Index: firmware/App/Controllers/DialysatePumps.h
===================================================================
diff -u -rc07917caced76b53a0ed8f35167fac6f9d8310a4 -rb83b525617ddffecc06b81c97e2534cdd3446c47
--- firmware/App/Controllers/DialysatePumps.h	(.../DialysatePumps.h)	(revision c07917caced76b53a0ed8f35167fac6f9d8310a4)
+++ firmware/App/Controllers/DialysatePumps.h	(.../DialysatePumps.h)	(revision b83b525617ddffecc06b81c97e2534cdd3446c47)
@@ -7,8 +7,8 @@
 *
 * @file    DialysatePumps.h
 *
-* @author  (last)      Vinayakam Mani
 * @date    (last)      13-May-2025
+* @date    (last)      13-Nov-2025
 *
 * @author  (original)  Vinayakam Mani
 * @date    (original)  07-Oct-2024
@@ -24,15 +24,15 @@
  *  @defgroup DialysatePumps DialysatePumps
  *  @brief Dialysate Pumps monitor/controller module. Controls and monitors the dialysate pumps.
  *  Dialysate pump manufacturer: Diener Silencer Series Gear Pumps, PN: 01483-PM-3-RA.
- *  The pump shall produce flow rates of 350-2700 ml/min.
+ *  The pump shall run at 200(10%) -2700(90%)RPM.
  *
  *  @addtogroup DialysatePumps
  *  @{
  */
 
 // ********** public definitions **********
 
-#define MIN_DIALYSATE_PUMP_RPM                  350                             ///< Minimum RPM target for dialysate pump (though zero is allowed if turning pump off).
+#define MIN_DIALYSATE_PUMP_RPM                  200                             ///< Minimum RPM target for dialysate pump (though zero is allowed if turning pump off).
 #define MAX_DIALYSATE_PUMP_RPM                  2650                            ///< Maximum RPM target for dialysate pump.
 #define DEGAS_PUMP_TARGET_PRES_ADJ_THRESHOLD    -1.0F                           ///< Dialysate Pump(D12) target pressure threshold adjustment factor.