Index: firmware/App/Modes/FPModes/StateFlushPermeate.c
===================================================================
diff -u -rf1de0420490d71f85393a1e281bbbbc87a232c64 -r973f790125e70115662d979f5f5631bb9df081f0
--- firmware/App/Modes/FPModes/StateFlushPermeate.c	(.../StateFlushPermeate.c)	(revision f1de0420490d71f85393a1e281bbbbc87a232c64)
+++ firmware/App/Modes/FPModes/StateFlushPermeate.c	(.../StateFlushPermeate.c)	(revision 973f790125e70115662d979f5f5631bb9df081f0)
@@ -8,7 +8,7 @@
 * @file    StateFlushPermeate.c
 *
 * @author  (last)      “rkallala”
-* @date    (last)      20-Jan-2026
+* @date    (last)      29-Jan-2026
 *
 * @author  (original)  “rkallala”
 * @date    (original)  16-Jan-2026
@@ -40,7 +40,7 @@
 #define PERMEATE_FLUSH_DATA_PUBLISH_INTERVAL        ( MS_PER_SECOND / TASK_GENERAL_INTERVAL )   ///< Interval (ms/task time) at which the gen water mode data published.
 #define PERMEATE_FLUSH_TIMEOUT                      ( 2 * SEC_PER_MIN * MS_PER_SECOND )         ///< Permeate flush timer (in ms) timeout for 2 minutes
 #define PERMEATE_FLUSH_ALARM_TIMEOUT                ( 5 * SEC_PER_MIN * MS_PER_SECOND )         ///< Permeate flush alarm timer (in ms) timeout for 5 minutes
-#define PERMEATE_FLUSH_RO_PUMP_TGT_ML               700                                         ///< Pressure target in ml/min for the RO pump during permeate flush.
+#define PERMEATE_FLUSH_RO_PUMP_TGT_ML               800                                         ///< Pressure target in ml/min for the RO pump during permeate flush.
 #define PERMEATE_FLUSH_BOOST_PUMP_TGT_PSI           25                                          ///< Pressure target in PSI for the boost pump during permeate flush.
 #define PERMEATE_FLUSH_CONDUCTIVITY_THRESHOLD       200.0F                                      ///< Conductivity alarm threshold for permeate flush.
 #define MIN_BOOST_PUMP_DUTY_CYCLE_PCT               0.5F                                        ///< Minimum duty cycle value for boost pump during open loop control