Index: tst_ui_logs/test.py
===================================================================
diff -u -rfc6048ad34dd26f056888083d1cc75ca748360cd -rf50eee251fa31d2efc8afe491b7a432f028cbcc4
--- tst_ui_logs/test.py	(.../test.py)	(revision fc6048ad34dd26f056888083d1cc75ca748360cd)
+++ tst_ui_logs/test.py	(.../test.py)	(revision f50eee251fa31d2efc8afe491b7a432f028cbcc4)
@@ -30,7 +30,7 @@
 import builtins
 from dialin.common.msg_ids import MsgIds
 from dialin.common import msg_defs
-from dialin.utils.conversions import byte_to_bytearray, integer_to_bytearray, float_to_bytearray, short_to_bytearray, unsigned_integer_to_bytearray
+from dialin.utils.conversions import byte_to_bytearray, integer_to_bytearray, float_to_bytearray, short_to_bytearray, unsigned_integer_to_bytearray, integer_to_bit_array
 # from dialin.utils import YES
 
 hd_simulator = HDSimulator()
@@ -311,7 +311,6 @@
     verify_log(msg_id=MsgIds.MSG_ID_HD_TREATMENT_STOP_TIMER_DATA.value, msg="Stop")
     
     #RTC
-    
     #0x0A00
     payload = unsigned_integer_to_bytearray(20)
     hd_simulator.cmd_send_hd_general_response(message_id=10, accepted=1, reason=1, is_pure_data=False, has_parameters=True, parameters_payload=payload)
@@ -530,7 +529,7 @@
     payload += integer_to_bytearray(1)
     dg_simulator.cmd_send_dg_general_response(message_id=161, accepted=0, reason=1, is_pure_data=False, has_parameters=True, parameters_payload=payload)
     verify_log(msg_id=MsgIds.MSG_ID_DG_SWITCHES_DATA.value, msg="~DG_Switches_Data")
-    
+  
     #0xA700
     #TODO: Payload values need to been changed after discussion
     payload = integer_to_bytearray(1)
@@ -539,9 +538,9 @@
     
     #0xAA00
     #TODO: Payload values need to been changed after discussion
-    payload = float_to_bytearray(10.0)
-    payload += float_to_bytearray(5.0)
-    payload += integer_to_bytearray(60)
+    payload = float_to_bytearray(88.6)
+    payload += float_to_bytearray(256.8)
+    payload += integer_to_bytearray(156)
     dg_simulator.cmd_send_dg_general_response(message_id=170, accepted=1, reason=1, is_pure_data=False, has_parameters=True, parameters_payload=payload)
     verify_log(msg_id=MsgIds.MSG_ID_DG_CONCENTRATE_MIXING_RATIOS_DATA.value, msg = None)
     
@@ -564,17 +563,28 @@
     #Fix id : ID not logged for the ones in ACK_NOT_REQUIRED list #46
     #0xAE00
     #TODO: Payload values need to been changed after discussion
-    dg_simulator.cmd_send_dg_general_response(message_id=174, accepted=0, reason=1)
+    payload = float_to_bytearray(22.2)
+    payload += float_to_bytearray(22.2)
+    payload += integer_to_bytearray(1)
+    payload += float_to_bytearray(22.2)
+    payload += float_to_bytearray(22.2)
+    payload += float_to_bytearray(22.2)
+    dg_simulator.cmd_send_dg_general_response(message_id=174, accepted=0, reason=1, is_pure_data = False,
+                                     has_parameters = True,
+                                     parameters_payload = payload)
     #verify_log(msg_id = MsgIds.MSG_ID_DG_FILL_MODE_DATA.value, msg = None)
     
+    
     #TODO: Msg_Ids need to be update as per patch file. line number 453 should be uncomment after the fix
     #Fix id : ID not logged for the ones in ACK_NOT_REQUIRED list #46
     #0xAF00
     #TODO: Payload values need to been changed after discussion
-    dg_simulator.cmd_send_dg_general_response(message_id=175, accepted=0, reason=1)
+    payload = unsigned_integer_to_bytearray(456)
+    dg_simulator.cmd_send_dg_general_response(message_id=175, accepted=0, reason=1, is_pure_data = False,
+                                     has_parameters = True,
+                                     parameters_payload = payload)
     #verify_log(msg_id = MsgIds.MSG_ID_DG_IDLE_MODE_BAD_FILL_SUB_STATES.value, msg = None)
     
-    #Alarm
     
     #0x0200
     hd_alarm.cmd_send_clear_alarms()
@@ -604,7 +614,8 @@
     
     #0x3200
     #TODO: Payload values need to been changed after discussion
-    hd_simulator.cmd_send_hd_general_response(message_id=50, accepted=0, reason=1)
+    payload = unsigned_integer_to_bytearray(6)
+    dg_simulator.cmd_send_dg_general_response(message_id=50, accepted=0, reason=1, is_pure_data= False, has_parameters = True, parameters_payload = payload)
     verify_log(msg_id = MsgIds.MSG_ID_USER_REQUEST_ALARM_SILENCE.value, msg = "AlarmSilence")
     
     #0x9800
@@ -771,20 +782,18 @@
     #0xA900
     hd_simulator.cmd_send_hd_general_response(message_id=169, accepted=0, reason=1, is_pure_data=False, has_parameters=True, parameters_payload=None)
     verify_log(msg_id=MsgIds.MSG_ID_HD_REQUEST_DG_CONCENTRATE_MIXING_RATIOS.value, msg="~DG_Mixing_Ratio_Fill_Prep_Request")
-    
+
     #FW Debug
     #0xF1FF
-    #TODO: Payload values need to been changed after discussion
-    payload = byte_to_bytearray(65)
+    payload = integer_to_bit_array(val = 65, num_bits = 42)
     hd_simulator.cmd_send_hd_general_response(message_id=65521, accepted=0, reason=1, is_pure_data=False, has_parameters=True, parameters_payload=payload)
     verify_log(msg_id=MsgIds.MSG_ID_HD_DEBUG_EVENT.value, msg="Debug")
     
     #0xF2FF
-    #TODO: Payload values need to been changed after discussion
-    payload = byte_to_bytearray(66)
+    payload = integer_to_bit_array(val = 65, num_bits = 42)
     dg_simulator.cmd_send_dg_general_response(message_id=65522, accepted=0, reason=1, is_pure_data=False, has_parameters=True, parameters_payload=payload)
     verify_log(msg_id=MsgIds.MSG_ID_DG_DEBUG_EVENT.value, msg="Debug")
-    
+
     #Initiate (Create/Select) a Treatment 
     #ID:0x3900
     hd_simulator.cmd_initiate_treatment_response(response = 1, reason = 0)
@@ -968,24 +977,44 @@
     dg_simulator.cmd_send_serial_dg_data(serial = 'AGHHG1234GHJABC')
     verify_log(msg_id = MsgIds.MSG_ID_DG_SERIAL_NUMBER.value, msg = "Serial", param = ['AGHHG1234GHJABC'])
     
-    #0x1F00 
-    hd_simulator.cmd_send_hd_general_response(message_id=31, accepted=1, reason=1, is_pure_data = False, has_parameters = True, parameters_payload = [255, 118, 215, 58])
+    #0x1F00
+    payload = float_to_bytearray(1.2)
+    payload += float_to_bytearray(1.2)
+    payload += float_to_bytearray(1.2)
+    payload += unsigned_integer_to_bytearray(2) 
+    dg_simulator.cmd_send_dg_general_response(message_id=31, accepted=1, reason=1, is_pure_data = False, has_parameters = True, parameters_payload = payload)
     verify_log(msg_id = MsgIds.MSG_ID_RO_PUMP_DATA.value)
     
     #0x2400
-    hd_simulator.cmd_send_hd_general_response(message_id=36, accepted=1, reason=1, is_pure_data = False, has_parameters = True, parameters_payload = [1,2,2])
+    payload = unsigned_integer_to_bytearray(1)
+    payload += unsigned_integer_to_bytearray(1)
+    payload += unsigned_integer_to_bytearray(1)
+    payload += unsigned_integer_to_bytearray(1)
+    dg_simulator.cmd_send_dg_general_response(message_id=36, accepted=1, reason=1, is_pure_data = False, has_parameters = True, parameters_payload = payload)
     verify_log(msg_id = MsgIds.MSG_ID_DRAIN_PUMP_DATA.value, msg = "DrainPump")
     
     #0x2700
-    hd_simulator.cmd_send_hd_general_response(message_id=39, accepted=1, reason=1, is_pure_data = False, has_parameters = True, parameters_payload = [2,2])
+    payload = unsigned_integer_to_bytearray(1)
+    payload += unsigned_integer_to_bytearray(1)
+    dg_simulator.cmd_send_dg_general_response(message_id=39, accepted=1, reason=1, is_pure_data = False, has_parameters = True, parameters_payload = payload)
     verify_log(msg_id = MsgIds.MSG_ID_DG_OP_MODE.value, msg = "OpMode")
     
     #0x2D00
-    hd_simulator.cmd_send_hd_general_response(message_id=45, accepted=1, reason=1, is_pure_data = False, has_parameters = True, parameters_payload = [1,2,3,4,5,6,7,8,9,10,11,12,13])
+    payload = float_to_bytearray(11.500)
+    payload += float_to_bytearray(11.500)
+    payload += float_to_bytearray(11.500)
+    payload += float_to_bytearray(11.500)
+    payload += float_to_bytearray(11.500)
+    payload += float_to_bytearray(11.500)
+    payload += float_to_bytearray(11.500)
+    payload += float_to_bytearray(11.500)
+    payload += float_to_bytearray(11.500)
+    payload += float_to_bytearray(11.500)
+    payload += float_to_bytearray(11.500)
+    payload += float_to_bytearray(11.500)
+    payload += float_to_bytearray(11.500)
+    dg_simulator.cmd_send_dg_general_response(message_id=45, accepted=1, reason=1, is_pure_data = False, has_parameters = True, parameters_payload = payload)
     verify_log(msg_id = MsgIds.MSG_ID_DG_TEMPERATURE_DATA.value, msg = "Temperatures")
 
     utils.tstDone()
-
-
     
-    
\ No newline at end of file