Index: AlarmDefs.h =================================================================== diff -u -r077ce941218aa93817d8be9b1275069be286cd2b -r09ea26a9c0658e248682d35c8fde41a8483948d7 --- AlarmDefs.h (.../AlarmDefs.h) (revision 077ce941218aa93817d8be9b1275069be286cd2b) +++ AlarmDefs.h (.../AlarmDefs.h) (revision 09ea26a9c0658e248682d35c8fde41a8483948d7) @@ -249,10 +249,10 @@ ALARM_ID_BLOOD_SITTING_WARNING = 211, ///< Blood sitting too long warning (>4 min) ALARM_ID_END_OF_TREATMENT_ALARM = 212, ///< HD end of treatment alarm (user not acting to end treatment) ALARM_ID_PRIME_COMPLETED_MEDIUM = 213, ///< HD prime completed medium priority alarm - ALARM_ID_SALINE_BOLUS_VOLUME_CHECK_FAILURE = 214, ///< HD Saline bolus volume check failure - ALARM_ID_RINSEBACK_VOLUME_CHECK_FAILURE = 215, ///< HD rinseback volume check failure + ALARM_ID___AVAILABLE_9 = 214, ///< Available for use + ALARM_ID___AVAILABLE_10 = 215, ///< Available for use ALARM_ID_END_TREATMENT_TIMEOUT_ALARM = 216, ///< HD end treatment sub-mode timeout alarm - ALARM_ID_BLOOD_PRIME_VOLUME_CHECK_FAILURE = 217, ///< HD blood prime volume check failure + ALARM_ID___AVAILABLE_11 = 217, ///< Available for use ALARM_ID_HD_SYRINGE_DETECTED = 218, ///< HD syringe detected alarm ALARM_ID_HD_SYRINGE_PUMP_SYRINGE_REMOVED = 219, ///< HD syringe pump syringe removed alarm ALARM_ID_DG_THD_SENSORS_FPGA_FAULT = 220, ///< DG THd sensors FPGA fault @@ -696,10 +696,10 @@ { ALARM_PRIORITY_HIGH, 290, FALSE, FALSE, TRUE , TRUE , FALSE, FALSE, FALSE, FALSE, FALSE, FALSE, FALSE, FALSE, ALARM_ID_BLOOD_SITTING_WARNING, 0, ALARM_ID_NO_ALARM }, { ALARM_PRIORITY_HIGH, 290, FALSE, FALSE, TRUE , TRUE , FALSE, FALSE, FALSE, FALSE, FALSE, FALSE, FALSE, FALSE, ALARM_ID_END_OF_TREATMENT_ALARM, 0, ALARM_ID_NO_ALARM }, { ALARM_PRIORITY_MEDIUM, 802, FALSE, FALSE, FALSE, TRUE , FALSE, TRUE , TRUE , TRUE , TRUE , TRUE , TRUE , FALSE, ALARM_ID_PRIME_COMPLETED_MEDIUM, 0, ALARM_ID_NO_ALARM }, - { ALARM_PRIORITY_MEDIUM, 899, FALSE, FALSE, TRUE , TRUE , FALSE, FALSE, FALSE, FALSE, TRUE , TRUE , FALSE, FALSE, ALARM_ID_SALINE_BOLUS_VOLUME_CHECK_FAILURE, 0, ALARM_ID_NO_ALARM }, - { ALARM_PRIORITY_MEDIUM, 899, FALSE, FALSE, TRUE , TRUE , FALSE, FALSE, FALSE, FALSE, TRUE , TRUE , FALSE, FALSE, ALARM_ID_RINSEBACK_VOLUME_CHECK_FAILURE, 0, ALARM_ID_NO_ALARM }, + { ALARM_PRIORITY_MEDIUM, 899, FALSE, FALSE, TRUE , TRUE , FALSE, FALSE, FALSE, FALSE, TRUE , TRUE , FALSE, FALSE, ALARM_ID___AVAILABLE_9, 0, ALARM_ID_NO_ALARM }, + { ALARM_PRIORITY_MEDIUM, 899, FALSE, FALSE, TRUE , TRUE , FALSE, FALSE, FALSE, FALSE, TRUE , TRUE , FALSE, FALSE, ALARM_ID___AVAILABLE_10, 0, ALARM_ID_NO_ALARM }, { ALARM_PRIORITY_HIGH, 291, FALSE, FALSE, FALSE, TRUE , FALSE, TRUE , FALSE, FALSE, FALSE, TRUE , FALSE, FALSE, ALARM_ID_END_TREATMENT_TIMEOUT_ALARM, 0, ALARM_ID_NO_ALARM }, - { ALARM_PRIORITY_MEDIUM, 899, FALSE, FALSE, TRUE , TRUE , FALSE, FALSE, FALSE, FALSE, TRUE , TRUE , FALSE, FALSE, ALARM_ID_BLOOD_PRIME_VOLUME_CHECK_FAILURE, 0, ALARM_ID_NO_ALARM }, + { ALARM_PRIORITY_MEDIUM, 899, FALSE, FALSE, TRUE , TRUE , FALSE, FALSE, FALSE, FALSE, TRUE , TRUE , FALSE, FALSE, ALARM_ID___AVAILABLE_11, 0, ALARM_ID_NO_ALARM }, { ALARM_PRIORITY_MEDIUM, 899, FALSE, FALSE, TRUE , FALSE, FALSE, FALSE, FALSE, FALSE, TRUE , TRUE , FALSE, FALSE, ALARM_ID_HD_SYRINGE_DETECTED, 0, ALARM_ID_NO_ALARM }, { ALARM_PRIORITY_HIGH , 799, FALSE, FALSE, TRUE , FALSE, FALSE, FALSE, FALSE, FALSE, TRUE , TRUE , FALSE, FALSE, ALARM_ID_HD_SYRINGE_PUMP_SYRINGE_REMOVED, 0, ALARM_ID_NO_ALARM }, { ALARM_PRIORITY_HIGH, 110, FALSE, TRUE , TRUE , TRUE , FALSE, TRUE , FALSE, FALSE, FALSE, TRUE , FALSE, FALSE, ALARM_ID_DG_THD_SENSORS_FPGA_FAULT, 0, ALARM_ID_NO_ALARM }, @@ -1109,9 +1109,9 @@ { 899, ALARM_ID_DG_CHEM_DISINFECT_FLUSH_FLUSH_SAMPLE }, { 899, ALARM_ID_DG_CHEM_DISINFECT_FLUSH_REMOVE_ACID }, { 899, ALARM_ID_DG_CHEM_DISINFECT_INSERT_ACID }, - { 899, ALARM_ID_SALINE_BOLUS_VOLUME_CHECK_FAILURE }, - { 899, ALARM_ID_RINSEBACK_VOLUME_CHECK_FAILURE }, - { 899, ALARM_ID_BLOOD_PRIME_VOLUME_CHECK_FAILURE }, + { 899, ALARM_ID___AVAILABLE_9 }, + { 899, ALARM_ID___AVAILABLE_10 }, + { 899, ALARM_ID___AVAILABLE_11 }, { 899, ALARM_ID_HD_SYRINGE_DETECTED }, { 899, ALARM_ID___AVAILABLE_6 }, { 899, ALARM_ID_DG_CONCENTRATE_CAP_NOT_IN_PROPER_POSITION }, @@ -1169,7 +1169,7 @@ { 12 , ALARM_ID_HD_INTEGRITY_POST_TEST_FAILED , "HD | Self Test Error | Call service to schedule a repair. | HD firmware image integrity POST test failed | If the calculated CRC of the HD image does not match the expected CRC. | "}, { 13 , ALARM_ID_DG_INTEGRITY_POST_TEST_FAILED , "DG | Self Test Error | Call service to schedule a repair. | DG firmware image integrity POST test failed | If the calculated CRC of the DG firmware image does not matched the expected CRC | "}, { 14 , ALARM_ID_DG_INVALID_USAGE_RECORD_CRC , "DG | Self Test Error | Call service to schedule a repair. | DG non-volatile usage information group invalid record CRC | If the DG usage information record's CRC does not match the calculated CRC in POST. | "}, - { 15 , ALARM_ID_AVAILABLE_60 , "N/A | Not Used | N/A. | HD non-volatile usage information group invalid record CRC | If the HD usage information record's CRC does not match the calculated CRC in POST. | "}, + { 15 , ALARM_ID_AVAILABLE_60 , "NA | Not Used | N/A. | | | "}, { 16 , ALARM_ID_HD_ALARM_AUDIO_SELF_TEST_FAILURE , "HD | Self Test Error | Call service to schedule a repair. | HD alarm audio failed POST | If alarm audio current is NOT sufficiently high for at more than 1 second indicating alarm tone is being output | "}, { 17 , ALARM_ID_HD_UI_POST_FAILED , "HD | Self Test Error | Call service to schedule a repair. | HD UI POST failed | If User Interface has not sent POST results within 2 seconds. | "}, { 18 , ALARM_ID_HD_CAN_MESSAGE_NOT_ACKED_DG , "HD | Communication Error | Call service to schedule a repair. | HD did not get ACK on message to DG that required acknowledgement | If no retries left in the pending acknowlegement. | "}, @@ -1246,7 +1246,7 @@ { 89 , ALARM_ID_DG_OUTLET_UV_REACTOR_ON_WITH_NO_FLOW , "DG | UV Reactor Error | Call service to schedule a repair. | DG outlet UV reactor is on while there is no flow | If the outlet UV reactor is on while the RO flow is less than 200 mL/min. | "}, { 90 , ALARM_ID_DG_LOAD_CELL_A1_B1_FPGA_FAULT , "DG | FPGA Error | Call service to schedule a repair. | DG load cells A1/B1 FPGA fault | If the FPGA does not report fresh data or indicates an error for a certain period of time. | "}, { 91 , ALARM_ID_HD_DIALYSATE_FLOW_DATA_NOT_RECEIVE , "HD | Dialysate Measurement Error | Call service to schedule a repair. | HD No dialysate flow data receive in the last 3 seconds | If not receiving new dialysate flow readings in expected interval (3 seconds) | "}, - { 92 , ALARM_ID_AVAILABLE_50 , "N/A | N/A | N/A | N/A | N/A | "}, + { 92 , ALARM_ID_AVAILABLE_50 , "NA | N/A | N/A | N/A | N/A | "}, { 93 , ALARM_ID_DG_OUTLET_PRIMARY_CONDUCTIVITY_OUT_OF_RANGE , "DG | Conductivity Sensors Error | Call service to schedule a repair. | DG outlet primary conductivity sensor out of range | If the outlet primary conductivity sensor, CPo is greater than 30 uS/cm for a certain period of time. | "}, { 94 , ALARM_ID_DG_PRESSURE_OUT_OF_RANGE , "DG | Pressure Sensors Error | Call service to schedule a repair. | DG pressure sensor out of range | If either of the pressure sensors is < 0 psia or > 200 psia or the barometric pressure sensor is > 10.1 psi or < 15.4 psi. | "}, { 95 , ALARM_ID_DG_WATCHDOG_EXPIRED , "DG | Watchdog Error | Call service to schedule a repair. | DG watchdog expired | If the watchdog signal is low while not in POST. | "}, @@ -1270,7 +1270,7 @@ { 113 , ALARM_ID_DG_DRAIN_PUMP_CURRENT_OUT_OF_RANGE , "DG | Drain Pump Error | Call service to schedule a repair. | DG drain pump current out of range | If the DG drain pump current > 2.2 A when it is in open loop or if the current > 0.1 A when it is off. | "}, { 114 , ALARM_ID_HD_VENOUS_BUBBLE_SELF_TEST_FAILURE , "HD | Air Bubble Detector Error | Call service to schedule a repair. | HD venous air bubble detector self-test failure | If the venous air bubble self test did not detect bubble for more than 500 msec. | "}, { 115 , ALARM_ID_DG_TEMPERATURE_SENSOR_OUT_OF_RANGE , "DG | Dialysate Temperature Error | Call service to schedule a repair. | DG temperature sensor out of range | If the measured temperature < 0 C or > 80 C for the non-fluid inline sensors and > 120 C for the fluid sensors. | "}, - { 116 , ALARM_ID_DG___AVAILABLE_4 , "NA | Not used | Call service to schedule a repair. | DG temperature sensor ADC out of range | If the ADC value of the sensor is not out of range. | "}, + { 116 , ALARM_ID_DG___AVAILABLE_4 , "NA | Not used | Call service to schedule a repair. | | | "}, { 117 , ALARM_ID_DG_CAN_MESSAGE_NOT_ACKED , "DG | Machine Error | Call service to schedule a repair. | System message that required acknowledgment was not acknowledged | If no retries left in the pending acknowlegement list. | "}, { 118 , ALARM_ID_DG_RTC_CONFIG_ERROR , "DG | RTC Error | Call service to schedule a repair. | DG RTC configuration error | If the RTC configuration registers report an error. | "}, { 119 , ALARM_ID_DG_RTC_BATTERY_LOW , "DG | RTC Error | Call service to schedule a repair. | DG RTC battery low | If the RTC battery bit report a low alarm. | "}, @@ -1321,7 +1321,7 @@ { 163 , ALARM_ID_HD_LOAD_CELL_ACCELERATION_RES_1_ALARM , "HD | Ultrafiltration Measurement Error | Ultrafiltration error. | HD sees primary load cell for reservoir 1 change too much too fast | If the delta volume of the active reservoir exceeded 50.0 g (MAX_ACTIVE_LOAD_CELL_CHANGE_G). | "}, { 164 , ALARM_ID_HD_LOAD_CELL_ACCELERATION_RES_2_ALARM , "HD | Ultrafiltration Measurement Error | Ultrafiltration error. | HD sees primary load cell for reservoir 2 change too much too fast | If the delta volume of the active reservoir exceeded 50.0 g (MAX_ACTIVE_LOAD_CELL_CHANGE_G). | "}, { 165 , ALARM_ID_TREATMENT_RINSEBACK_TIMEOUT_ALARM , "HD | Rinseback Timeout | Maximum Rinseback time exceeded. Rinseback must end. | HD in treatment rinseback operation timeout | If the maximum time inrinseback operation has been exceeded. | "}, - { 166 , ALARM_ID___AVAILABLE_5 , "NA | Not used | Call service to schedule a repair. | HD in treatment re-circ sub-mode for too long | If the maximum time in recirculate sub-mode has been exceeded. | "}, + { 166 , ALARM_ID___AVAILABLE_5 , "NA | Not used | Call service to schedule a repair. | | | "}, { 167 , ALARM_ID_CARTRIDGE_DOOR_OPENED , "HD | Door Open | Hemodialysis Delivery device door open.\n - Close open HD door\n - Press RESUME button | HD cartridge door opened alarm | If the cartridge door is opened as reported by the FPGA. | "}, { 168 , ALARM_ID_HD_ACTIVE_RESERVOIR_DEPLETION_TIME_OUT , "DG | Dialysate Recirculation Error | Dialysate recirculation error. | HD active reservoir depletion timeout. | If the active reservoir's depletion time has elapsed. | "}, { 169 , ALARM_ID_DG_DIALYSATE_FLOW_RATE_OUT_OF_MAX_RANGE , "DG | Dialysate Generation Error | Call service to schedule a repair. | Dialysate flow rate out of range | If the dialysate flow rate > 2.00 L/min. | "}, @@ -1358,7 +1358,7 @@ { 200 , ALARM_ID_DG_THERMISTORS_TEMPERATURE_OUT_OF_RANGE , "DG | Thermistors Error | Call service to schedule a repair. | DG thermistor or temperature sensor out of range | If thermistor > 80.0 C or < 0.0 C. | "}, { 201 , ALARM_ID_PRE_TREATMENT_WET_FLOW_TEST_FAILURE , "HD | Pre-Treatment Error | Call service to schedule a repair. | HD pre-treatment wet flow test failure | If the pre-treatment wet flow test has failed. | "}, { 202 , ALARM_ID_PRE_TREATMENT_DRY_PRESSURE_NORMAL_TEST_FAILURE , "HD | Pre-Treatment Error | Call service to schedule a repair. | HD pre-treatment dry pressure normal test failure | If the pre-treatment dry pressure normla test failed. | "}, - { 203 , ALARM_ID___AVAILABLE_3 , "NA | Not used | Call service to schedule a repair. | DG pressure sensors fault | If pressure sensor ADC reading = 0 or inlet pressure ADC reading > 4095 (12-bit full scale ). | "}, + { 203 , ALARM_ID___AVAILABLE_3 , "NA | Not used | Call service to schedule a repair. | | | "}, { 204 , ALARM_ID_RO_REJECTION_RATIO_OUT_OF_RANGE , "DG | RO Rejection Error | Call service to schedule a repair. | RO rejection ratio out of range | If RO rejection ratio > 0.1 and outlet water conductivity > 15.0 uS/cm. | "}, { 205 , ALARM_ID_CONDUCTIVITY_SENSOR_FAULT , "DG | Conductivity Sensors Error | Call service to schedule a repair. | Conductivity sensor fault | If conductivity sensor error count reported by the FPGA > 0 for more than 5 times. | "}, { 206 , ALARM_ID_DG_DIALYSATE_FILL_OUT_OF_TIME , "DG | Dialysate Production Error | Call service to schedule a repair. | DG dialysate fill runs out of time | If DG dialysate fill > 5 minutes. | "}, @@ -1369,10 +1369,10 @@ { 211 , ALARM_ID_BLOOD_SITTING_WARNING , "HD | Blood Stagnant | Maximum time for blood stoppage has been exceeded. | Blood sitting too long warning (> 4 min) | During treatment stop sub-mode, if the blood is in the line for more than 4 minutes. | "}, { 212 , ALARM_ID_END_OF_TREATMENT_ALARM , "HD | Blood Stagnant | Maximum time for blood stoppage has been exceeded. | Blood sitting too long warning (> 4 min) | During treatment end paused state, if the blood is in the line for more than 4 minutes. | "}, { 213 , ALARM_ID_PRIME_COMPLETED_MEDIUM , "HD | Prime Complete | Prime of the bloodlines is complete. | HD prime completed medium priority alarm | If alarm 226 is not cleared by user within 90 minutes. | "}, - { 214 , ALARM_ID_SALINE_BOLUS_VOLUME_CHECK_FAILURE , "HD | Saline Bolus Error | Inability to deliver saline bolus.\n- Check for kinks or clamped lines in the saline line. | HD Saline bolus volume check failure | If the saline bolus is under or over delivering. | "}, - { 215 , ALARM_ID_RINSEBACK_VOLUME_CHECK_FAILURE , "HD | Rinseback Error | Unable to complete Rinseback.\n- Check for kinks or clamped blood lines. | HD rinseback volume check failure | If the delta between the expected rinseback volume and the measured rinseback volume > 60.0 mL. | "}, + { 214 , ALARM_ID___AVAILABLE_9 , "NA | Not Used | Call service to schedule a repair. | | | "}, + { 215 , ALARM_ID___AVAILABLE_10 , "NA | Not Usedvvvvvvv | Call service to schedule a repair. | | | "}, { 216 , ALARM_ID_END_TREATMENT_TIMEOUT_ALARM , "HD | Treatment Ended | Treatment has ended | HD end treatment sub-mode timeout alarm | If the treatment ended successfully. | "}, - { 217 , ALARM_ID_BLOOD_PRIME_VOLUME_CHECK_FAILURE , "HD | Prime Error | Blood prime error. Check for kinks or clamped blood lines. | HD blood prime volume check failure | If expected blood prime volume - blood prime volume > 60.0 mL. | "}, + { 217 , ALARM_ID___AVAILABLE_11 , "NA | Not Used | Call service to schedule a repair. | | | "}, { 218 , ALARM_ID_HD_SYRINGE_DETECTED , "HD | Syringe Detected | Remove Heparin syringe. | HD syringe detected alarm | If the syringe detection switch > 2.0 volts. | "}, { 219 , ALARM_ID_HD_SYRINGE_PUMP_SYRINGE_REMOVED , "HD | Syringe Removed | Install Heparin syringe. | HD syringe pump syringe removed alarm | If the syringe detection switch < 2.0 volts. | "}, { 220 , ALARM_ID_DG_THD_SENSORS_FPGA_FAULT , "DG | FPGA Error | Call service to schedule a repair. | DG THd sensor FPGA fault | If the FPGA does not report fresh data or indicates an error for a certain period of time. | "}, @@ -1403,7 +1403,7 @@ { 244 , ALARM_ID_DG_CLEANING_MODE_TEMP_SENSORS_DIFF_OUT_OF_RANGE , "DG | Cleaning Mode Error | Call service to schedule a repair. | DG temperature sensors difference out of range | If any of the temperature sensors are out of the average of the sensors by more than 3 C. | "}, { 245 , ALARM_ID_DG_HEAT_DISINFECT_TARGET_TEMP_TIMEOUT , "DG | Heat Disinfection Error | Call service to schedule a repair. | DG heat disinfect target temperature time out (could not reach to temperature) | If heating up to minimum temperature for heat disinfect failed after 4 hours. | "}, { 246 , ALARM_ID_DG_CLEANING_MODE_COND_SENSORS_OUT_OF_RANGE , "DG | Chemical Disinfection Error | Call service to schedule a repair. | DG chemical disinfect inlet conducitivty out of range | If CPo and CD2 conductivity values are above 100 uS/cm. | "}, - { 247 , ALARM_ID_AVAILABLE_62 , "N/A | Not Used | Call service to schedule a repair. | DG heat disinfect active cool time out | If THd > 44 C after 90 minutes of cooling. | "}, + { 247 , ALARM_ID_AVAILABLE_62 , "NA | Not Used | Call service to schedule a repair. | | | "}, { 248 , ALARM_ID_DG_CHEM_DISINFECT_TARGET_TEMP_OUT_OF_RANGE , "DG | Chemical Disinfection Error | Call service to schedule a repair. | DG chemical disinfect out of target temperature | If TPo > 50 C after 1 second. | "}, { 249 , ALARM_ID_DG_CHEM_DISINFECT_TARGET_COND_OUT_OF_RANGE , "DG | Chemical Disinfection Error | Call service to schedule a repair. | DG chemical disinfect out of target conductivity | If CD2 < 150 uS/cm or CD2 > 650 uS/cm after 10 seconds. | "}, // Num Alarm ID Device Display Title Instructions Description Trigger Condition @@ -1414,8 +1414,8 @@ { 254 , ALARM_ID_DG_INVALID_SERVICE_RECORD_CRC , "DG | Machine Error | Call service to schedule a repair. | DG invalid service record | If the calculated CRC of the DG service record image does not match the expected CRC. | "}, { 255 , ALARM_ID_HD_UI_COMPATIBILITY_ERROR , "HD | Machine Error | Call service to schedule a repair. | HD and UI software builds are not compatible | If the compatibility revision field of the UI is not equal to SW_COMPATIBILITY_REV. | "}, { 256 , ALARM_ID_HD_DISINFECT_CHEM_FLUSH , "HD | Cleaning Modes Start Alarm | No Instructions | DG chemical disinfect flush started | If DG chemical disinfect flush successfully started from the UI. | "}, - { 257 , ALARM_ID_AVAILABLE_51 , "N/A | N/A | N/A | N/A | N/A | "}, - { 258 , ALARM_ID_HD___AVAILABLE_1 , "NA | NOT USED | Call service to schedule a repair. | NOT USED | NOT USED | "}, + { 257 , ALARM_ID_AVAILABLE_51 , "NA | Not Used | Call service to schedule a repair. | | | "}, + { 258 , ALARM_ID_HD___AVAILABLE_1 , "NA | NoT Used | Call service to schedule a repair. | | | "}, { 259 , ALARM_ID_HD_TEMPERATURES_OUT_OF_RANGE , "HD | Temperature Sensors Error | Call service to schedule a repair. | HD temperatures out of range | If thermistor reports temperature > 80.0 C or < 0.0 C for a certain period of time. | "}, { 260 , ALARM_ID_UI_POST_FAILURE_SHASUM , "UI | Machine Error | Call service to schedule a repair. | UI POST Application Integrity (Sha256Sum) failure | If the UI POST reports a shasum faillure. | "}, { 261 , ALARM_ID_UI_POST_FAILURE_CANBUS , "UI | Machine Error | Call service to schedule a repair. | UI POST CANBus failure | If the UI POST reports a can bus failure. | "}, @@ -1430,8 +1430,8 @@ { 270 , ALARM_ID_HD_SAFETY_SHUTDOWN_POST_TEST_FAILED , "HD | Self Test Error | Call service to schedule a repair. | HD POST Safety Shutdown failure | If the 24 volts power source is greater than 5.0 volts during safety shutdown self test state. If the 24 volts power source is less than 22.6 volts during safety shutdown self test recover state. | "}, { 271 , ALARM_ID_DG_SAFETY_SHUTDOWN_POST_TEST_FAILED , "DG | Self Test Error | Call service to schedule a repair. | DG POST Safety Shutdown failure | If the 24 volts power source is greater than 5.0 volts during safety shutdown self test state. If the 24 volts power source is less than 22.6 volts during safety shutdown self test recover state. | "}, { 272 , ALARM_ID_HD_FAN_RPM_OUT_OF_RANGE , "HD | Fans Error | Fan failure.\n- Check that the fans inlets are not blocked or obstructed. | HD Fan RPM out of range | If the fan RPM is out of Min/Max range. | "}, - { 273 , ALARM_ID___AVAILABLE_7 , "NA | Not used | Call service to schedule a repair. | HD measured blood pump flow rate is out of range | If the blood pump flow rate is > 1320.0 mL/min or < 1320.0 mL/min. | "}, - { 274 , ALARM_ID___AVAILABLE_8 , "NA | Not used | Call service to schedule a repair. | HD measured dialysate inlet pump flow rate is out of range | If the DPi pump flow rate is > 1320.0 mL/min or < 1320.0 mL/min. | "}, + { 273 , ALARM_ID___AVAILABLE_7 , "NA | Not used | Call service to schedule a repair. | | | "}, + { 274 , ALARM_ID___AVAILABLE_8 , "NA | Not used | Call service to schedule a repair. | | | "}, { 275 , ALARM_ID_HD_ARTERIAL_PRESSURE_OUT_OF_RANGE , "HD | Arterial Pressure Error | Call service to schedule a repair. | HD arterial pressure sensor is reading out of range | If the arterial pressure > 2000.0 mmHg or < -1500.0 mmHg. | "}, { 276 , ALARM_ID_HD_VENOUS_PRESSURE_OUT_OF_RANGE , "HD | Venous Pressure Error | Call service to schedule a repair. | HD venous pressure sensor is reading out of range | If the venous pressure > 2000.0 mmHg or < -1500.0 mmHg. | "}, { 277 , ALARM_ID_HD_BP_OCCLUSION_OUT_OF_RANGE , "HD | Occlusion Sensor Error | Call service to schedule a repair. | HD BP occlusion sensor is reading out of range | If the blood pump occlusion count is < 2000. | "}, @@ -1442,7 +1442,7 @@ { 282 , ALARM_ID_DG_BICARB_BOTTLE_LOW_VOLUME , "DG | Bicarbonate Concentrate Volume Low | Bicarbonate concentrate low.\n- Replace bicarbonate concentrate bottle. | DG Bicarbonate concentration bottle low volume alarm | If the bicarbonate concentration bottle volume > 3680 (3780 - 100). | "}, { 283 , ALARM_ID_DG_LOAD_CELL_WEIGHT_OUT_OF_RANGE , "DG | Load Cells Error | Call service to schedule a repair. | DG load cells weight out of range | If the weight of the DG load cells > 4500.0 g or < 0.0 g. | "}, { 284 , ALARM_ID_DG_LOAD_CELL_PRIMARY_BACKUP_DRIFT_OUT_OF_RANGE , "DG | Load Cells Error | Call service to schedule a repair. | DG load cells primary/back up drift out of range | If redundant load cells deviate by more than 60g after tare for 5 seconds. | "}, - { 285 , ALARM_ID___AVAILABLE_6 , "NA | Not used | Call service to schedule a repair. | HD treatment recirculate timeout warning | If the maximum time in recirculate sub-mode has been exceeded. | "}, + { 285 , ALARM_ID___AVAILABLE_6 , "NA | Not used | Call service to schedule a repair. | | | "}, { 286 , ALARM_ID_DG_CONCENTRATE_CAP_NOT_IN_PROPER_POSITION , "NA | Not used | Call service to schedule a repair. | HD treatment rinseback complete timeout warning | If the rise back time counter checks have failed when full blood volume has been delivered back to the patient. | "}, { 287 , ALARM_ID_HD_FPGA_CLOCK_SPEED_CHECK_FAILURE , "HD | Machine Error | Call service to schedule a repair. | HD processor clock speed checks against FPGA clock failure | If during initialization mode, the difference between the processor clock speed and the FPGA clock speed > 1. | "}, { 288 , ALARM_ID_HD_LOAD_CELL_PRIMARY_BACKUP_DRIFT_OUT_OF_RANGE , "HD | Load Cells Error | Call service to schedule a repair. | HD load cell inconsistency | If redundant load cells deviate from start to end of a reservoir use during treatment by more than 10g. | "}, @@ -1451,20 +1451,20 @@ { 291 , ALARM_ID_HD_DISINFECT_FLUSH , "HD | Cleaning Modes Start Alarm | No Instructions | DG flush started | If DG flush successfully started from the UI. | "}, { 292 , ALARM_ID_HD_DISINFECT_HEAT , "HD | Cleaning Modes Start Alarm | No Instructions | DG heat disinfect started | If DG heat disinfect successfully started from the UI. | "}, { 293 , ALARM_ID_HD_DISINFECT_CHEM , "HD | Cleaning Modes Start Alarm | No Instructions | DG chemical disinfect started | If DG chemical disinfect successfully started from the UI. | "}, - { 294 , ALARM_ID_AVAILABLE_63 , "N/A | Not Used | No Instructions | DG chemical disinfect instruction 1 | If DG chemical disinfect instruction has been called. | "}, + { 294 , ALARM_ID_AVAILABLE_63 , "NA | Not Used | Call service to schedule a repair. | | | "}, // Num Alarm ID Device Display Title Instructions Description Trigger Condition { 295 , ALARM_ID_UI_POST_FAILURE_CLOUDSYNC , "UI | Machine Error | Call service to schedule a repair. | UI cloud sync POST failure | If the UI POST reports cloud sync failure. | "}, { 296 , ALARM_ID_DG_TDI_SENSORS_FPGA_FAULT , "DG | FPGA Error | Call service to schedule a repair. | DG TDi sensor FPGA fault | If the FPGA does not report fresh data or indicates an error for a certain period of time. | "}, { 297 , ALARM_ID_DG_TRO_SENSORS_FPGA_FAULT , "DG | FPGA Error | Call service to schedule a repair. | DG TRo sensor FPGA fault | If the FPGA does not report fresh data or indicates an error for a certain period of time. | "}, { 298 , ALARM_ID_DG_BARO_SENSOR_FPGA_FAULT , "DG | FPGA Error | Call service to schedule a repair. | DG barometric sensor FPGA fault | If the FPGA does not report fresh data or indicates an error for a certain period of time. | "}, { 299 , ALARM_ID_DG_INVALID_SERIAL_NUMBER , "DG | Self Test Error | Call service to schedule a repair. | DG invalid serial number | If the DG serial number is empty and does not have any characters. | "}, { 300 , ALARM_ID_HD_INVALID_SERIAL_NUMBER , "HD | Self Test Error | Call service to schedule a repair. | HD invalid serial number | If the HD serial number is empty and does not have any characters. | "}, - { 301 , ALARM_ID_AVAILABLE_61 , "N/A | Not Used | Call service to schedule a repair. | DG primary heater power line voltage out of range | If the DG primary heater power line voltage is off from 24V by 10%. | "}, + { 301 , ALARM_ID_AVAILABLE_61 , "NA | Not Used | Call service to schedule a repair. | | | "}, { 302 , ALARM_ID_DG_CPU_RAM_ERROR , "DG | Processor RAM error | Call service to schedule a repair. | DG_CPU RAM error | If the RAM status indicates any of the following: Double bit error, Address decode failure, Address decode logic element failure, Read address parity failure, Write address parity failure. | "}, { 303 , ALARM_ID_DG_DRAIN_PUMP_DIRECTION_FPGA_FAULT , "DG | FPGA Error | Call service to schedule a repair. | DG drain pump direction FPGA fault | If the FPGA indicates an error for a certain period of time. | "}, { 304 , ALARM_ID_HD_INVALID_USAGE_RECORD_CRC , "HD | Self-Test Error | Call service to schedule a repair. | HD invalid usage reocord | If the CRC of the HD usage record does not match the calculated CRC. | "}, { 305 , ALARM_ID_HD_CPU_RAM_ERROR , "HD | Processor RAM error | Call service to schedule a repair. | HD_CPU RAM error | If the RAM status indicates any of the following: Double bit error, Address decode failure, Address decode logic element failure, Read address parity failure, Write address parity failure. | "}, - { 306 , ALARM_ID_DG_CD1_CD2_CHECK_FAULT , "NA | Available | Available | HD air trap overfill fault | If the air trap sensor reports upper level while HD is in treatment mode for a certain period of time. | "}, + { 306 , ALARM_ID_DG_CD1_CD2_CHECK_FAULT , "NA | Available | Available | | If the air trap sensor reports upper level while HD is in treatment mode for a certain period of time. | "}, { 307 , ALARM_ID_HD_AC_POWER_LOST_IN_TREATMENT , "HD | HD AC power loss | HD power has been lost. Check all electrical connections.\n- The display and CPU will run off of the battery until power returns. | HD AC power lost alarm | The HD Software shall trigger an alarm if an AC power loss is detected while the HD system is in pre-treatment, treatment, or post-treatment mode. | "}, { 308 , ALARM_ID_DG_CPI_COND_SENSOR_INVALID_CHAR , "DG | Conductivity Sensors Error | Call service to schedule a repair. | DG CPi conductivity sensor transmits invalid characters | If the CPi conductivity sensor transmits invalid characters for a certain period of time. | "}, { 309 , ALARM_ID_DG_CPO_COND_SENSOR_INVALID_CHAR , "DG | Conductivity Sensors Error | Call service to schedule a repair. | DG CPo conductivity sensor transmits invalid characters | If the CPo conductivity sensor transmits invalid characters for a certain period of time. | "},