Index: AlarmDefs.h =================================================================== diff -u -r84fb5ec30e84847447000f324846cb41fe69f3df -r0d2f7de2cf72d7dfd5ae911778b7dfc954f651ab --- AlarmDefs.h (.../AlarmDefs.h) (revision 84fb5ec30e84847447000f324846cb41fe69f3df) +++ AlarmDefs.h (.../AlarmDefs.h) (revision 0d2f7de2cf72d7dfd5ae911778b7dfc954f651ab) @@ -64,10 +64,10 @@ ALARM_ID_TD_VOLTAGE_OUT_OF_RANGE = 33, ///< TD voltage out of range fault ALARM_ID_TD_AC_POWER_LOST = 34, ///< TD AC power lost ALARM_ID_TD_AC_POWER_LOST_IN_TREATMENT = 35, ///< TD AC power lost during treatment - ALARM_ID_DD_CD1_SENSOR_FPGA_FAULT = 36, ///< DD CD1 conductivity sensor freshness/error timeout fault - ALARM_ID_DD_CD2_SENSOR_FPGA_FAULT = 37, ///< DD CD2 conductivity sensor freshness/error timeout fault - ALARM_ID_DD_CD3_SENSOR_FPGA_FAULT = 38, ///< DD CD3 conductivity sensor freshness/error timeout fault - ALARM_ID_DD_CD4_SENSOR_FPGA_FAULT = 39, ///< DD CD4 conductivity sensor freshness/error timeout fault + ALARM_ID_DD_D17_COND_SENSOR_FPGA_FAULT = 36, ///< DD CD1 conductivity sensor freshness/error timeout fault + ALARM_ID_DD_D27_COND_SENSOR_FPGA_FAULT = 37, ///< DD CD2 conductivity sensor freshness/error timeout fault + ALARM_ID_DD_D29_COND_SENSOR_FPGA_FAULT = 38, ///< DD CD3 conductivity sensor freshness/error timeout fault + ALARM_ID_DD_D43_COND_SENSOR_FPGA_FAULT = 39, ///< DD CD4 conductivity sensor freshness/error timeout fault ALARM_ID_TD_VENOUS_BUBBLE_DETECTED = 40, ///< TD venous bubble detected ALARM_ID_TD_CARTRIDGE_DOOR_OPENED = 41, ///< TD front door open ALARM_ID_TD_STUCK_BUTTON_TEST_FAILED = 42, ///< TD stuck button self test failure @@ -291,10 +291,10 @@ { ALARM_PRIORITY_HIGH, 10, TRUE , FALSE, TRUE , TRUE , TRUE , TRUE , TRUE , TRUE , FALSE, FALSE, TRUE , TRUE , FALSE, FALSE, ALARM_ID_TD_VENOUS_SENSOR_TIMEOUT_FAULT }, { ALARM_PRIORITY_LOW , 852, FALSE, FALSE, FALSE, FALSE, FALSE, FALSE, FALSE, FALSE, FALSE, FALSE, FALSE, FALSE, FALSE, FALSE, ALARM_ID_TD_AC_POWER_LOST }, { ALARM_PRIORITY_HIGH, 100, FALSE, FALSE, TRUE , FALSE, FALSE, TRUE , FALSE, FALSE, FALSE, FALSE, TRUE , TRUE , FALSE, TRUE , ALARM_ID_TD_AC_POWER_LOST_IN_TREATMENT }, - { ALARM_PRIORITY_HIGH, 110, FALSE, TRUE , TRUE , TRUE , FALSE, TRUE , FALSE, FALSE, FALSE, FALSE, FALSE, TRUE , FALSE, FALSE, ALARM_ID_DD_CD1_SENSOR_FPGA_FAULT }, - { ALARM_PRIORITY_HIGH, 110, FALSE, TRUE , TRUE , TRUE , FALSE, TRUE , FALSE, FALSE, FALSE, FALSE, FALSE, TRUE , FALSE, FALSE, ALARM_ID_DD_CD2_SENSOR_FPGA_FAULT }, - { ALARM_PRIORITY_HIGH, 110, FALSE, TRUE , TRUE , TRUE , FALSE, TRUE , FALSE, FALSE, FALSE, FALSE, FALSE, TRUE , FALSE, FALSE, ALARM_ID_DD_CD3_SENSOR_FPGA_FAULT }, - { ALARM_PRIORITY_HIGH, 110, FALSE, TRUE , TRUE , TRUE , FALSE, TRUE , FALSE, FALSE, FALSE, FALSE, FALSE, TRUE , FALSE, FALSE, ALARM_ID_DD_CD4_SENSOR_FPGA_FAULT }, + { ALARM_PRIORITY_HIGH, 110, FALSE, TRUE , TRUE , TRUE , FALSE, TRUE , FALSE, FALSE, FALSE, FALSE, FALSE, TRUE , FALSE, FALSE, ALARM_ID_DD_D17_COND_SENSOR_FPGA_FAULT }, + { ALARM_PRIORITY_HIGH, 110, FALSE, TRUE , TRUE , TRUE , FALSE, TRUE , FALSE, FALSE, FALSE, FALSE, FALSE, TRUE , FALSE, FALSE, ALARM_ID_DD_D27_COND_SENSOR_FPGA_FAULT }, + { ALARM_PRIORITY_HIGH, 110, FALSE, TRUE , TRUE , TRUE , FALSE, TRUE , FALSE, FALSE, FALSE, FALSE, FALSE, TRUE , FALSE, FALSE, ALARM_ID_DD_D29_COND_SENSOR_FPGA_FAULT }, + { ALARM_PRIORITY_HIGH, 110, FALSE, TRUE , TRUE , TRUE , FALSE, TRUE , FALSE, FALSE, FALSE, FALSE, FALSE, TRUE , FALSE, FALSE, ALARM_ID_DD_D43_COND_SENSOR_FPGA_FAULT }, { ALARM_PRIORITY_HIGH, 12, FALSE, FALSE, TRUE , TRUE , FALSE, TRUE , TRUE , FALSE, FALSE, TRUE , TRUE , TRUE , FALSE, TRUE , ALARM_ID_TD_VENOUS_BUBBLE_DETECTED, }, { ALARM_PRIORITY_HIGH, 210, FALSE, FALSE, TRUE , FALSE, FALSE, FALSE, FALSE, FALSE, FALSE, FALSE, TRUE , TRUE , FALSE, FALSE, ALARM_ID_TD_CARTRIDGE_DOOR_OPENED }, { ALARM_PRIORITY_HIGH, 1, TRUE , FALSE, TRUE , TRUE , TRUE , TRUE , TRUE , TRUE , FALSE, FALSE, TRUE , TRUE , FALSE, FALSE, ALARM_ID_TD_STUCK_BUTTON_TEST_FAILED }, @@ -396,10 +396,10 @@ { 110, ALARM_ID_DD_SPENT_DIALYSATE_PRES_TIMEOUT_FAULT }, { 110, ALARM_ID_DD_FRESH_DIALYSATE_PRES_TIMEOUT_FAULT }, { 110, ALARM_ID_DD_TRANSMEMB_PRES_TIMEOUT_FAULT }, - { 110, ALARM_ID_DD_CD1_SENSOR_FPGA_FAULT }, - { 110, ALARM_ID_DD_CD2_SENSOR_FPGA_FAULT }, - { 110, ALARM_ID_DD_CD3_SENSOR_FPGA_FAULT }, - { 110, ALARM_ID_DD_CD4_SENSOR_FPGA_FAULT }, + { 110, ALARM_ID_DD_D17_COND_SENSOR_FPGA_FAULT }, + { 110, ALARM_ID_DD_D27_COND_SENSOR_FPGA_FAULT }, + { 110, ALARM_ID_DD_D29_COND_SENSOR_FPGA_FAULT }, + { 110, ALARM_ID_DD_D43_COND_SENSOR_FPGA_FAULT }, { 110, ALARM_ID_RO_FPGA_COMM_TIMEOUT }, { 110, ALARM_ID_DD_D11_PUMP_SPEED_CONTROL_ERROR }, { 110, ALARM_ID_DD_D10_PUMP_SPEED_CONTROL_ERROR }, @@ -509,10 +509,10 @@ { 33 , ALARM_ID_TD_VOLTAGE_OUT_OF_RANGE , "TD | Service Required: Hemodialysis Device | A problem was detected with the hemodialysis device. \n- Treatment must be terminated.\n- Locate the ID code found in the bottom left corner\nof the alarm screen.\n- Call service to report the issue and schedule a repair. | TD Fault: Voltage Monitor | TD monitored voltage is out of range | If the TD monitored voltages are out of range for a certain period of time. | "}, { 34 , ALARM_ID_TD_AC_POWER_LOST , "TD | Power Loss | AC Power has been lost.\n- Check all electrical connections.\n- Press Resume/OK to return to welcome screen. | Loss of AC Power | TD AC power lost alarm | The TD Software shall trigger an alarm if an AC power loss is detected while the TD system is in standby, service, or treatment parameters mode. | "}, { 35 , ALARM_ID_TD_AC_POWER_LOST_IN_TREATMENT , "TD | Power Loss | Treatment must be terminated due to a power loss.\n- Follow clinic instructions on when to initiate manual rinseback.\n- Check all electrical connections.\n- If power returns within 5 minutes of outage, \n- rinseback will be allowed. | Blood Stop: Loss of AC Power | TD AC power lost alarm | The TD Software shall trigger an alarm if an AC power loss is detected while the TD system is in pre-treatment, treatment, or post-treatment mode. | "}, - { 36 , ALARM_ID_DD_CD1_SENSOR_FPGA_FAULT , "DD | Service Required: Dialysate Device | A problem was detected with the dialysate device.\n- Locate the ID code found in the bottom left corner\nof the alarm screen.\n- Call service to report the issue and schedule a repair. | DD Conductivity Sensor (CD1) Error | DD conductivity sensor located before balancing chamber reporting error or not being read successfully | Conductvity Sensor (CD1) is reporting an error or FPGA is failing to read sensor. | "}, - { 37 , ALARM_ID_DD_CD2_SENSOR_FPGA_FAULT , "DD | Service Required: Dialysate Device | A problem was detected with the dialysate device.\n- Locate the ID code found in the bottom left corner\nof the alarm screen.\n- Call service to report the issue and schedule a repair. | DD Conductivity Sensor (CD2) Error | DD conductivity sensor located after balancing chamber reporting error or not being read successfully | Conductvity Sensor (CD2) is reporting an error or FPGA is failing to read sensor. | "}, - { 38 , ALARM_ID_DD_CD3_SENSOR_FPGA_FAULT , "DD | Service Required: Dialysate Device | A problem was detected with the dialysate device.\n- Locate the ID code found in the bottom left corner\nof the alarm screen.\n- Call service to report the issue and schedule a repair. | DD Conductivity Sensor (CD3) Error | DD conductivity sensor located after balancing chamber reporting error or not being read successfully | Conductvity Sensor (CD3) is reporting an error or FPGA is failing to read sensor. | "}, - { 39 , ALARM_ID_DD_CD4_SENSOR_FPGA_FAULT , "DD | Service Required: Dialysate Device | A problem was detected with the dialysate device.\n- Locate the ID code found in the bottom left corner\nof the alarm screen.\n- Call service to report the issue and schedule a repair. | DD Conductivity Sensor (CD4) Error | DD conductivity sensor located in spent dialysate path reporting error or not being read successfully | Conductvity Sensor (CD4) is reporting an error or FPGA is failing to read sensor. | "}, + { 36 , ALARM_ID_DD_D17_COND_SENSOR_FPGA_FAULT , "DD | Service Required: Dialysate Device | A problem was detected with the dialysate device.\n- Locate the ID code found in the bottom left corner\nof the alarm screen.\n- Call service to report the issue and schedule a repair. | DD Conductivity Sensor (D17) Error | DD conductivity sensor located before balancing chamber reporting error or not being read successfully | Conductvity Sensor (D17) is reporting an error or FPGA is failing to read sensor. | "}, + { 37 , ALARM_ID_DD_D27_COND_SENSOR_FPGA_FAULT , "DD | Service Required: Dialysate Device | A problem was detected with the dialysate device.\n- Locate the ID code found in the bottom left corner\nof the alarm screen.\n- Call service to report the issue and schedule a repair. | DD Conductivity Sensor (D27) Error | DD conductivity sensor located after balancing chamber reporting error or not being read successfully | Conductvity Sensor (D27) is reporting an error or FPGA is failing to read sensor. | "}, + { 38 , ALARM_ID_DD_D29_COND_SENSOR_FPGA_FAULT , "DD | Service Required: Dialysate Device | A problem was detected with the dialysate device.\n- Locate the ID code found in the bottom left corner\nof the alarm screen.\n- Call service to report the issue and schedule a repair. | DD Conductivity Sensor (D29) Error | DD conductivity sensor located after balancing chamber reporting error or not being read successfully | Conductvity Sensor (D29) is reporting an error or FPGA is failing to read sensor. | "}, + { 39 , ALARM_ID_DD_D43_COND_SENSOR_FPGA_FAULT , "DD | Service Required: Dialysate Device | A problem was detected with the dialysate device.\n- Locate the ID code found in the bottom left corner\nof the alarm screen.\n- Call service to report the issue and schedule a repair. | DD Conductivity Sensor (D43) Error | DD conductivity sensor located in spent dialysate path reporting error or not being read successfully | Conductvity Sensor (D43) is reporting an error or FPGA is failing to read sensor. | "}, { 40 , ALARM_ID_TD_VENOUS_BUBBLE_DETECTED , "TD | Venous Air Detected | Air detected in the venous air trap.\n- Confirm arterial access placement and confirm\nconnections are secure.\n- Treatment must be terminated without rinseback. | Blood Stop: Venous Air Bubble | TD venous air bubble detected alarm | If bubbles are detected during the treatment. | "}, { 41 , ALARM_ID_TD_CARTRIDGE_DOOR_OPENED , "TD | Blood Pump Stopped: Door Open | The device door is open.\n Close the device door. \n- Press Resume/OK to continue. | Blood Stop: Door Open | TD cartridge door opened alarm | If the cartridge door is opened as reported by the FPGA. | "}, { 42 , ALARM_ID_TD_STUCK_BUTTON_TEST_FAILED , "TD | Stuck Button | A button was pressed during start up and appears stuck. \n- Press and release the power and stop buttons on the\nfront of the device.\n- Turn device off, then back on.\n- If problem continues, call service to schedule a repair. | TD POST: Stuck Button | TD Stuck button POST failure. Stop or Off button detected to be pressed for at least 1 second during test shortly after power up | Stop or Off button are pressed for more than 1 sec during POST. | "},