Index: scripts/globals.sh
===================================================================
diff -u -rd4988df80c5d03fe46e42c9563043ae281247278 -rb9654575709e02aecc01a01d246d7af578679387
--- scripts/globals.sh	(.../globals.sh)	(revision d4988df80c5d03fe46e42c9563043ae281247278)
+++ scripts/globals.sh	(.../globals.sh)	(revision b9654575709e02aecc01a01d246d7af578679387)
@@ -8,8 +8,8 @@
 #
 # @file    globals.sh
 #
-# @author  (last)      Vy
-# @date    (last)      20-May-2023
+# @author  (last)      Behrouz NematiPour
+# @date    (last)      15-Dec-2022
 # @author  (original)  Behrouz NematiPour
 # @date    (original)  15-Dec-2022
 #
@@ -68,11 +68,10 @@
 DST_PATH_SCRIPTS="/home/$DST_USER/scripts"
 DST_PATH_CLOUDSYNC="/home/$DST_USER/cloudsync"
 DST_PATH_FONTS="/usr/share/fonts/truetype"
-DST_PATH_BT_CONF="/etc/bluetooth/"
 
-POSTLOG=$HOME/post.log
-POSTERR=$HOME/post.err
-POSTOUT=$HOME/post.out
+POSTLOG=/tmp/post.log
+POSTERR=/tmp/post.err
+POSTOUT=/tmp/post.out
 POSTMSG_POSTFIX_PASSED=" passed"
 POSTMSG_POSTFIX_FAILED=" failed"
 POSTMSG_CANBUS="CANBus"
@@ -103,6 +102,11 @@
 DENALI_BIN=denali
 LAUNCH_SCR=run.sh
 
+SETUP_CONF_FILE="setup.conf"
+SETUP_ENABLE_MANUFACTURING_MODE="ManufacturingMode 1"
+
+APPLICATION_PARAMS="&"
+
 function confirm() {
   read -p "$1? [y,n]" -n 1 -r CONTINUE
   if [ "$CONTINUE" == "y" ]; then
@@ -114,7 +118,7 @@
   fi
 }
 
-string_trim() {
+function string_trim() {
     local var="$*"
     # remove leading whitespace characters
     var="${var#"${var%%[![:space:]]*}"}"
@@ -176,6 +180,10 @@
 }
 
 COUT="/dev/null"
+function setupConsoleout() {
+  # /dev/ttymxc1
+  COUT="/dev/$(echo $(dmesg | grep "printk: console") | sed 's/.*printk: console.*\(tty.*\)].*/\1/')"
+}
 
 function post_log_clear () { echo ""                 > $POSTLOG; }
 function post_err_clear () { echo ""                 > $POSTERR; }
@@ -198,3 +206,255 @@
   echo_dash_message "$1"
   echo_dash_comment
 }
+
+
+function setupResolved() {
+  echo nameserver 8.8.8.8        > /etc/resolv.conf
+  echo nameserver 192.168.10.20 >> /etc/resolv.conf # these need to be removed when/if the IoT WiFi doens't need them
+  echo nameserver 192.168.10.21 >> /etc/resolv.conf # these need to be removed when/if the IoT WiFi doens't need them
+  systemctl start systemd-resolved.service
+}
+
+function cleanupPOSTLogs() {
+  # cleanup the POST log file
+  post_log_clear
+  post_err_clear
+  post_out_clear
+
+  post_log_star                             " ***** "
+  post_log "Start: $(timestamp)"      # log the current date, time
+}
+
+function killApplication() {
+  # ---------------------------------------- STOP denali in case running (sys not rebooted)
+  killall $DENALI_BIN
+}
+
+function setupEthernet() {
+  #setting up ethernet----------------------- Ethernet
+  post_log_dash                             " Ethernet "
+  ieth=eth0
+  udhcpc --timeout=5 --retries=2 -n -i $ieth
+  post_log      "$(ip addr show $ieth)" # -details -statistics 
+}
+
+function setupCANBus() {
+  #setting up can interface ----------------- CANBus
+  post_log_dash                             " CANBus "
+  #current settings can be retrieved by the command below
+  #$ ip -details -statistics link show can0
+  ip link set can0 up type can bitrate 250000 restart-ms 100
+  ifconfig can0 txqueuelen 4000
+  candump can0 -T1 # check if candump can successfully use the port. will terminate in 1ms
+  if [ $? -eq 0 ]; then
+      post_log_pass "$POSTMSG_CANBUS$POSTMSG_POSTFIX_PASSED"
+      post_log      "$(ip link show can0)" # -details -statistics 
+  else
+      post_log_fail "$POSTMSG_CANBUS$POSTMSG_POSTFIX_FAILED"
+  fi
+}
+
+function setupSDCard() {
+  #mounting sdcard -------------------------- SD-CARD
+  post_log_dash                             " SD-CARD "
+  mkdir -p $SDCARD_MNT
+  mount $SDCARD_PRT $SDCARD_MNT
+  SDCTEST="$(mount | grep "$SDCARD_PRT on $SDCARD_MNT type $SDCARD_TYP_NAME (rw,")"
+  if ! [ -z "$SDCTEST" ]; then
+      SDINFO="$(df -h | grep -i $SDCARD_MNT)"
+      post_log_pass "$POSTMSG_SDCARD$POSTMSG_POSTFIX_PASSED"
+      post_log      "$SDCTEST"
+      post_log      "$SDINFO"
+  else
+      post_log_fail "$POSTMSG_SDCARD$POSTMSG_POSTFIX_FAILED"
+  fi
+}
+
+function testRTC() {
+  #test the RTC ----------------------------- RTC
+  post_log_dash                             " RTC"
+  #may not be an accurate test but sufficient for now
+  #and could not find a way to get the rtc clock with the higher resolusion
+  #it should not be confused with date command which is system date/time and not hwclock
+  hwclock -r # if there is any issue with rtc hwclock will show errors
+  if [ $? -eq 0 ]; then
+      RTC1=$($CMD_RTC_EPOCH)
+      sleep 1
+      RTC2=$($CMD_RTC_EPOCH)
+      if [ $(($RTC2 - $RTC1)) -eq 1 ]; then
+          post_log_pass "$POSTMSG_RTC$POSTMSG_POSTFIX_PASSED"
+      else
+          post_log_fail "$POSTMSG_RTC$POSTMSG_POSTFIX_FAILED"
+      fi
+  fi
+}
+
+function setupWiFi() {
+  # ----------------------------------------- WiFi
+  post_log_dash                             " WiFi "
+
+  # create the wpa supplicant folder for conf storing
+  iwlan=wlan0
+  WPA_SUPPLICANT_DIR="/etc/wpa_supplicant/"
+  WPA_SUPPLICANT_CNF="wpa_supplicant-$iwlan.conf"
+  mkdir -p $WPA_SUPPLICANT_DIR
+
+  # remove any software blocks
+  rfkill unblock wlan
+
+  if [[ ! -z $(dmesg | grep "wlan: driver loaded") ]]; then
+      post_log_pass "$POSTMSG_WIFI$POSTMSG_POSTFIX_PASSED [driver]"
+      post_log      "$(dmesg | grep -i wlan:)"
+
+      # start the wpa_supplicant service
+      post_log  "start wpa_supplicant service"
+      systemctl start wpa_supplicant@$iwlan.service
+      if [ $? -eq 0 ]; then
+          post_log_pass "$POSTMSG_WIFI$POSTMSG_POSTFIX_PASSED [service]"
+          # try to connect to WiFi
+          if [ -f $WPA_SUPPLICANT_DIR$WPA_SUPPLICANT_CNF ]; then
+              post_log_dash                             " WiFi Connection "
+              killall udhcpc
+              post_log  "connecting to WiFi"
+              # run this manually in terminal if didn't work on bootup
+              udhcpc --timeout=5 --retries=2 -n -i $iwlan
+          fi
+          post_log      "$(ip link show $iwlan)" # -details -statistics
+      else
+          post_log_fail "$POSTMSG_WIFI$POSTMSG_POSTFIX_FAILED"
+          post_log      "$(systemctl --failed | grep wpa)"
+      fi
+  else
+      post_log_fail "$POSTMSG_WIFI$POSTMSG_POSTFIX_FAILED"
+  fi
+}
+
+function setupBluetooth() {
+  # ----------------------------------------- Bluetooth
+  post_log_dash                             " Bluetooth "
+  /usr/share/silex-uart/silex-uart.sh stop  1>> $POSTOUT 2>> $POSTERR
+  sleep 1
+  /usr/share/silex-uart/silex-uart.sh start 1>> $POSTOUT 2>> $POSTERR
+  sleep 5
+  hciconfig hci0 up
+  if [ $? -eq 0 ]; then
+      post_log_pass "$POSTMSG_BLUETOOTH$POSTMSG_POSTFIX_PASSED"
+      post_log      "$(hciconfig hci0)"
+  else
+      post_log_fail "$POSTMSG_BLUETOOTH$POSTMSG_POSTFIX_FAILED"
+  fi
+}
+
+function testTouchscreen() {
+  #test the touch screen -------------------- Touch
+  post_log_dash                             " Touch "
+  # when successfully connected and can be loaded
+  #   Sitronix touch driver 2.10.2 Release date: 20180809
+  #   atmel_mxt_ts 3-004a: Direct firmware load for maxtouch.cfg failed with error -2
+  #   atmel_mxt_ts 3-004a: Touchscreen size X1279Y799
+  #   input: Atmel maXTouch Touchscreen as /devices/platform/soc@0/soc@0:bus@30800000/30a50000.i2c/i2c-3/3-004a/input/input2
+  # When NOT connected
+  #   Sitronix touch driver 2.10.2 Release date: 20180809
+  TSTEST="$(dmesg | grep "input: Atmel maXTouch Touchscreen as ")"
+  if [ "$?" -eq 0 ]; then
+      post_log_pass "$POSTMSG_TOUCH$POSTMSG_POSTFIX_PASSED"
+      post_log      "$TSTEST"
+  else
+      post_log_fail "$POSTMSG_TOUCH$POSTMSG_POSTFIX_FAILED"
+  fi
+}
+
+function testApplicationShasum() {
+  # ----------------------------------------- Sha256Sum
+  post_log_dash                             " Sha256Sum "
+  #check the denali applicatoin checksum
+  SHA_ACT=$(tail -c  83 $HOME/$DENALI_BIN |                      cut -c19-82)
+  SHA_EXP=$(head -c -83 $HOME/$DENALI_BIN | sha256sum -b --tag | cut -c14-77)
+  if [ "$SHA_ACT" == "$SHA_EXP" ]; then
+      post_log_pass "$POSTMSG_SHASUM$POSTMSG_POSTFIX_PASSED"
+  else
+      post_log_fail "$POSTMSG_SHASUM$POSTMSG_POSTFIX_FAILED"
+  fi
+}
+
+function testCloudSystem() {
+  # ----------------------------------------- CloudSystem
+  post_log_dash                             " CloudSystem "
+  post_log      "$(ip addr show $iwlan)" # -details -statistics
+  post_log      "$(ping www.diality.com -I $iwlan -c 3 -4)"
+}
+
+function startCloudSync() {
+  # ----------------------------------------- CloudSync
+  post_log_dash                             " CloudSync "
+  if [ -d $HOME/$CLOUDSYNC_FOLDER ]; then
+      # moving/ backing up the previous treatment logs so the new buff starts with fresh sequence
+      echo "Backing up CloudSync I/O buff"
+      CLOUDSYNC_PATH="$SDCARD_MNT"/"$CLOUDSYNC_FOLDER"
+      CLOUDSYNC_BACKUP="$CLOUDSYNC_PATH"_backup/$(timestamp)/
+      mkdir -p $CLOUDSYNC_BACKUP
+      mv $CLOUDSYNC_PATH/* $CLOUDSYNC_BACKUP          1>> $POSTOUT 2>> $POSTERR
+      rm $HOME/$CLOUDSYNC_FOLDER/data/*               1>> $POSTOUT 2>> $POSTERR
+      cd $HOME/$CLOUDSYNC_FOLDER/
+      python3 ./cs.py start &
+      sleep 2
+      CLOUDSYNC_STATUS="$(python3 ./cs.py status)"
+      if [ "$CLOUDSYNC_STATUS" == "$POSTMSG_CLOUDSYNC_RUNNING" ]; then
+          post_log_pass "$POSTMSG_CLOUDSYNC$POSTMSG_POSTFIX_PASSED"
+      else
+          post_log_fail "$POSTMSG_CLOUDSYNC$POSTMSG_POSTFIX_FAILED"
+      fi
+      post_log      "$CLOUDSYNC_STATUS"
+      cd
+  else
+      post_log_fail "$POSTMSG_CLOUDSYNC$POSTMSG_POSTFIX_FAILED"
+  fi
+}
+
+function startApplication() {
+  # ----------------------------------------- Denali
+  post_log_dash                             " Denali "
+  #launching denali application
+  DENALI_VERSION="$($HOME/$DENALI_BIN -v)"
+  if [[ -n "$DENALI_VERSION" ]]; then
+    post_log_pass "$($HOME/$DENALI_BIN -v)" # log UI Software version
+    if [[ "$APPLICATION_PARAMS" == *"-E"* ]]; then
+      $HOME/$DENALI_BIN $APPLICATION_PARAMS # do not enclose the APPLICATION_PARAMS in "", then it becomes an empty parameter to the denali which is not accepted.
+    else
+      $HOME/$DENALI_BIN $APPLICATION_PARAMS &
+    fi
+  else
+    post_log_fail "Unknown Applicaion Version"
+  fi
+}
+
+function timerStart() {
+  time_start=$(date +%s)
+}
+
+function timerEndLog() {
+  # ----------------------------------------- END
+  # tag the end time in the POST log file
+  post_log "End: $(timestamp)"
+  time_end=$(date +%s)
+  post_log "time spent: "$(( $time_end - $time_start ))" seconds"
+  post_log_star                             " ***** "
+}
+
+function applicationPOST() {
+  setupConsoleout
+  cleanupPOSTLogs  
+  setupCANBus
+  setupResolved
+  killApplication
+  setupEthernet
+  setupSDCard
+  testRTC
+  setupWiFi
+  setupBluetooth
+  testTouchscreen
+  testApplicationShasum
+  testCloudSystem
+  startCloudSync
+  startApplication
+}