Index: firmware/App/Modes/ModePreGenDialysate.c
===================================================================
diff -u -r1a258edd45a2bca2fbbff23a5480493f0ab3f10e -r604c63782c972bef41038d2d0eaaa282595d3599
--- firmware/App/Modes/ModePreGenDialysate.c	(.../ModePreGenDialysate.c)	(revision 1a258edd45a2bca2fbbff23a5480493f0ab3f10e)
+++ firmware/App/Modes/ModePreGenDialysate.c	(.../ModePreGenDialysate.c)	(revision 604c63782c972bef41038d2d0eaaa282595d3599)
@@ -300,15 +300,20 @@
     DD_PRE_GEN_DIALYSATE_STATE_T state  = DD_PRE_GEN_WAIT_FOR_FP_GEN;
     FP_OP_MODE_T fpMode = getCurrentFPOperationMode();
 
-    if ( TRUE == getTestConfigStatus( TEST_CONFIG_DD_RUN_SOLO ) )
+    // Start FP Pre-Generate Permeate
+    if ( ( FP_MODE_STAN == fpMode ))
     {
+        signalStartGenPermeate();
+    }
+
+    else if ( TRUE == getTestConfigStatus( TEST_CONFIG_DD_RUN_SOLO ) )
+    {
         state = DD_PRE_GEN_DIALYSATE_HYD_CHAMBER_FILL_CHECK;
     }
 
     else if ( ( FP_MODE_DEGP  == fpMode ) || ( FP_MODE_GENP  == fpMode ) )
     {
         state = DD_PRE_GEN_DIALYSATE_HYD_CHAMBER_FILL_CHECK;
-
     }
 
     //TODO: Should DD keep a timer and Alarm if FP never transitions?
@@ -368,12 +373,12 @@
 
         if ( d18Diff > PRE_GEN_HYDRO_RECIRC_PRESSURE_TOLERANCE )
         {
-            SET_ALARM_WITH_2_U32_DATA( ALARM_ID_DD_PRE_GEN_D18_PRESSURE, d18Pres, d18Diff )
+            SET_ALARM_WITH_2_F32_DATA( ALARM_ID_DD_PRE_GEN_D18_PRESSURE, d18Pres, d18Diff )
         }
 
         if ( d9Diff > PRE_GEN_HYDRO_RECIRC_PRESSURE_TOLERANCE )
         {
-            SET_ALARM_WITH_2_U32_DATA( ALARM_ID_DD_PRE_GEN_D9_PRESSURE, d9Pres, d9Diff )
+            SET_ALARM_WITH_2_F32_DATA( ALARM_ID_DD_PRE_GEN_D9_PRESSURE, d9Pres, d9Diff )
         }
 
         if ( TRUE == getTestConfigStatus( TEST_CONFIG_DD_DISABLE_DRY_BICARB ) )