Index: firmware/App/Controllers/DialysatePumps.h
===================================================================
diff -u -rf6022e86136c821709ce24b61e11e8e2bdf0b11e -r667b74fa0fcd8368f83fc8f8df5166eabea2bf4b
--- firmware/App/Controllers/DialysatePumps.h	(.../DialysatePumps.h)	(revision f6022e86136c821709ce24b61e11e8e2bdf0b11e)
+++ firmware/App/Controllers/DialysatePumps.h	(.../DialysatePumps.h)	(revision 667b74fa0fcd8368f83fc8f8df5166eabea2bf4b)
@@ -24,15 +24,15 @@
  *  @defgroup DialysatePumps DialysatePumps
  *  @brief Dialysate Pumps monitor/controller module. Controls and monitors the dialysate pumps.
  *  Dialysate pump manufacturer: Diener Silencer Series Gear Pumps, PN: 01483-PM-3-RA.
- *  The pump shall produce flow rates of 350-2700 ml/min.
+ *  The pump shall run at 200(10%) -2700(90%)RPM.
  *
  *  @addtogroup DialysatePumps
  *  @{
  */
 
 // ********** public definitions **********
 
-#define MIN_DIALYSATE_PUMP_RPM                  350                             ///< Minimum RPM target for dialysate pump (though zero is allowed if turning pump off).
+#define MIN_DIALYSATE_PUMP_RPM                  200                             ///< Minimum RPM target for dialysate pump (though zero is allowed if turning pump off).
 #define MAX_DIALYSATE_PUMP_RPM                  2650                            ///< Maximum RPM target for dialysate pump.
 #define DEGAS_PUMP_TARGET_PRES_ADJ_THRESHOLD    -1.0F                           ///< Dialysate Pump(D12) target pressure threshold adjustment factor.