@
 //    #define SKIP_CARTRIDGE_REMOVAL          1           // Skip cartridge removal check
     #define SKIP_EMPTY_RES_CHECK            1           // Skip reservoir empty check
     #define DISABLE_FPGA_COUNTER_CHECKS     1           // Disable alarms associated with FPGA read/error counters
+    #define DISABLE_VOLTAGE_MONITOR         1           // Disable voltage monitoring/alarms
+    #define ALLOW_1_MIN_TREATMENT_DURATION  1           // Allow user to change treatment duration to as low as 1 minute
 
-
     #include <stdio.h>
     #include <strings.h>
 #endif