Index: AlarmDefs.h
===================================================================
diff -u
--- AlarmDefs.h	(revision 0)
+++ AlarmDefs.h	(revision 49a9a9032802ce2eb3652b304d5eee38f599ae6e)
@@ -0,0 +1,72 @@
+/**********************************************************************//**
+ *
+ *  Copyright (c) 2020 Diality Inc. - All Rights Reserved.
+ *
+ *  THIS CODE MAY NOT BE COPIED OR REPRODUCED IN ANY FORM, IN PART OR IN
+ *  WHOLE, WITHOUT THE EXPLICIT PERMISSION OF THE COPYRIGHT OWNER.
+ *
+ *  @file AlarmDefs.h
+ *
+ *  @date 22-Nov-2020
+ *  @author S. Nash
+ *
+ *  @brief header file for Alarm Definitions module.
+ *
+ **************************************************************************/
+
+#ifndef __ALARM_DEFINITIONS_H__
+#define __ALARM_DEFINITIONS_H__
+
+// ********** public definitions **********
+
+typedef enum Alarm_List
+{
+    ALARM_ID_NO_ALARM = 0,                                          ///< Indication for when no alarms is a possible situation.
+    ALARM_ID_SOFTWARE_FAULT = 1,                                    ///< Software fault.  Software found itself in an unexpected state.
+    ALARM_ID_STUCK_BUTTON_TEST_FAILED = 2,                          ///< Stuck button POST failure.  Stop or Off button detected to be pressed for at least 1 second during test shortly after power up.
+    ALARM_ID_FPGA_POST_TEST_FAILED = 3,                             ///< FPGA POST failure.
+    ALARM_ID_WATCHDOG_POST_TEST_FAILED = 4,                         ///< Watchdog POST failure.
+    ALARM_ID_UI_COMM_POST_FAILED = 5,                               ///< UI communication POST failure.  UI failed to communicate within a reasonable time after power up.
+    ALARM_ID_BLOOD_PUMP_MC_CURRENT_CHECK = 6,                       ///< Blood pump failed motor controller current check.  Too high when pump should be off or out of range when pump should be running.
+    ALARM_ID_BLOOD_PUMP_MC_SPEED_CHECK = 7,                         ///< Blood pump failed motor controller speed check.
+    ALARM_ID_BLOOD_PUMP_MC_DIRECTION_CHECK = 8,                     ///< Blood pump failed motor controller direction check.
+    ALARM_ID_BLOOD_PUMP_ROTOR_SPEED_CHECK = 9,                      ///< Blood pump failed rotor speed check.  Mismatch with motor and motor controller speeds.
+    ALARM_ID_DIAL_IN_PUMP_MC_CURRENT_CHECK = 10,                    ///< Dialysis inlet pump failed motor controller current check.  Too high when pump should be off or out of range when pump should be running.
+    ALARM_ID_DIAL_IN_PUMP_MC_SPEED_CHECK = 11,                      ///< Dialysis inlet pump failed motor controller speed check.
+    ALARM_ID_DIAL_IN_PUMP_MC_DIRECTION_CHECK = 12,                  ///< Dialysis inlet pump failed motor controller direction check.
+    ALARM_ID_DIAL_IN_PUMP_ROTOR_SPEED_CHECK = 13,                   ///< Dialysis inlet pump failed rotor speed check.  Mismatch with motor and motor controller speeds.
+    ALARM_ID_DIAL_OUT_PUMP_MC_CURRENT_CHECK = 14,                   ///< Dialysis outlet pump failed motor controller current check.  Too high when pump should be off or out of range when pump should be running.
+    ALARM_ID_DIAL_OUT_PUMP_MC_SPEED_CHECK = 15,                     ///< Dialysis outlet pump failed motor controller speed check.
+    ALARM_ID_DIAL_OUT_PUMP_MC_DIRECTION_CHECK = 16,                 ///< Dialysis outlet pump failed motor controller direction check.
+    ALARM_ID_DIAL_OUT_PUMP_ROTOR_SPEED_CHECK = 17,                  ///< Dialysis outlet pump failed rotor speed check.  Mismatch with motor and motor controller speeds.
+    ALARM_ID_WATCHDOG_EXPIRED = 18,                                 ///< Watchdog expired error.  Watchdog was not "pet" within the appropriate time.
+    ALARM_ID_RTC_COMM_ERROR = 19,                                   ///< Real-time clock communication error.
+    ALARM_ID_RTC_CONFIG_ERROR = 20,                                 ///< Real-time clock configuration error.
+    ALARM_ID_DG_COMM_TIMEOUT = 21,                                  ///< Dialysate generator communication timeout.
+    ALARM_ID_UI_COMM_TIMEOUT = 22,                                  ///< User interface communication timeout.
+    ALARM_ID_COMM_TOO_MANY_BAD_CRCS = 23,                           ///< Too many bad CRCs detected on received system messages.
+    ALARM_ID_TREATMENT_STOPPED_BY_USER = 24,                        ///< Treatment stopped by user action - pressed stop button.
+    ALARM_ID_BLOOD_SITTING_WARNING = 25,                            ///< Blood sitting too long warning (>4 min).
+    ALARM_ID_BLOOD_SITTING_TOO_LONG_NO_RESUME = 26,                 ///< Blood sitting too long alarm (>5 min).
+    ALARM_ID_BLOOD_SITTING_TOO_LONG_NO_RINSEBACK = 27,              ///< Blood sitting too long alarm (>10 min).
+    ALARM_ID_CAN_MESSAGE_NOT_ACKED = 28,                            ///< System message that required acknowledgment was not acknowledged.
+    ALARM_ID_OCCLUSION_BLOOD_PUMP = 29,                             ///< Blood pump occlusion detected.
+    ALARM_ID_OCCLUSION_DIAL_IN_PUMP = 30,                           ///< Dialysate inlet pump occlusion detected.
+    ALARM_ID_OCCLUSION_DIAL_OUT_PUMP = 31,                          ///< Dialysate outlet pump occlusion detected.
+    ALARM_ID_ARTERIAL_PRESSURE_LOW = 32,                            ///< Arterial pressure too low during treatment.
+    ALARM_ID_ARTERIAL_PRESSURE_HIGH = 33,                           ///< Arterial pressure too high during treatment.
+    ALARM_ID_VENOUS_PRESSURE_LOW = 34,                              ///< Venous pressure too low during treatment.
+    ALARM_ID_VENOUS_PRESSURE_HIGH = 35,                             ///< Venous pressure too high during treatment.
+    NUM_OF_ALARM_IDS                                                ///< Total # of alarms.
+} ALARM_ID_T;
+
+typedef enum Alarm_Priorities
+{
+    ALARM_PRIORITY_NONE = 0,                                        ///< Indicates not an alarm or no alarms active at this time.
+    ALARM_PRIORITY_LOW = 1,                                         ///< Low priority alarm.
+    ALARM_PRIORITY_MEDIUM = 2,                                      ///< Medium priority alarm.
+    ALARM_PRIORITY_HIGH = 3,                                        ///< High priority alarm.
+    NUM_OF_ALARM_PRIORITIES                                         ///< Total # of alarm priorities.
+} ALARM_PRIORITY_T;
+
+#endif