Index: firmware/App/Controllers/BalancingChamber.c
===================================================================
diff -u -r0bcac6885c8461b05da276fd245b580b7339ddfd -re7e698ed85055dd286e8c0501a582ff66d601590
--- firmware/App/Controllers/BalancingChamber.c	(.../BalancingChamber.c)	(revision 0bcac6885c8461b05da276fd245b580b7339ddfd)
+++ firmware/App/Controllers/BalancingChamber.c	(.../BalancingChamber.c)	(revision e7e698ed85055dd286e8c0501a582ff66d601590)
@@ -107,7 +107,7 @@
 static U32 bcSwitchingBasedOnClosedPeriodCounter;                                               ///< Valve-close segments remaining before first-cycle relaxations clear after Qd timing apply.
 
 //TODO: remove later once level sensor working
-static U32 bicarbChamberPeriodicFillCounter;  
+static U32 bicarbChamberPeriodicFillCounter;
 
 // ********** private function prototypes **********
 
@@ -631,7 +631,7 @@
     freshDialPressure         = getFilteredPressure( D18_PRES );
     spentDialPressure         = getFilteredPressure( D51_PRES );
 
-    if ( getTestConfigStatus( TEST_CONFIG_DD_FP_ENABLE_BETA_1_0_HW ) == TRUE )
+    if ( TRUE == getTestConfigStatus( TEST_CONFIG_DD_FP_ENABLE_BETA_1_0_HW ) )
     {
         //Set Trimmer heater Target temp every BC cycle to catch up fresh dialysate temp
         setHeaterTargetTemperature( D45_HEAT, getFilteredTemperatureValue( D4_TEMP ) );
@@ -945,10 +945,11 @@
         acidVolume        = getF32OverrideValue( &acidDoseVolume );
         bicarbVolume      = getF32OverrideValue( &bicarbDoseVolume );
     }
+
     freshDialPressure         = getFilteredPressure( D18_PRES );
     spentDialPressure         = getFilteredPressure( D51_PRES );
 
-    if ( getTestConfigStatus( TEST_CONFIG_DD_FP_ENABLE_BETA_1_0_HW ) == TRUE )
+    if ( TRUE == getTestConfigStatus( TEST_CONFIG_DD_FP_ENABLE_BETA_1_0_HW ) )
     {
         //Set Trimmer heater Target temp every BC cycle to catch up fresh dialysate temp
         setHeaterTargetTemperature( D45_HEAT, getFilteredTemperatureValue( D4_TEMP ) );
@@ -1218,7 +1219,7 @@
     // Check if a request made was to activate the balancing chamber switching.
     if ( TRUE == isBalChamberSwitchingOnRequested )
     {
-        //Clear the request flag to indicate that the request was processed.
+        //Clear request was processed.
         isBalChamberSwitchingOnRequested = FALSE;
 
         // Set flag to indicate that balancing chamber switching is active