Index: firmware/App/Controllers/BalancingChamber.c
===================================================================
diff -u -r145fd716a856f864f39fb0f9884865f6e45b9256 -r99e330b5b872f68fdf2d842bd0597e54044d9ba9
--- firmware/App/Controllers/BalancingChamber.c	(.../BalancingChamber.c)	(revision 145fd716a856f864f39fb0f9884865f6e45b9256)
+++ firmware/App/Controllers/BalancingChamber.c	(.../BalancingChamber.c)	(revision 99e330b5b872f68fdf2d842bd0597e54044d9ba9)
@@ -108,7 +108,7 @@
 static U32 bcSwitchingBasedOnClosedPeriodCounter;                                               ///< Valve-close segments remaining before first-cycle relaxations clear after Qd timing apply.
 
 //TODO: remove later once level sensor working
-static U32 bicarbChamberPeriodicFillCounter;  
+static U32 bicarbChamberPeriodicFillCounter;
 
 // ********** private function prototypes **********
 
@@ -632,7 +632,7 @@
     freshDialPressure         = getFilteredPressure( D18_PRES );
     spentDialPressure         = getFilteredPressure( D51_PRES );
 
-    if ( getTestConfigStatus( TEST_CONFIG_DD_FP_ENABLE_BETA_1_0_HW ) == TRUE )
+    if ( TRUE == getTestConfigStatus( TEST_CONFIG_DD_FP_ENABLE_BETA_1_0_HW ) )
     {
         //Set Trimmer heater Target temp every BC cycle to catch up fresh dialysate temp
         setHeaterTargetTemperature( D45_HEAT, getFilteredTemperatureValue( D4_TEMP ) );
@@ -946,10 +946,11 @@
         acidVolume        = getF32OverrideValue( &acidDoseVolume );
         bicarbVolume      = getF32OverrideValue( &bicarbDoseVolume );
     }
+
     freshDialPressure         = getFilteredPressure( D18_PRES );
     spentDialPressure         = getFilteredPressure( D51_PRES );
 
-    if ( getTestConfigStatus( TEST_CONFIG_DD_FP_ENABLE_BETA_1_0_HW ) == TRUE )
+    if ( TRUE == getTestConfigStatus( TEST_CONFIG_DD_FP_ENABLE_BETA_1_0_HW ) )
     {
         //Set Trimmer heater Target temp every BC cycle to catch up fresh dialysate temp
         setHeaterTargetTemperature( D45_HEAT, getFilteredTemperatureValue( D4_TEMP ) );
@@ -1219,7 +1220,7 @@
     // Check if a request made was to activate the balancing chamber switching.
     if ( TRUE == isBalChamberSwitchingOnRequested )
     {
-        //Clear the request flag to indicate that the request was processed.
+        //Clear request was processed.
         isBalChamberSwitchingOnRequested = FALSE;
 
         // Set flag to indicate that balancing chamber switching is active