Index: firmware/App/Modes/ModeGenDialysate.c
===================================================================
diff -u -rcceb0bf86fc6ddb1131701844960f59d968988c5 -rcb32846b50cb04e0a68133048325fe81bdc2a3cc
--- firmware/App/Modes/ModeGenDialysate.c	(.../ModeGenDialysate.c)	(revision cceb0bf86fc6ddb1131701844960f59d968988c5)
+++ firmware/App/Modes/ModeGenDialysate.c	(.../ModeGenDialysate.c)	(revision cb32846b50cb04e0a68133048325fe81bdc2a3cc)
@@ -63,15 +63,15 @@
 #define LOW_DIAL_FLOW_RATE                              150.0F                                      ///< Dialysate flow rate lesser than 150 considered to be low Qds.
 #define ZERO_DIAL_FLOW_RATE                             0.0F                                        ///< Zero dialysate flow rate
 #define SPENT_CHAMBER_FILL_MAX_COUNT                    10                                          ///< Total number of spent chamber fill allowed.
-#define BICARB_CHAMBER_FILL_TIMEOUT                    ( 1 * MS_PER_SECOND )                        ///< Bicarb chamber fill timeout.
+#define BICARB_CHAMBER_FILL_TIMEOUT                     ( 1 * MS_PER_SECOND )                       ///< Bicarb chamber fill timeout.
 #define PUMP_SPEED_SLOPE_FACTOR_DIENER_2000             1.24F                                       ///< D48 Diener 2000 pump speed slope (y = 1.24x + 30).
 #define PUMP_SPEED_INTERCEPT_FACTOR_DIENER_2000         30.0F                                       ///< D48 Diener 2000 pump speed intercept.
 #define PUMP_SPEED_SLOPE_FACTOR_DIENER_1000             2.869F                                      ///< D48 Diener 1000 pump speed slope (y = 2.869x + 25.956).
 #define PUMP_SPEED_INTERCEPT_FACTOR_DIENER_1000         25.956F                                     ///< D48 Diener 1000 pump speed intercept.
 #define BICARB_CHAMBER_FILL_TIMEOUT                     ( 1 * MS_PER_SECOND )                       ///< Bicarb chamber fill timeout.
 
 //Testing
-#define DELAY_BC_SWITCHING_AT_START_UP          ( 10 * MS_PER_SECOND )                              ///< Provide a balancing chamber switching start up delay to stabilize pump speed etc.,
+#define DELAY_BC_SWITCHING_AT_START_UP                  ( 10 * MS_PER_SECOND )                      ///< Provide a balancing chamber switching start up delay to stabilize pump speed etc.,
 /// Payload record structure for Gen dialysate execution state set request
 typedef struct
 {