Index: firmware/App/Modes/ModeGenDialysate.c
===================================================================
diff -u -r830213bc6dcc1a684610caf78c79d55f2cb41e93 -r8e93a6e39b2c7af5f0b47ef1272a2b53446fab0b
--- firmware/App/Modes/ModeGenDialysate.c	(.../ModeGenDialysate.c)	(revision 830213bc6dcc1a684610caf78c79d55f2cb41e93)
+++ firmware/App/Modes/ModeGenDialysate.c	(.../ModeGenDialysate.c)	(revision 8e93a6e39b2c7af5f0b47ef1272a2b53446fab0b)
@@ -7,8 +7,8 @@
 *
 * @file    ModeGenDialysate.c
 *
-* @author  (last)      Vinayakam Mani
-* @date    (last)      14-Nov-2025
+* @author  (last)      Varshini Nagabooshanam
+* @date    (last)      12-Jan-2026
 *
 * @author  (original)  Vinayakam Mani
 * @date    (original)  06-Nov-2024
@@ -63,6 +63,8 @@
 #define ZERO_DIAL_FLOW_RATE                             0.0F                                        ///< Zero dialysate flow rate
 #define SPENT_CHAMBER_FILL_MAX_COUNT                    10                                          ///< Total number of spent chamber fill allowed.
 #define BICARB_CHAMBER_FILL_TIMEOUT                    ( 1 * MS_PER_SECOND )                        ///< Bicarb chamber fill timeout.
+#define PUMP_SPEED_SLOPE_FACTOR                         1.24F                                       ///< D48 pump speed (calculation based on Qd) slope factor.
+#define PUMP_SPEED_INTERCEPT_FACTOR                     30.0F                                       ///< D48 pump speed (calculation based on Qd) intercept factor.
 //Testing
 #define DELAY_BC_SWITCHING_AT_START_UP          ( 10 * MS_PER_SECOND )                              ///< Provide a balancing chamber switching start up delay to stabilize pump speed etc.,
 /// Payload record structure for Gen dialysate execution state set request
@@ -88,6 +90,7 @@
 static U32 bypassStateDelayStartTimeMS;                                                     ///< Delay balancing chamber switching for a second to preapre pump steady state.
 static BOOL delayBypassStateFlag;                                                           ///< To indicate change in treatment parameters
 static F32 dialysateToDialyzerFlowRate;                                                     ///< Current dialysate to dialyzer flow rate (ml/min)
+static U32 d48PumpSpeed;                                                                    ///< Initial D48 pump speed based on the Qd.
 
 // ********** private function prototypes **********
 
@@ -137,6 +140,7 @@
     bicarbFillStartTimeMS                       = 0;
     pendingSpentChamberFill                     = FALSE;
     pendingBicarbChamberFill                    = FALSE;
+    d48PumpSpeed                                = MIN_DIALYSATE_PUMP_RPM;
     //Testing
     bypassStateDelayStartTimeMS                 = 0;
     delayBypassStateFlag                        = TRUE;
@@ -162,6 +166,7 @@
 {
     initGenDialysateMode();
     setCurrentSubState( NO_SUB_STATE );
+    calculateD48PumpSpeedForBCFill();
     transitionToUltrafiltration();
 
     return genDialysateState;
@@ -230,7 +235,7 @@
             //setDialysatePumpTargetRPM( D12_PUMP, FRESH_DIAL_PUMP_INITIAL_RPM, FALSE );
             setDialysatePumpTargetRPM( D12_PUMP, FRESH_DIAL_PUMP_INITIAL_RPM, TRUE );
             //setDialysatePumpTargetRPM( D48_PUMP, SPENT_DIAL_PUMP_INITIAL_RPM, FALSE );
-            setDialysatePumpTargetRPM( D48_PUMP, SPENT_DIAL_PUMP_INITIAL_RPM, TRUE );
+            setDialysatePumpTargetRPM( D48_PUMP, d48PumpSpeed, TRUE );
 
             //Rinse pump On
             setRinsePumpState( RINSE_PUMP_STATE_ON );
@@ -258,7 +263,7 @@
             //setDialysatePumpTargetRPM( D12_PUMP, FRESH_DIAL_PUMP_INITIAL_RPM, FALSE );
             setDialysatePumpTargetRPM( D12_PUMP, FRESH_DIAL_PUMP_INITIAL_RPM, TRUE );
             //setDialysatePumpTargetRPM( D48_PUMP, SPENT_DIAL_PUMP_INITIAL_RPM, FALSE );
-            setDialysatePumpTargetRPM( D48_PUMP, SPENT_DIAL_PUMP_INITIAL_RPM, TRUE );
+            setDialysatePumpTargetRPM( D48_PUMP, d48PumpSpeed, TRUE );
 
             //Rinse pump On
             setRinsePumpState( RINSE_PUMP_STATE_ON );
@@ -328,7 +333,7 @@
             setRinsePumpState( RINSE_PUMP_STATE_ON );
 
             setDialysatePumpTargetRPM( D12_PUMP, FRESH_DIAL_PUMP_INITIAL_RPM, TRUE );
-            setDialysatePumpTargetRPM( D48_PUMP, SPENT_DIAL_PUMP_INITIAL_RPM, TRUE );
+            setDialysatePumpTargetRPM( D48_PUMP, d48PumpSpeed, TRUE );
             break;
 
         case DD_GEND_DIALYSATE_DELIVERY_PAUSE:
@@ -496,6 +501,31 @@
 
 /*********************************************************************//**
  * @brief
+ * The getD48PumpSpeedForBCFill function returns the calculated D48 pump speed
+ * @details \b Inputs: none
+ * @details \b Outputs: none
+ * @return D48 pump speed.
+ *************************************************************************/
+U32 getD48PumpSpeedForBCFill( void )
+{
+    return d48PumpSpeed;
+}
+
+/*********************************************************************//**
+ * @brief
+ * The setD48PumpSpeedForBCFill function sets the updated D48 pump speed.
+ * @details \b Inputs: none
+ * @details \b Outputs: d48PumpSpeed
+ * @param pumpSpeed Dialysate pump speed
+ * @return none.
+ *************************************************************************/
+void setD48PumpSpeedForBCFill( U32 pumpSpeed )
+{
+    d48PumpSpeed = pumpSpeed;
+}
+
+/*********************************************************************//**
+ * @brief
  * The monitorChamberLevelStatus function checks the spent chamber and bicarb
  * chamber level status and updates the corrosponding flags.
  * @details \b Inputs: Spent and bicarb chamber levels.
@@ -534,7 +564,7 @@
 
     if ( dialFlowrate >= LOW_DIAL_FLOW_RATE )
     {
-        //  linear releationship seen against high dialysate flowrate Vs DeltaTemp
+        //  linear relationship seen against high dialysate flowrate Vs DeltaTemp
         //  deltaTemp = (-0.0029 * Qd) + 3.47
         deltaTemp = ( LINEAR_SLOPE_FACTOR * dialFlowrate ) + LINEAR_INTERCEPT_FACTOR;
     }
@@ -551,6 +581,25 @@
 
 /*********************************************************************//**
  * @brief
+ * The calculateD48PumpSpeedForBCFill function calculates the pump speed based on the
+ * dialysate flow rate for continuous delivery of dialysate.
+ * @details \b Inputs: Qd.
+ * @details \b Outputs: D48 pump speed
+ * @return calculated initial D48 pump speed.
+ *************************************************************************/
+U32 calculateD48PumpSpeedForBCFill( void )
+{
+    // Get the dialysate flow rate from TD
+    F32 dialFlowrate  = getTDDialysateFlowrate();
+
+    // D48 Pump Speed = (1.24 * Qd ) + 30.0
+    d48PumpSpeed = (U32)( ( PUMP_SPEED_SLOPE_FACTOR * dialFlowrate ) +  PUMP_SPEED_INTERCEPT_FACTOR );
+
+    return d48PumpSpeed;
+}
+
+/*********************************************************************//**
+ * @brief
  * The handleGenDDialysateIsolatedUFState function performs the
  * Isolated ultrafiltration operations.
  * @details \b Inputs: none.
@@ -854,6 +903,9 @@
         //TODO: update others parameters setting as needed.
         signalUFRateUpdate();
 
+        //Update D48 pump speed
+        calculateD48PumpSpeedForBCFill();
+
         //reset the flag
         isTreatmentParamUpdated = FALSE;
     }
@@ -1018,12 +1070,6 @@
 
         data.genDialysateExecState              = (U32)getCurrentGenDialysateState();
         data.isDialDelInProgress                = (BOOL)getDialDeliveryProgressStatus();
-        data.d6Level                            = (U32)getLevelStatus( D6_LEVL );
-        data.d63Level                           = (U32)getLevelStatus( D63_LEVL );
-        data.d46Level                           = (U32)getLevelStatus( D46_LEVL );
-        data.d9Pressure                         = getFilteredPressure( D9_PRES );
-        data.d18Pressure                        = getFilteredPressure( D18_PRES );
-        data.d51Pressure                        = getFilteredPressure( D51_PRES );
         data.isDialysateGoodtoDeliver           = (BOOL)getDialGoodToDeliverStatus();
         data.currentQd                          = dialysateToDialyzerFlowRate;