Index: firmware/App/Controllers/BalancingChamber.c
===================================================================
diff -u -rf71cb5f589e0562036b36964ec6bc2258dccc926 -refed432eddd3b47deb44b68088e534ac539b47f6
--- firmware/App/Controllers/BalancingChamber.c	(.../BalancingChamber.c)	(revision f71cb5f589e0562036b36964ec6bc2258dccc926)
+++ firmware/App/Controllers/BalancingChamber.c	(.../BalancingChamber.c)	(revision efed432eddd3b47deb44b68088e534ac539b47f6)
@@ -7,8 +7,8 @@
 *
 * @file    BalancingChamber.c
 *
-* @author  (last)      Shyam Kumar Mathamala
-* @date    (last)      03-Sep-2025
+* @author  (last)      Varshini Nagabooshanam
+* @date    (last)      26-Jan-2026
 *
 * @author  (original)  Vinayakam Mani
 * @date    (original)  28-Jan-2025
@@ -437,7 +437,7 @@
     // Check fresh and spent dialysate pressure in range or BC switch only flag set
     if ( ( ( freshDialPressure >= FRESH_DIAL_PRESSURE_MIN_PSIG ) && ( freshDialPressure <= FRESH_DIAL_PRESSURE_MAX_PSIG ) ) &&
          ( ( spentDialPressure >= SPENT_DIAL_PRESSURE_MIN_PSIG ) && ( spentDialPressure <= SPENT_DIAL_PRESSURE_MAX_PSIG ) ) ||
-         ( TRUE == getBalChamberSwitchingOnlyStatus() ) || ( TRUE == getTestConfigStatus( TEST_CONFIG_DISABLE_BC_PRESSURE_ALARMS ) ) )
+         ( TRUE == getBalChamberSwitchingOnlyStatus() ) || ( TRUE == getTestConfigStatus( TEST_CONFIG_DD_DISABLE_BC_PRESSURE_ALARMS ) ) )
     {
         //Valve control for state 1 fill
         valveControlForBCState1FillStart();
@@ -459,7 +459,7 @@
     }
     else
     {
-        if ( getTestConfigStatus( TEST_CONFIG_DISABLE_BC_PRESSURE_ALARMS ) != TRUE )
+        if ( getTestConfigStatus( TEST_CONFIG_DD_DISABLE_BC_PRESSURE_ALARMS ) != TRUE )
         {
             //Alarm when pressure is not in range
             SET_ALARM_WITH_2_F32_DATA( ALARM_ID_DD_BC_STATE1_FILL_START_PRESSURE_OUT_OF_RANGE, freshDialPressure, spentDialPressure );
@@ -535,7 +535,7 @@
     spentDialPressure = getFilteredPressure( D51_PRES );
 
     // Check fresh and spent dialysate pressure back in range to indicate fill complete.
-    if ( getTestConfigStatus( TEST_CONFIG_DISABLE_BC_PRESSURE_ALARMS ) != TRUE )
+    if ( getTestConfigStatus( TEST_CONFIG_DD_DISABLE_BC_PRESSURE_ALARMS ) != TRUE )
     {
         if ( ( ( freshDialPressure >= FRESH_DIAL_PRESSURE_MIN_PSIG ) && ( freshDialPressure <= FRESH_DIAL_PRESSURE_MAX_PSIG ) ) &&
              ( ( spentDialPressure >= SPENT_DIAL_PRESSURE_MIN_PSIG ) && ( spentDialPressure <= SPENT_DIAL_PRESSURE_MAX_PSIG ) ) )
@@ -591,7 +591,7 @@
 
         if ( TRUE != getBalChamberSwitchingOnlyStatus() )
         {
-            if ( getTestConfigStatus( TEST_CONFIG_DISABLE_BC_PRESSURE_ALARMS ) != TRUE )
+            if ( getTestConfigStatus( TEST_CONFIG_DD_DISABLE_BC_PRESSURE_ALARMS ) != TRUE )
             {
                 if ( ( TRUE != isPressureDroppedDuringFill ) && ( TRUE == isFirstCycleBCSwitchingCompleted ) )
                 {
@@ -651,7 +651,7 @@
     // Check fresh and spent dialysate pressure in range
     if ( ( ( freshDialPressure >= FRESH_DIAL_PRESSURE_MIN_PSIG ) && ( freshDialPressure <= FRESH_DIAL_PRESSURE_MAX_PSIG ) ) &&
          ( ( spentDialPressure >= SPENT_DIAL_PRESSURE_MIN_PSIG ) && ( spentDialPressure <= SPENT_DIAL_PRESSURE_MAX_PSIG ) ) ||
-         ( TRUE == getBalChamberSwitchingOnlyStatus() ) || ( TRUE == getTestConfigStatus( TEST_CONFIG_DISABLE_BC_PRESSURE_ALARMS ) ) )
+         ( TRUE == getBalChamberSwitchingOnlyStatus() ) || ( TRUE == getTestConfigStatus( TEST_CONFIG_DD_DISABLE_BC_PRESSURE_ALARMS ) ) )
     {
         // Valve control for state 2 fill
         valveControlForBCState2FillStart();
@@ -673,7 +673,7 @@
     }
     else
     {
-        if ( getTestConfigStatus( TEST_CONFIG_DISABLE_BC_PRESSURE_ALARMS ) != TRUE )
+        if ( getTestConfigStatus( TEST_CONFIG_DD_DISABLE_BC_PRESSURE_ALARMS ) != TRUE )
         {
             //Alarm when pressure is not in range
             SET_ALARM_WITH_2_F32_DATA( ALARM_ID_DD_BC_STATE2_FILL_START_PRESSURE_OUT_OF_RANGE, freshDialPressure, spentDialPressure );
@@ -698,7 +698,7 @@
     spentDialPressure = getFilteredPressure( D51_PRES );
 
     // Check fresh and spent dialysate pressure back in range to indicate fill complete.
-    if ( getTestConfigStatus( TEST_CONFIG_DISABLE_BC_PRESSURE_ALARMS ) != TRUE )
+    if ( getTestConfigStatus( TEST_CONFIG_DD_DISABLE_BC_PRESSURE_ALARMS ) != TRUE )
     {
         if ( ( ( freshDialPressure >= FRESH_DIAL_PRESSURE_MIN_PSIG ) && ( freshDialPressure <= FRESH_DIAL_PRESSURE_MAX_PSIG ) ) &&
              ( ( spentDialPressure >= SPENT_DIAL_PRESSURE_MIN_PSIG ) && ( spentDialPressure <= SPENT_DIAL_PRESSURE_MAX_PSIG ) ) )
@@ -755,7 +755,7 @@
         // Pressure alarm check
         if ( TRUE != getBalChamberSwitchingOnlyStatus() )
         {
-            if ( getTestConfigStatus( TEST_CONFIG_DISABLE_BC_PRESSURE_ALARMS ) != TRUE )
+            if ( getTestConfigStatus( TEST_CONFIG_DD_DISABLE_BC_PRESSURE_ALARMS ) != TRUE )
             {
                 if ( ( TRUE != isPressureDroppedDuringFill ) && ( TRUE == isFirstCycleBCSwitchingCompleted ) )
                 {