Index: MsgDefs.h
===================================================================
diff -u -r67b0a5bedb7b1d1268845668a202a7ff0a5cf253 -red438a9468bc8d977dd6c02403438010d39c23f8
--- MsgDefs.h	(.../MsgDefs.h)	(revision 67b0a5bedb7b1d1268845668a202a7ff0a5cf253)
+++ MsgDefs.h	(.../MsgDefs.h)	(revision ed438a9468bc8d977dd6c02403438010d39c23f8)
@@ -9,7 +9,7 @@
 * @file    MsgDefs.h
 *
 * @author  (last)      Dara Navaei
-* @date    (last)      26-Apr-2023
+* @date    (last)      15-May-2023
 *
 * @author  (original)  Sean
 * @date    (original)  27-Feb-2020
@@ -230,6 +230,8 @@
     MSG_ID_DG_START_STOP_HEAT_DISINFECT_ACTIVE_COOL = 0xC6,             ///< DG heat disinfect active cool start/stop command
     MSG_ID_HD_AIR_PUMP_DATA = 0xC7,                                     ///< HD air pump data publish
     MSG_ID_HD_SEND_CHEM_FLUSH_SAMPLE_PASS_FAIL_TO_DG = 0xC8,            ///< HD send chemical disinfect flush sample pass/fail to DG
+    MSG_ID_DG_START_STOP_RO_PERMEATE_SAMPLE_MODE_CMD_REQUEST = 0xC9,    ///< DG start/stop RO permeate sample mode command request
+    MSG_ID_DG_RO_PERMEATE_SAMPLE_DATA = 0xCA,                           ///< DG RO permeate sample mode data broadcast
 
 #ifdef EMC_TEST_BUILD
     MSG_ID_CAN_ERROR_COUNT = 0x999,  // test code in support of EMC testing
@@ -383,6 +385,12 @@
     MSG_ID_HD_DIAL_OUT_PUMP_HARD_STOP = 0x8090,                         ///< HD dialysate outlet pump hard stop command
     MSG_ID_HD_BLOOD_PUMP_HARD_STOP = 0x8091,                            ///< HD blood pump hard stop command
     MSG_ID_HD_DIALIN_CHECK_IN = 0x8092,                                 ///< HD dialin check in
+    MSG_ID_HD_ENABLE_VENOUS_BUBBLE_ALARM_DETECTION = 0x8093,            ///< HD enable venous bubble alarm detection
+    MSG_ID_HD_GET_TEST_CONFIGURATION = 0x8094,                          ///< HD get test configuration
+    MSG_ID_HD_SEND_TEST_CONFIGURATION = 0x8095,                         ///< HD send test configuration
+    MSG_ID_HD_RESET_ALL_TEST_CONFIGURATIONS = 0x8096,                   ///< HD reset all the configurations
+    MSG_ID_HD_SET_TEST_CONFIGURATION = 0x8097,                          ///< HD set test configuration
+    MSG_ID_HD_SIGNAL_RECOVER_FROM_FAULT_MODE = 0x8098,                  ///< HD signal recover from fault mode
 
     MSG_ID_FIRST_DG_TESTER_MESSAGE = 0xA000,                            ///< First DG test message ID
     MSG_ID_DG_TESTER_LOGIN_REQUEST = MSG_ID_FIRST_DG_TESTER_MESSAGE,    ///< DG tester log-in
@@ -490,6 +498,11 @@
     MSG_ID_DG_SEND_TEST_CONFIGURATION = 0xA068,                         ///< DG send test configuration
     MSG_ID_DG_RESET_ALL_TEST_CONFIGURATIONS = 0xA069,                   ///< DG reset all the configurations
     MSG_ID_DG_DIALIN_CHECK_IN = 0xA06A,                                 ///< DG Dialin check in
+    MSG_ID_DG_GET_LOAD_CELLS_TARE_VALUES = 0xA06B,                      ///< DG get load cells tare values
+    MSG_ID_DG_SET_LOAD_CELLS_TARE_VALUES = 0xA06C,                      ///< DG set load cells tare values
+    MSG_ID_DG_SEND_LOAD_CELLS_TARE_VALUES = 0xA06D,                     ///< DG send load cells tare values to dialin
+    MSG_ID_DG_SET_COND_SENSOR_CAL_TABLE = 0xA06E,                       ///< DG set conductivity sensor's calibration table
+    MSG_ID_DG_SIGNAL_RECOVER_FROM_FAULT_MODE = 0xA06F,                  ///< DG signal recover from fault mode
 
     MSG_ID_HD_DEBUG_EVENT = 0xFFF1,                                     ///< HD debug event text to be logged in event log
     MSG_ID_DG_DEBUG_EVENT = 0xFFF2,                                     ///< DG debug event text to be logged in event log
@@ -522,8 +535,8 @@
     REQUEST_REJECT_REASON_SALINE_BOLUS_IN_PROGRESS = 16,                ///< A saline bolus is in progress
     REQUEST_REJECT_REASON_PARAM_OUT_OF_RANGE = 17,                      ///< A treatment parameter is out of range
     REQUEST_REJECT_REASON_HEPARIN_PRESTOP_EXCEEDS_DURATION = 18,        ///< The Heparin pre-stop setting is greater than the treatment duration
-    REQUEST_REJECT_REASON_ARTERIAL_PRESSURE_LOW_VS_HIGH = 19,           ///< Arterial pressure low and high alarm limits are not inconsistent
-    REQUEST_REJECT_REASON_VENOUS_PRESSURE_LOW_VS_HIGH = 20,             ///< Venous pressure low and high alarm limits are inconsistent
+    REQUEST_REJECT_REASON_AVAILABLE_1 = 19,                             ///< Not used
+    REQUEST_REJECT_REASON_AVAILABLE_2 = 20,                             ///< Not used
     REQUEST_REJECT_REASON_SALINE_MAX_VOLUME_REACHED = 21,               ///< Saline bolus volume maximum has been reached - no more saline allowed
     REQUEST_REJECT_REASON_SALINE_BOLUS_NOT_IN_PROGRESS = 22,            ///< A saline bolus is not in progress
     REQUEST_REJECT_REASON_ACTION_DISABLED_IN_CURRENT_STATE = 23,        ///< Requested user action is disabled in current state