/*!
 *
 * Copyright (c) 2019-2020 Diality Inc. - All Rights Reserved.
 * \copyright
 *          THIS CODE MAY NOT BE COPIED OR REPRODUCED IN ANY FORM, IN PART OR IN
 *          WHOLE, WITHOUT THE EXPLICIT PERMISSION OF THE COPYRIGHT OWNER.
 *
 * \file    MAlarmStatusData.cpp
 * \author  (last)      Behrouz NematiPour
 * \date    (last)      16-Oct-2020
 * \author  (original)  Behrouz NematiPour
 * \date    (original)  02-Dec-2020
 *
 */
#include "MAlarmStatusData.h"
// #include <QDebug>

using namespace Model;
using namespace Gui;

QVariantList MAlarmStatus::parameters() const {
    return {
        _data.mState       .value       ,
        _data.mTop         .value       ,
        _data.mEscalatesIn .value       ,
        _data.mMuteTimeout .value       ,
        _data.mFlags       .toString("")
    };
}

bool MAlarmStatus::fromByteArray(const QByteArray &vByteArray, int *vIndex) {
    int index = 0; // message data start position
    if (GetValue(vByteArray, index, _data.mState       ))
    if (GetValue(vByteArray, index, _data.mTop         ))
    if (GetValue(vByteArray, index, _data.mEscalatesIn ))
    if (GetValue(vByteArray, index, _data.mMuteTimeout ))
    if (GetBits (vByteArray, index, _data.mFlags       , eFlag_Bits_Length)) {
        qDebug() << _data.mFlags.toString();
        return true ;
    }
    else { if(vIndex) *vIndex = index; return false; }
    else { if(vIndex) *vIndex = index; return false; }
    else { if(vIndex) *vIndex = index; return false; }
    else { if(vIndex) *vIndex = index; return false; }
    else { if(vIndex) *vIndex = index; return false; }
}

/*!
 * \brief   MAlarmStatus::data
 * \details Provides model's Data from the received messages data values
 * \return  Data
 */
MAlarmStatus::Data MAlarmStatus::data() const {
    Data data;
    data.mState       = _data.mState       .value;
    data.mTop         = _data.mTop         .value;
    data.mEscalatesIn = _data.mEscalatesIn .value;
    data.mMuteTimeout = _data.mMuteTimeout .value;
    data.mFlags       = _data.mFlags             ;
    return data;
}

/*!
 * \brief   MAlarmStatus::toText
 * \details Looks up the alarm description using the alarm enum
 * \param   vAlarmID - Alarm Id
 * \return  The alarm description
 */
QString MAlarmStatus::toText(GuiAlarmID vAlarmID) {
    QString result;
    switch (vAlarmID) {
    case GuiAlarmID::ALARM_ID_NO_ALARM                               : { result = QObject::tr(""                                                                                                                    ); break; }
    case GuiAlarmID::ALARM_ID_HD_SOFTWARE_FAULT                      : { result = QObject::tr("Software Error."                                                                                                     ); break; }
    case GuiAlarmID::ALARM_ID_STUCK_BUTTON_TEST_FAILED               : { result = QObject::tr("Indication for when no alarms is a possible situation."                                                              ); break; }
    case GuiAlarmID::ALARM_ID_FPGA_POST_TEST_FAILED                  : { result = QObject::tr("FPGA POST failure."                                                                                                  ); break; }
    case GuiAlarmID::ALARM_ID_WATCHDOG_POST_TEST_FAILED              : { result = QObject::tr("Watchdog POST failure."                                                                                              ); break; }
    case GuiAlarmID::ALARM_ID_UI_COMM_POST_FAILED                    : { result = QObject::tr("UI communication POST failure."                                                                                      ); break; }
    case GuiAlarmID::ALARM_ID_BLOOD_PUMP_MC_CURRENT_CHECK            : { result = QObject::tr("Blood pump failed motor controller current check."                                                                   ); break; }
    case GuiAlarmID::ALARM_ID_BLOOD_PUMP_OFF_CHECK                   : { result = QObject::tr("Blood pump failed motor off check. \nMeasured speed while commanded off."                                            ); break; }
    case GuiAlarmID::ALARM_ID_BLOOD_PUMP_MC_DIRECTION_CHECK          : { result = QObject::tr("Blood pump failed motor controller direction check."                                                                 ); break; }
    case GuiAlarmID::ALARM_ID_BLOOD_PUMP_ROTOR_SPEED_CHECK           : { result = QObject::tr("Blood pump failed rotor speed check."                                                                                ); break; }
    case GuiAlarmID::ALARM_ID_DIAL_IN_PUMP_MC_CURRENT_CHECK          : { result = QObject::tr("Dialysis inlet pump failed motor controller current check."                                                          ); break; }
    case GuiAlarmID::ALARM_ID_DIAL_IN_PUMP_OFF_CHECK                 : { result = QObject::tr("Dialysis inlet pump failed motor off check. \nMeasured speed while commanded off."                                   ); break; }
    case GuiAlarmID::ALARM_ID_DIAL_IN_PUMP_MC_DIRECTION_CHECK        : { result = QObject::tr("Dialysis inlet pump failed motor controller direction check."                                                        ); break; }
    case GuiAlarmID::ALARM_ID_DIAL_IN_PUMP_ROTOR_SPEED_CHECK         : { result = QObject::tr("Dialysis inlet pump failed rotor speed check."                                                                       ); break; }
    case GuiAlarmID::ALARM_ID_DIAL_OUT_PUMP_MC_CURRENT_CHECK         : { result = QObject::tr("Dialysis outlet pump failed motor controller current check."                                                         ); break; }
    case GuiAlarmID::ALARM_ID_DIAL_OUT_PUMP_OFF_CHECK                : { result = QObject::tr("Dialysis outlet pump failed motor off check. \nMeasured speed while commanded off."                                  ); break; }
    case GuiAlarmID::ALARM_ID_DIAL_OUT_PUMP_MC_DIRECTION_CHECK       : { result = QObject::tr("Dialysis outlet pump failed motor controller direction check."                                                       ); break; }
    case GuiAlarmID::ALARM_ID_DIAL_OUT_PUMP_ROTOR_SPEED_CHECK        : { result = QObject::tr("Dialysis outlet pump failed rotor speed check."                                                                      ); break; }
    case GuiAlarmID::ALARM_ID_WATCHDOG_EXPIRED                       : { result = QObject::tr("Watchdog expired error."                                                                                             ); break; }
    case GuiAlarmID::ALARM_ID_RTC_COMM_ERROR                         : { result = QObject::tr("Real-time clock communication error."                                                                                ); break; }
    case GuiAlarmID::ALARM_ID_RTC_CONFIG_ERROR                       : { result = QObject::tr("Real-time clock configuration error."                                                                                ); break; }
    case GuiAlarmID::ALARM_ID_DG_COMM_TIMEOUT                        : { result = QObject::tr("Dialysate generator communication timeout."                                                                          ); break; }
    case GuiAlarmID::ALARM_ID_UI_COMM_TIMEOUT                        : { result = QObject::tr("User interface communication timeout."                                                                               ); break; }
    case GuiAlarmID::ALARM_ID_COMM_TOO_MANY_BAD_CRCS                 : { result = QObject::tr("Too many bad CRCs detected on received system messages."                                                             ); break; }
    case GuiAlarmID::ALARM_ID_TREATMENT_STOPPED_BY_USER              : { result = QObject::tr("Treatment stopped by user action - pressed stop button."                                                             ); break; }
    case GuiAlarmID::ALARM_ID_BLOOD_SITTING_WARNING                  : { result = QObject::tr("Blood sitting too long warning (>4 min)."                                                                            ); break; }
    case GuiAlarmID::ALARM_ID_BLOOD_SITTING_TOO_LONG_NO_RESUME       : { result = QObject::tr("Blood sitting too long alarm (>5 min)."                                                                              ); break; }
    case GuiAlarmID::ALARM_ID_BLOOD_SITTING_TOO_LONG_NO_RINSEBACK    : { result = QObject::tr("Blood sitting too long alarm (>10 min)."                                                                             ); break; }
    case GuiAlarmID::ALARM_ID_CAN_MESSAGE_NOT_ACKED                  : { result = QObject::tr("System message needing acknowledgment was not acknowledged."                                                         ); break; }
    case GuiAlarmID::ALARM_ID_OCCLUSION_BLOOD_PUMP                   : { result = QObject::tr("Blood pump occlusion detected."                                                                                      ); break; }
    case GuiAlarmID::ALARM_ID_OCCLUSION_DIAL_IN_PUMP                 : { result = QObject::tr("Dialysate inlet pump occlusion detected."                                                                            ); break; }
    case GuiAlarmID::ALARM_ID_OCCLUSION_DIAL_OUT_PUMP                : { result = QObject::tr("Dialysate outlet pump occlusion detected."                                                                           ); break; }
    case GuiAlarmID::ALARM_ID_ARTERIAL_PRESSURE_LOW                  : { result = QObject::tr("Arterial pressure too low during treatment."                                                                         ); break; }
    case GuiAlarmID::ALARM_ID_ARTERIAL_PRESSURE_HIGH                 : { result = QObject::tr("Arterial pressure too high during treatment."                                                                        ); break; }
    case GuiAlarmID::ALARM_ID_VENOUS_PRESSURE_LOW                    : { result = QObject::tr("Venous pressure too low during treatment."                                                                           ); break; }
    case GuiAlarmID::ALARM_ID_VENOUS_PRESSURE_HIGH                   : { result = QObject::tr("Venous pressure too high during treatment."                                                                          ); break; }
    case GuiAlarmID::ALARM_ID_UF_RATE_TOO_HIGH_ERROR                 : { result = QObject::tr("Ultrafiltration rate is too high error during treatment."                                                            ); break; }
    case GuiAlarmID::ALARM_ID_UF_VOLUME_ACCURACY_ERROR               : { result = QObject::tr("Ultrafiltration volume accuracy error during treatment."                                                             ); break; }
    case GuiAlarmID::ALARM_ID_RTC_BATTERY_LOW                        : { result = QObject::tr("RTC battery low."                                                                                                    ); break; }
    case GuiAlarmID::ALARM_ID_RTC_OR_TIMER_ACCURACY_FAILURE          : { result = QObject::tr("RTC or MCU timer inaccurate."                                                                                        ); break; }
    case GuiAlarmID::ALARM_ID_RTC_RAM_OPS_ERROR                      : { result = QObject::tr("RTC or RAM operations failure (read or write)."                                                                      ); break; }
    case GuiAlarmID::ALARM_ID_NVDATA_EEPROM_OPS_FAILURE              : { result = QObject::tr("EEPRON operations (read, write,  erase) failure."                                                                    ); break; }
    case GuiAlarmID::ALARM_ID_NVDATA_MFG_RECORD_CRC_ERROR            : { result = QObject::tr("Manufacturing record CRC failure."                                                                                   ); break; }
    case GuiAlarmID::ALARM_ID_NVDATA_SRVC_RECORD_CRC_ERROR           : { result = QObject::tr("Service record CRC failure."                                                                                         ); break; }
    case GuiAlarmID::ALARM_ID_NVDATA_CAL_RECORD_CRC_ERROR            : { result = QObject::tr("Calibration record CRC failure."                                                                                     ); break; }
    case GuiAlarmID::ALARM_ID_NVDATA_HW_USAGE_DATA_CRC_ERROR         : { result = QObject::tr("HW usage data failure."                                                                                              ); break; }
    case GuiAlarmID::AlARM_ID_NVDATA_DISINFECTION_DATE_CRC_ERROR     : { result = QObject::tr("Last disinfection date CRC error."                                                                                   ); break; }
    case GuiAlarmID::ALARM_ID_RO_PUMP_OUT_PRESSURE_OUT_OF_RANGE      : { result = QObject::tr("Pressure at outlet of RO pump is out of range."                                                                      ); break; }
    case GuiAlarmID::ALARM_ID_TEMPERATURE_SENSORS_FAULT              : { result = QObject::tr("DG temperature sensors fault."                                                                                       ); break; }
    case GuiAlarmID::ALARM_ID_HD_COMM_TIMEOUT                        : { result = QObject::tr("HD communication timeout."                                                                                           ); break; }
    case GuiAlarmID::ALARM_ID_VALVE_CONTROL_FAILURE                  : { result = QObject::tr("FPGA not accepting commanded valve states."                                                                          ); break; }
    case GuiAlarmID::ALARM_ID_BLOOD_PUMP_FLOW_VS_MOTOR_SPEED_CHECK   : { result = QObject::tr("Blood pump failed flow vs. motor speed check. \nMismatch with flow rate and rate implied by motor speed."            ); break; }
    case GuiAlarmID::ALARM_ID_DIAL_IN_PUMP_FLOW_VS_MOTOR_SPEED_CHECK : { result = QObject::tr("Dialysate inlet pump failed flow vs. motor speed check. \nMismatch with flow rate and rate implied by motor speed."  ); break; }
    case GuiAlarmID::ALARM_ID_DIAL_OUT_PUMP_FLOW_VS_MOTOR_SPEED_CHECK: { result = QObject::tr("Dialysate outlet pump failed flow vs. motor speed check. \nMismatch with flow rate and rate implied by motor speed." ); break; }
    case GuiAlarmID::ALARM_ID_BLOOD_PUMP_MOTOR_SPEED_CHECK           : { result = QObject::tr("Blood pump failed motor speed check.  Measured vs. commanded."                                                       ); break; }
    case GuiAlarmID::ALARM_ID_DIAL_IN_PUMP_MOTOR_SPEED_CHECK         : { result = QObject::tr("Dialysate inlet pump failed motor speed check.  Measured vs. commanded."                                             ); break; }
    case GuiAlarmID::ALARM_ID_DIAL_OUT_PUMP_MOTOR_SPEED_CHECK        : { result = QObject::tr("Dialysate outlet pump failed motor speed check.  Measured vs. commanded."                                            ); break; }
    case GuiAlarmID::ALARM_ID_BLOOD_PUMP_ROTOR_SPEED_TOO_HIGH        : { result = QObject::tr("Blood pump rotor speed too high."                                                                                    ); break; }
    case GuiAlarmID::ALARM_ID_INLET_WATER_LOW_CONDUCTIVITY           : { result = QObject::tr("Inlet water conductivity too low."                                                                                   ); break; }
    default:
        result = QObject::tr("ALARM_ID_UNDEFINED [%1]").arg(int(vAlarmID));
        break;
    }
    return result;
}