/** @file dcc.c 
*   @brief DCC Driver Implementation File
*   @date 11-Dec-2018
*   @version 04.07.01
*
*/

/* 
* Copyright (C) 2009-2018 Texas Instruments Incorporated - www.ti.com  
* 
* 
*  Redistribution and use in source and binary forms, with or without 
*  modification, are permitted provided that the following conditions 
*  are met:
*
*    Redistributions of source code must retain the above copyright 
*    notice, this list of conditions and the following disclaimer.
*
*    Redistributions in binary form must reproduce the above copyright
*    notice, this list of conditions and the following disclaimer in the 
*    documentation and/or other materials provided with the   
*    distribution.
*
*    Neither the name of Texas Instruments Incorporated nor the names of
*    its contributors may be used to endorse or promote products derived
*    from this software without specific prior written permission.
*
*  THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS 
*  "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT 
*  LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
*  A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT 
*  OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, 
*  SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT 
*  LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
*  DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
*  THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT 
*  (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE 
*  OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
*
*/


/* USER CODE BEGIN (0) */
/* USER CODE END */

#include "dcc.h"
#include "sys_vim.h"

/* USER CODE BEGIN (1) */
/* USER CODE END */

/** @fn void dccInit(void)
*   @brief Initializes the DCC Driver
*
*   This function initializes the DCC module.
*/
/* SourceId : DCC_SourceId_001 */
/* DesignId : DCC_DesignId_001 */
/* Requirements: HL_SR305 */
void dccInit(void)
{

/* USER CODE BEGIN (2) */
/* USER CODE END */

    /** @b initialize @b DCC1 */
       
    /** DCC1 Clock0 Counter Seed value configuration */
    dccREG1->CNT0SEED   = 39204U;
    
    /** DCC1 Clock0 Valid Counter Seed value configuration */
    dccREG1->VALID0SEED = 792U;          
    
    /** DCC1 Clock1 Counter Seed value configuration */
    dccREG1->CNT1SEED   = 544500U;

    /** DCC1 Clock1 Source 1 Select */
    dccREG1->CNT1CLKSRC = (uint32)((uint32)10U << 12U) |     /** DCC Enable / Disable Key */
                          (uint32) DCC1_CNT1_PLL1;  /** DCC1 Clock Source 1 */
   
    dccREG1->CNT0CLKSRC = (uint32)DCC1_CNT0_OSCIN;  /** DCC1 Clock Source 0 */

    /** DCC1 Global Control register configuration */
    dccREG1->GCTRL      = (uint32)0xAU |       /** Enable / Disable DCC1 */
                          (uint32)((uint32)0xAU << 4U) | /** Error Interrupt */
                          (uint32)((uint32)0x5U << 8U) | /** Single Shot mode */
                          (uint32)((uint32)0xAU << 12U); /** Done Interrupt */


    /** @b initialize @b DCC2 */

    /** DCC2 Clock0 Counter Seed value configuration */
    dccREG2->CNT0SEED   = 0U;
    
    /** DCC2 Clock0 Valid Counter Seed value configuration */
    dccREG2->VALID0SEED = 0U;          
    
    /** DCC2 Clock1 Counter Seed value configuration */
    dccREG2->CNT1SEED   = 0U;

    /** DCC2 Clock1 Source 1 Select */
    dccREG2->CNT1CLKSRC = (uint32)((uint32)0xAU << 12U) |     /** DCC Enable Key */
                          (uint32) DCC2_CNT1_VCLK;  /** DCC2 Clock Source 1 */
   
    dccREG2->CNT0CLKSRC = (uint32)DCC2_CNT0_OSCIN;  /** DCC2 Clock Source 0 */

    /** DCC2 Global Control register configuration */
    dccREG2->GCTRL      = (uint32)0xAU |       /** Enable DCC2 */
                          (uint32)((uint32)0xAU << 4U) | /** Error Interrupt */
                          (uint32)((uint32)0x5U << 8U) | /** Single Shot mode */
                          (uint32)((uint32)0xAU << 12U); /** Done Interrupt */

/* USER CODE BEGIN (3) */
/* USER CODE END */

}

/** @fn void dccSetCounter0Seed(dccBASE_t  *dcc, uint32 cnt0seed)
*   @brief Set dcc Clock source 0 counter seed value
*   @param[in] dcc Pointer to DCC module:
*              - dccREG1: DCC1 module pointer
*              - dccREG2: DCC2 module pointer
*   @param[in] cnt0seed - Clock Source 0 Counter seed value
*
*   This function sets the seed value for Clock source 0 counter.
*
*/
/* SourceId : DCC_SourceId_002 */
/* DesignId : DCC_DesignId_002 */
/* Requirements: HL_SR306 */
void dccSetCounter0Seed(dccBASE_t  *dcc, uint32 cnt0seed)
{
/* USER CODE BEGIN (4) */
/* USER CODE END */

    dcc->CNT0SEED     = cnt0seed;

/* USER CODE BEGIN (5) */
/* USER CODE END */
}

/** @fn void dccSetTolerance(dccBASE_t  *dcc, uint32 valid0seed)
*   @brief Set dcc Clock source 0 counter seed value
*   @param[in] dcc Pointer to DCC module:
*              - dccREG1: DCC1 module pointer
*              - dccREG2: DCC2 module pointer
*   @param[in] valid0seed - Clock Source 0 Counter tolerance value
*
*   This function sets the seed value for Clock source 0 tolerance or 
*    valid counter.
*
*/
/* SourceId : DCC_SourceId_003 */
/* DesignId : DCC_DesignId_003 */
/* Requirements: HL_SR307 */
void dccSetTolerance(dccBASE_t  *dcc, uint32 valid0seed)
{
/* USER CODE BEGIN (6) */
/* USER CODE END */

    dcc->VALID0SEED = valid0seed;

/* USER CODE BEGIN (7) */
/* USER CODE END */
}

/** @fn void dccSetCounter1Seed(dccBASE_t  *dcc, uint32 cnt1seed)
*   @brief Set dcc Clock source 1 counter seed value
*   @param[in] dcc Pointer to DCC module:
*              - dccREG1: DCC1 module pointer
*              - dccREG2: DCC2 module pointer
*   @param[in] cnt1seed - Clock Source 1 Counter seed value
*
*   This function sets the seed value for Clock source 1 counter.
*
*/
/* SourceId : DCC_SourceId_004 */
/* DesignId : DCC_DesignId_004 */
/* Requirements: HL_SR308 */
void dccSetCounter1Seed(dccBASE_t  *dcc, uint32 cnt1seed)
{
/* USER CODE BEGIN (8) */
/* USER CODE END */

    dcc->CNT1SEED     = cnt1seed;

/* USER CODE BEGIN (9) */
/* USER CODE END */
}

/** @fn void dccSetSeed(dccBASE_t  *dcc, uint32 cnt0seed, uint32 valid0seed, uint32 cnt1seed)
*   @brief Set dcc Clock source 0 counter seed value
*   @param[in] dcc Pointer to DCC module:
*              - dccREG1: DCC1 module pointer
*              - dccREG2: DCC2 module pointer
*   @param[in] cnt0seed        - Clock Source 0 Counter seed value.
*   @param[in] valid0seed    - Clock Source 0 Counter tolerance value.
*   @param[in] cnt1seed        - Clock Source 1 Counter seed value.
*
*   This function sets the seed value for clock source 0, clock source 1 
*    and tolerance counter.
*
*/
/* SourceId : DCC_SourceId_005 */
/* DesignId : DCC_DesignId_005 */
/* Requirements: HL_SR309 */
void dccSetSeed(dccBASE_t  *dcc, uint32 cnt0seed, uint32 valid0seed, uint32 cnt1seed)
{
/* USER CODE BEGIN (10) */
/* USER CODE END */

    dcc->CNT0SEED   = cnt0seed;
    dcc->VALID0SEED = valid0seed;
    dcc->CNT1SEED   = cnt1seed;

/* USER CODE BEGIN (11) */
/* USER CODE END */
}

/** @fn void dccSelectClockSource(dccBASE_t  *dcc, uint32 cnt0_Clock_Source, uint32 cnt1_Clock_Source)
*   @brief Set dcc counter Clock sources
*   @param[in] dcc Pointer to DCC module:
*              - dccREG1: DCC1 module pointer
*              - dccREG2: DCC2 module pointer
*   @param[in] cnt0_Clock_Source - Clock source for counter 0.
*   @param[in] cnt1_Clock_Source - Clock source for counter 1.
*
*   This function sets the dcc counter 0 and counter 1 clock sources.
*   DCC must be disabled using dccDisable API before calling this 
*   function.
*/
/* SourceId : DCC_SourceId_006 */
/* DesignId : DCC_DesignId_006 */
/* Requirements: HL_SR310 */
void dccSelectClockSource(dccBASE_t  *dcc, uint32 cnt0_Clock_Source, uint32 cnt1_Clock_Source)
{
/* USER CODE BEGIN (12) */
/* USER CODE END */

    dcc->CNT1CLKSRC  = ((uint32)((uint32)0xAU << 12U) |     		/** DCC Enable Key */
	                    (uint32)(cnt1_Clock_Source & 0x0000000FU));	/* Configure Clock source 1 */
    dcc->CNT0CLKSRC  = cnt0_Clock_Source;  							/* Configure Clock source 0 */
	
/* USER CODE BEGIN (13) */
/* USER CODE END */
}

/** @fn void dccEnable(dccBASE_t  *dcc)
*   @brief Enable dcc module to begin counting
*   @param[in] dcc Pointer to DCC module:
*              - dccREG1: DCC1 module pointer
*              - dccREG2: DCC2 module pointer
*
*   This function enables the dcc counters to begin counting.
*
*/
/* SourceId : DCC_SourceId_007 */
/* DesignId : DCC_DesignId_007 */
/* Requirements: HL_SR311 */
void dccEnable(dccBASE_t  *dcc)
{
/* USER CODE BEGIN (14) */
/* USER CODE END */
/*SAFETYMCUSW 134 S MR:12.2 <APPROVED> "LDRA Tool issue" */
    dcc->GCTRL = (dcc->GCTRL & 0xFFFFFFF0U) | 0xAU; 

/* USER CODE BEGIN (15) */
/* USER CODE END */
}

/** @fn void dccDisable(dccBASE_t  *dcc)
*   @brief Make selected dcc module to stop counting
*   @param[in] dcc Pointer to DCC module:
*              - dccREG1: DCC1 module pointer
*              - dccREG2: DCC2 module pointer
*
*   This function stops the dcc counters from counting.
*
*/
/* SourceId : DCC_SourceId_008 */
/* DesignId : DCC_DesignId_008 */
/* Requirements: HL_SR312 */
void dccDisable(dccBASE_t  *dcc)
{
/* USER CODE BEGIN (16) */
/* USER CODE END */
/*SAFETYMCUSW 134 S MR:12.2 <APPROVED> "LDRA Tool issue" */
    dcc->GCTRL = (dcc->GCTRL & 0xFFFFFFF0U) | 0x5U; 

/* USER CODE BEGIN (17) */
/* USER CODE END */
}

/** @fn uint32 dccGetErrStatus(dccBASE_t  *dcc)
*   @brief Get error status from selected dcc module
*   @param[in] dcc Pointer to DCC module:
*              - dccREG1: DCC1 module pointer
*              - dccREG2: DCC2 module pointer
*
*   @return The Error status of selected dcc module
*
*   Returns the error status of selected dcc module.
*
*/
/* SourceId : DCC_SourceId_009 */
/* DesignId : DCC_DesignId_009 */
/* Requirements: HL_SR313 */
uint32 dccGetErrStatus(dccBASE_t  *dcc)
{
/* USER CODE BEGIN (18) */
/* USER CODE END */

    return(dcc->STAT & 0x00000001U); 
}

/** @fn void dccEnableNotification(dccBASE_t  *dcc, uint32 notification)
*   @brief Enable notification of selected DCC module
*   @param[in] dcc Pointer to DCC module:
*              - dccREG1: DCC1 module pointer
*              - dccREG2: DCC2 module pointer
*   @param[in] notification Select notification of DCC module:
*              - dccNOTIFICATION_DONE:    DCC DONE notification
*              - dccNOTIFICATION_ERROR: DCC ERROR notification
*
*   This function will enable the selected notification of a DCC module.
*   It is possible to enable multiple notifications masked.
*/
/* SourceId : DCC_SourceId_010 */
/* DesignId : DCC_DesignId_010 */
/* Requirements: HL_SR314 */
void dccEnableNotification(dccBASE_t  *dcc, uint32 notification)
{
/* USER CODE BEGIN (19) */
/* USER CODE END */
/*SAFETYMCUSW 134 S MR:12.2 <APPROVED> "LDRA Tool issue" */
    dcc->GCTRL = ((dcc->GCTRL & 0xFFFF0F0FU) | notification); 

/* USER CODE BEGIN (20) */
/* USER CODE END */
}

/** @fn void dccDisableNotification(dccBASE_t  *dcc, uint32 notification)
*   @brief Disable notification of selected DCC module
*   @param[in] dcc Pointer to DCC module:
*              - dccREG1: DCC1 module pointer
*              - dccREG2: DCC2 module pointer
*   @param[in] notification Select notification of DCC module:
*              - dccNOTIFICATION_DONE:    DCC DONE notification
*              - dccNOTIFICATION_ERROR: DCC ERROR notification
*
*   This function will enable the selected notification of a DCC module.
*   It is possible to enable multiple notifications masked.
*/
/* SourceId : DCC_SourceId_011 */
/* DesignId : DCC_DesignId_011 */
/* Requirements: HL_SR315 */
void dccDisableNotification(dccBASE_t  *dcc, uint32 notification)
{
/* USER CODE BEGIN (21) */
/* USER CODE END */
/*SAFETYMCUSW 134 S MR:12.2 <APPROVED> "LDRA Tool issue" */
    dcc->GCTRL = ((dcc->GCTRL & 0xFFFF0F0FU) | ((~notification) & 0x0000F0F0U));

/* USER CODE BEGIN (22) */
/* USER CODE END */
}

/** @fn void dcc1GetConfigValue(dcc_config_reg_t *config_reg, config_value_type_t type)
*   @brief Get the initial or current values of the configuration registers
*
*    @param[in] *config_reg: pointer to the struct to which the initial or current value of the configuration registers need to be stored
*    @param[in] type:     whether initial or current value of the configuration registers need to be stored
*                        - InitialValue: initial value of the configuration registers will be stored in the struct pointed by config_reg
*                        - CurrentValue: initial value of the configuration registers will be stored in the struct pointed by config_reg
*
*   This function will copy the initial or current value (depending on the parameter 'type') of the configuration registers to the struct pointed by config_reg
*
*/
/* SourceId : DCC_SourceId_012 */
/* DesignId : DCC_DesignId_012 */
/* Requirements: HL_SR318 */
void dcc1GetConfigValue(dcc_config_reg_t *config_reg, config_value_type_t type)
{
    if (type == InitialValue)
    {
        config_reg->CONFIG_GCTRL = DCC1_GCTRL_CONFIGVALUE;
        config_reg->CONFIG_CNT0SEED = DCC1_CNT0SEED_CONFIGVALUE;
        config_reg->CONFIG_VALID0SEED = DCC1_VALID0SEED_CONFIGVALUE;
        config_reg->CONFIG_CNT1SEED = DCC1_CNT1SEED_CONFIGVALUE;
        config_reg->CONFIG_CNT1CLKSRC = DCC1_CNT1CLKSRC_CONFIGVALUE;
        config_reg->CONFIG_CNT0CLKSRC = DCC1_CNT0CLKSRC_CONFIGVALUE;
    }
    else
    {
	/*SAFETYMCUSW 134 S MR:12.2 <APPROVED> "LDRA Tool issue" */
        config_reg->CONFIG_GCTRL = dccREG1->GCTRL;
        config_reg->CONFIG_CNT0SEED = dccREG1->CNT0SEED;
        config_reg->CONFIG_VALID0SEED = dccREG1->VALID0SEED;
        config_reg->CONFIG_CNT1SEED = dccREG1->CNT1SEED;
        config_reg->CONFIG_CNT1CLKSRC = dccREG1->CNT1CLKSRC;
        config_reg->CONFIG_CNT0CLKSRC = dccREG1->CNT0CLKSRC;
    }
}

/** @fn void dcc2GetConfigValue(rti_config_reg_t *config_reg, config_value_type_t type)
*   @brief Get the initial or current values of the configuration registers
*
*    @param[in] *config_reg: pointer to the struct to which the initial or current value of the configuration registers need to be stored
*    @param[in] type:     whether initial or current value of the configuration registers need to be stored
*                        - InitialValue: initial value of the configuration registers will be stored in the struct pointed by config_reg
*                        - CurrentValue: initial value of the configuration registers will be stored in the struct pointed by config_reg
*
*   This function will copy the initial or current value (depending on the parameter 'type') of the configuration registers to the struct pointed by config_reg
*
*/
/* SourceId : DCC_SourceId_013 */
/* DesignId : DCC_DesignId_012 */
/* Requirements: HL_SR318 */
void dcc2GetConfigValue(dcc_config_reg_t *config_reg, config_value_type_t type)
{
    if (type == InitialValue)
    {
        config_reg->CONFIG_GCTRL = DCC2_GCTRL_CONFIGVALUE;
        config_reg->CONFIG_CNT0SEED = DCC2_CNT0SEED_CONFIGVALUE;
        config_reg->CONFIG_VALID0SEED = DCC2_VALID0SEED_CONFIGVALUE;
        config_reg->CONFIG_CNT1SEED = DCC2_CNT1SEED_CONFIGVALUE;
        config_reg->CONFIG_CNT1CLKSRC = DCC2_CNT1CLKSRC_CONFIGVALUE;
        config_reg->CONFIG_CNT0CLKSRC = DCC2_CNT0CLKSRC_CONFIGVALUE;
    }
    else
    {
	/*SAFETYMCUSW 134 S MR:12.2 <APPROVED> "LDRA Tool issue" */
        config_reg->CONFIG_GCTRL = dccREG2->GCTRL;
        config_reg->CONFIG_CNT0SEED = dccREG2->CNT0SEED;
        config_reg->CONFIG_VALID0SEED = dccREG2->VALID0SEED;
        config_reg->CONFIG_CNT1SEED = dccREG2->CNT1SEED;
        config_reg->CONFIG_CNT1CLKSRC = dccREG2->CNT1CLKSRC;
        config_reg->CONFIG_CNT0CLKSRC = dccREG2->CNT0CLKSRC;
    }
}