###########################################################################
#
# Copyright (c) 2019-2021 Diality Inc. - All Rights Reserved.
#
# THIS CODE MAY NOT BE COPIED OR REPRODUCED IN ANY FORM, IN PART OR IN
# WHOLE, WITHOUT THE EXPLICIT PERMISSION OF THE COPYRIGHT OWNER.
#
# @file    strings.py
#
# @author  (last)      LTTS
# @date    (last)      18-Jan-2022
#
############################################################################


BLOOD_PRIMING_TEXT = "Blood Priming"
SALINE_UNIT = "mL"
BLOOD_PRIMING_UNIT = "mL"
BLOOD_PRIMING_VALUE_0 = "0"
BLOOD_PRIMING_DEFAULT_VALUE = BLOOD_PRIMING_VALUE_0 + " " + BLOOD_PRIMING_UNIT

#main-treatment heparin 
HEPARIN_UNIT = "mL"
HEPARIN_DELIVERY_TEXT = "HEPARIN DELIVERY"
HEPARIN_DELIVERY_OFF_TEXT = "OFF"
HEPARIN_STOP_TEXT = "Delivery Stopped"
HEPARIN_RESUME_DELIVERY_TEXT = "RESUME DELIVERY"
HEPARIN_BOLUS_ACTIVE_TEXT = "Bolus Active" 
HEPARIN_BOLUS_DISPENSING_TEXT = "Dispensing Active"
HEPARIN_PAUSE_DELIVERY_TEXT = "PAUSE DELIVERY"
HEPARIN_MAXIMUM_VOLUME_DELIVERED_TEXT = "Maximum Cumulative Heparin Volume Delivered"
HEPARIN_SYRINGE_EMPTY_TEXT = "Syringe Empty"
VOLUME_DELIVERED_TEXT = "Volume Delivered"
TREATMENT_TEXT = "Treatment"
TRENDING_TEXT = "Trending"
SETTINGS_TEXT = "Settings"
# dictionary of rejection reason from application source code.
# message location -> denali-> Headers-> common-> MsgDefs.h
REJECTION_REASON = {
    0: "No Active Alarm List",                                   
    1: "REQUEST_REJECT_REASON_NOT_ALLOWED_IN_CURRENT_MODE",              # Request is not allowed in the current operating mode
    2: "REQUEST_REJECT_REASON_TIMEOUT_WAITING_FOR_USER_CONFIRM",         # Validated request was not confirmed by user in reasonable time
    3: "REQUEST_REJECT_REASON_NOT_IN_TREATMENT_MODE",                    # Request is not allowed if not in treatment mode
    4: "REQUEST_REJECT_REASON_INVALID_TREATMENT_STATE",                  # Request is not allowed in current treatment state
    5: "REQUEST_REJECT_REASON_TREATMENT_TOO_CLOSE_TO_FINISHED",          # Request is not allowed so near end of treatment
    6: "REQUEST_REJECT_REASON_TREATMENT_TIME_OUT_OF_RANGE",              # Treatment duration is out of range
    7: "REQUEST_REJECT_REASON_TREATMENT_TIME_LESS_THAN_CURRENT",         # Treatment time change is less than currently elapsed treatment time
    8: "REQUEST_REJECT_REASON_BLOOD_FLOW_OUT_OF_RANGE",                  # Blood flow is out of range
    9: "REQUEST_REJECT_REASON_DIAL_FLOW_OUT_OF_RANGE",                   # Dialysate flow is out of range
    10: "REQUEST_REJECT_REASON_DIAL_VOLUME_OUT_OF_RANGE",                # Dialysate flow rate or treatment duration causes dialysate volume to exceed limit
    11: "REQUEST_REJECT_REASON_UF_VOLUME_OUT_OF_RANGE",                  # Ultrafiltration volume is out of range
    12: "REQUEST_REJECT_REASON_UF_RATE_OUT_OF_RANGE",                    # Ultrafiltration rate is out of range
    13: "REQUEST_REJECT_REASON_TREATMENT_TIME_LESS_THAN_MINIMUM",        # Treatment time change is less than minimum treatment time
    14: "REQUEST_REJECT_REASON_UF_NOT_IN_PROGESS",                       # Ultrafiltration is not currently in progress
    15: "REQUEST_REJECT_REASON_UF_NOT_PAUSED",                           # Ultrafiltration is not currently paused
    16: "REQUEST_REJECT_REASON_SALINE_BOLUS_IN_PROGRESS",                # A saline bolus is in progress
    17: "REQUEST_REJECT_REASON_PARAM_OUT_OF_RANGE",                      # A treatment parameter is out of range
    18: "REQUEST_REJECT_REASON_HEPARIN_PRESTOP_EXCEEDS_DURATION",        # The Heparin pre-stop setting is greater than the treatment duration
    19: "REQUEST_REJECT_REASON_ARTERIAL_PRESSURE_LOW_VS_HIGH",           # Arterial pressure low and high alarm limits are not inconsistent
    20: "REQUEST_REJECT_REASON_VENOUS_PRESSURE_LOW_VS_HIGH",             # Venous pressure low and high alarm limits are inconsistent
    21: "REQUEST_REJECT_REASON_SALINE_MAX_VOLUME_REACHED",               # Saline bolus volume maximum has been reached - no more saline allowed
    22: "REQUEST_REJECT_REASON_SALINE_BOLUS_NOT_IN_PROGRESS",            # A saline bolus is not in progress
    23: "REQUEST_REJECT_REASON_ACTION_DISABLED_IN_CURRENT_STATE",        # Requested user action is disabled in current state
    24: "REQUEST_REJECT_REASON_ALARM_IS_ACTIVE",                         # Requested user action not allowed while alarm is active
    25: "REQUEST_REJECT_REASON_INVALID_COMMAND",                         # Requested user action invalid
    26: "REQUEST_REJECT_REASON_TREATMENT_IS_COMPLETED",                  # The treatment has been completed
    27: "REQUEST_REJECT_REASON_ADDL_RINSEBACK_MAX_VOLUME_REACHED",       # Rinseback additional volume maximum has been reached - no more additional rinsebacks allowed
    28: "REQUEST_REJECT_REASON_UF_VOLUME_NOT_SET",                       # Ultrafiltration volume is not set yet
    29: "REQUEST_REJECT_REASON_NO_PATIENT_CONNECTION_CONFIRM",           # The user has not confirmed patient connection
    30: "REQUEST_REJECT_REASON_HEPARIN_PAUSE_INVALID_IN_THIS_STATE",     # Heparin cannot be paused if not currently deliverying Heparin
    31: "REQUEST_REJECT_REASON_HEPARIN_NOT_PAUSED",                      # Heparin cannot be resumed if not paused
    32: "REQUEST_REJECT_REASON_DG_COMM_LOST",                            # Treatment cannot initiate if DG comm is lost
    33: "REQUEST_REJECT_REASON_DRAIN_NOT_COMPLETE",                      # Post-treatment reservoirs drain not complete
    34: "REQUEST_REJECT_REASON_DG_NOT_IN_STANDBY_IDLE_STATE",            # Treatment cannot initiate if DG is not in standby idle state
    35: "REQUEST_REJECT_REASON_INVALID_REQUEST_FORMAT",                  # Request message not formatted properly
    36: "REQUEST_REJECT_REASON_INVALID_DATE_OR_TIME",                    # Given date/time is invalid
    37: "REQUEST_REJECT_REASON_TREATMENT_IN_PROGRESS",                   # Treatment is in progress
    38: "REQUEST_REJECT_REASON_BATTERY_IS_NOT_CHARGED",                  # Battery does not have enough charge to start treatment
    39: "REQUEST_REJECT_REASON_RINSEBACK_NOT_COMPLETED",                 # Cannot move on to recirculate without completing full rinseback.
    40: "REQUEST_REJECT_REASON_RESERVOIR_ONE_IS_NOT_READY",              # Reservoir one fill is not complete
    41: "REQUEST_REJECT_REASON_PUMP_TRACK_NOT_CLOSED",                   # Pump track is not ready / closed
    42: "REQUEST_REJECT_REASON_DOOR_NOT_CLOSED",                         # Door is not closed
    43: "REQUEST_REJECT_REASON_SYRINGE_NOT_PRESENT",                     # Syringe is not present
    44: "REQUEST_REJECT_REASON_DG_DIALYSATE_CAP_OPEN",                   # Dialysate cap open
    45: "REQUEST_REJECT_REASON_DG_CONCENTRATE_CAP_OPEN",                 # Concentrate cap open
    46: "NUM_OF_REQUEST_REJECT_REASONS"                                  # Number of settings change reject codes
    }