// Project
#include "GuiController.h"
#include "format.h"
#include "VCalibrationSettings.h"

#include <QDateTime>

VIEW_DEF_CLASS_ADJUSTMENT(VCalibrationSettings)

void View::VCalibrationSettings::initConnections()
{
    _calibrationList.setRoleNames({
        { eRole_Title           , "title"       },
        { eRole_Component       , "component"   },
        { eRole_Payload         , "payload"     },
    });
}

QVariantList View::VCalibrationSettings::initList(const QStringList &vTitles)
{
    columnTitle ( vTitles ) ;

    QVariantList mInitValues;
    mInitValues.reserve(vTitles.count());

    for (int i = 0; i < vTitles.count(); ++i) {
        mInitValues.append(0.0);
    }

    rejectionReasons(mInitValues);

    return mInitValues;
}

quint32 View::VCalibrationSettings::getEpochUTC()
{
    const QDateTime currentDateTimeUTC = QDateTime::currentDateTime();
    return currentDateTimeUTC.toSecsSinceEpoch();
}

void View::VCalibrationSettings::refreshList (int vIndex)
{
    _columnTitle.clear();
    _calibrationList.clear();

    switch (vIndex) {
        case ePressure          :
        {
            QVariantList initPayloadValues = initList ( { tr("4th order"), tr("3rd order"), tr("2nd order"), tr("Gain"), tr("Offset"), tr("Cal Time") } ) ;
            // DD Pressure sensors
            _calibrationList.appendRow( {{ eRole_Title, tr("Hydraulics Outlet Pressure")},                      { eRole_Component, tr("D9" )},  {eRole_Payload, initPayloadValues   }});
            _calibrationList.appendRow( {{ eRole_Title, tr("Dry Bicarb Pressure")},                             { eRole_Component, tr("D66")},  {eRole_Payload, initPayloadValues   }});
            _calibrationList.appendRow( {{ eRole_Title, tr("Spent Dialysate Pressure")},                        { eRole_Component, tr("D51")},  {eRole_Payload, initPayloadValues   }});
            _calibrationList.appendRow( {{ eRole_Title, tr("Fresh Dialysate Pressure")},                        { eRole_Component, tr("D15")},  {eRole_Payload, initPayloadValues   }});
            _calibrationList.appendRow( {{ eRole_Title, tr("Transmembrane Pressure")},                          { eRole_Component, tr("D41")},  {eRole_Payload, initPayloadValues   }});
            _calibrationList.appendRow( {{ eRole_Title, tr("D87 Pressure Sensor")},                             { eRole_Component, tr("D87")},  {eRole_Payload, initPayloadValues   }});
            // FP Pressure sensors
            _calibrationList.appendRow( {{ eRole_Title, tr("Water inlet pressure before regulator")},           { eRole_Component, tr("M3") },  {eRole_Payload, initPayloadValues   }});
            _calibrationList.appendRow( {{ eRole_Title, tr("Water inlet pressure after regulator")},            { eRole_Component, tr("P8") },  {eRole_Payload, initPayloadValues   }});
            _calibrationList.appendRow( {{ eRole_Title, tr("Water inlet pressure before the cond. sensor")},    { eRole_Component, tr("P13")},  {eRole_Payload, initPayloadValues   }});
            _calibrationList.appendRow( {{ eRole_Title, tr("Pressure before the RO filter")},                   { eRole_Component, tr("P17")},  {eRole_Payload, initPayloadValues   }});
            _calibrationList.appendRow( {{ eRole_Title, tr("Pressure after the RO filter")},                    { eRole_Component, tr("P46")},  {eRole_Payload, initPayloadValues   }});
            break;
        }
        case eTemperature       :
        {
            QVariantList initPayloadValues = initList ( { tr("4th order"), tr("3rd order"), tr("2nd order"), tr("Gain"), tr("Offset"), tr("Cal Time") } ) ;
            _calibrationList.appendRow( {{ eRole_Title, tr("Heat exchanger Inlet")},        { eRole_Component, tr("D1" )},  {eRole_Payload, initPayloadValues   }});
            _calibrationList.appendRow( {{ eRole_Title, tr("Heat exchanger Outlet")},       { eRole_Component, tr("D78")},  {eRole_Payload, initPayloadValues   }});
            _calibrationList.appendRow( {{ eRole_Title, tr("Hydraulics Primary Heater")},   { eRole_Component, tr("D4" )},  {eRole_Payload, initPayloadValues   }});
            _calibrationList.appendRow( {{ eRole_Title, tr("Trimmer Heater")},              { eRole_Component, tr("D50")},  {eRole_Payload, initPayloadValues   }});
            _calibrationList.appendRow( {{ eRole_Title, tr("Conductivity")},                { eRole_Component, tr("D99")},  {eRole_Payload, initPayloadValues   }});
            _calibrationList.appendRow( {{ eRole_Title, tr("Barometric")},                  { eRole_Component, tr("BRD")},  {eRole_Payload, initPayloadValues   }});
            break;
        }
        case eConcentratePump   :
        {
            QVariantList initPayloadValues = initList ( { tr("4th order"), tr("3rd order"), tr("2nd order"), tr("Gain"), tr("Offset"), tr("Cal Time") } ) ;
            _calibrationList.appendRow( {{ eRole_Title, tr("Acid")},                { eRole_Component, tr("D11_CP1" )}, {eRole_Payload, initPayloadValues   }});
            _calibrationList.appendRow( {{ eRole_Title, tr("Bicarbonate")},         { eRole_Component, tr("D10_CP2" )}, {eRole_Payload, initPayloadValues   }});
            _calibrationList.appendRow( {{ eRole_Title, tr("Ultrafiltration")},     { eRole_Component, tr("D76"     )}, {eRole_Payload, initPayloadValues   }});
            break;
        }
        case eDialysatePumpD12   :
        {
            QVariantList initPayloadValues = initList  ( { tr("Target Speed"), tr("Cal Time") } ) ;
            _calibrationList.appendRow( {{ eRole_Title, tr("Fresh Dialysate Pump")},    { eRole_Component, tr("D12"     )}, {eRole_Payload, initPayloadValues   }});
            break;
        }
        case eDialysatePumpD48  :
        {
            QVariantList initPayloadValues = initList  ( { tr("4th order"), tr("3rd order"), tr("2nd order"), tr("Gain"), tr("Offset"), tr("Cal Time") } ) ;
            _calibrationList.appendRow( {{ eRole_Title, tr("Spent Dialysate Pump")},    { eRole_Component, tr("D48"     )}, {eRole_Payload, initPayloadValues   }});
            break;
        }
        case eAcidTypes         :
        {
            QVariantList initPayloadValues = initList  ( { tr("Mix Ratio"), tr("Full Bottle Vol. (mL)"), tr("Cond. (uS/cm)"), tr("Temp (°C)"), tr("Cal Time") } ) ;
            _calibrationList.appendRow( {{ eRole_Title, tr("08-1251-1")},    { eRole_Component, tr("")}, {eRole_Payload, initPayloadValues   }});
            _calibrationList.appendRow( {{ eRole_Title, tr("08-2251-0")},    { eRole_Component, tr("")}, {eRole_Payload, initPayloadValues   }});
            _calibrationList.appendRow( {{ eRole_Title, tr("08-3251-9")},    { eRole_Component, tr("")}, {eRole_Payload, initPayloadValues   }});
            break;
        }
        case eBicarbTypes       :
        {
            QVariantList initPayloadValues = initList  ( { tr("Mix Ratio"), tr("Start Volume (mL)"), tr("Cond. (uS/cm)"), tr("Temp (°C)"), tr("Cal Time") } ) ;
            _calibrationList.appendRow( {{ eRole_Title, tr("08-677753-0")},    { eRole_Component, tr("")}, {eRole_Payload, initPayloadValues   }});
            break;
        }
        case eAccelerometer     :
        {
            QVariantList initPayloadValues = initList  ( { tr("X axis offset"), tr("Y axis offset"), tr("Z axis offset"), tr("Cal Time") } ) ;
            _calibrationList.appendRow( {{ eRole_Title, tr("Accelerometer")},    { eRole_Component, tr("")}, {eRole_Payload, initPayloadValues   }});
            break;
        }
        case eBloodLeak         :
        {
            QVariantList initPayloadValues = initList  ( { tr("Set Point"), tr("Cal Time") } ) ;
            _calibrationList.appendRow( {{ eRole_Title, tr("Blood Leak")},    { eRole_Component, tr("")}, {eRole_Payload, initPayloadValues   }});
            break;
        }
    }
}

void View::VCalibrationSettings::doAdjustment(int vIndex, int vSensorIndex, QVariantList vPayload)
{
    // to test rejeciton reason - works -- REMOIVE later
//    static int test = 0;
//    rejectionReasons ({0,0,0,0,test = ! test,0});

    quint32 calTime = getEpochUTC();

    // set cal time to payload.
    if ( ! vPayload.isEmpty())
    {
        vPayload.last() =  Format::fromEpoch( calTime,  "yyyy/MM/dd, HH:mm"  );
    }
    _calibrationList.updateData(vSensorIndex, eRole_Payload,  vPayload);

    qDebug() << "Cal Time: " << vPayload.last() << " -- Epoch:" << calTime;

    switch (vIndex) {
    case ePressure          :
        break;
    case eTemperature       :
        break;
    case eConcentratePump   :
        break;
    case eDialysatePumpD12   :
        break;
    case eDialysatePumpD48  :
        break;
    case eAcidTypes         :
        break;
    case eBicarbTypes       :
        break;
    case eAccelerometer     :
        break;
    case eBloodLeak         :
        break;
    }
}