Index: firmware/App/Controllers/RinsePump.c
===================================================================
diff -u -r8348015aa77e1ee2c4c20e9f8e2c45b59bcf3f17 -r0253afcc2b02def4d57a4a21a20a9b3a6fe65f22
--- firmware/App/Controllers/RinsePump.c	(.../RinsePump.c)	(revision 8348015aa77e1ee2c4c20e9f8e2c45b59bcf3f17)
+++ firmware/App/Controllers/RinsePump.c	(.../RinsePump.c)	(revision 0253afcc2b02def4d57a4a21a20a9b3a6fe65f22)
@@ -7,8 +7,8 @@
 *
 * @file    RinsePump.c
 *
-* @author  (last)      Vinayakam Mani
-* @date    (last)      14-Apr-2026
+* @author  (last)      Raghu Kallala
+* @date    (last)      19-May-2026
 *
 * @author  (original)  Vinayakam Mani
 * @date    (original)  02-Oct-2025
@@ -66,7 +66,7 @@
 static RINSE_PUMP_STATE_T handleRinsePumpOnState ( void );
 static void monitorRinsePumpSpeed( void );
 static void publishRinsePumpData( void );
-static void setRinsePumpPwmCount( RINSE_PUMP_ID_T pumpId, U32 pwmCount );
+static void setRinsePumpPwm( RINSE_PUMP_ID_T pumpId, F32 pwmPercent );
 
 /*********************************************************************//**
  * @brief
@@ -277,8 +277,13 @@
 
     if ( TRUE == getTestConfigStatus( TEST_CONFIG_DD_FP_ENABLE_BETA_2_0_HW ) )
     {
-        // Set PWM count zero to stop the logical rinse pump
-        setRinsePumpPwmCount( D79_RINSE_PUMP, RINSE_PUMP_OFF_COUNT );
+        F32 pwmPercent;
+
+        // Set PWM to zero to stop the logical rinse pump
+        rinsePumpPwmPercentage.data = 0.0F;
+        // PWM should be zero. Ignore the override value for rinsePumpPwmPercentage if any.
+        pwmPercent = rinsePumpPwmPercentage.data;
+        setRinsePumpPwm( D79_RINSE_PUMP, pwmPercent );
     }
     else
     {
@@ -302,13 +307,13 @@
 
     if ( TRUE == getTestConfigStatus( TEST_CONFIG_DD_FP_ENABLE_BETA_2_0_HW ) )
     {
-        F32 pwmPercent   = getF32OverrideValue( &rinsePumpPwmPercentage );     // TODO should this conversion happen in setPWMCount function?
-        U32 pwmInCount   = (U32)( ( pwmPercent / RINSE_PUMP_MAX_PWM_PERCENT ) * RINSE_PUMP_PWM_IN_COUNT_MAX );
+        F32 pwmPercent;
 
-        rinsePumpTargetSpeedRPM = (U32)( ( (F32)pwmInCount / RINSE_PUMP_PWM_IN_COUNT_MAX ) * (F32)RINSE_PUMP_MAX_RPM_ESTIMATE );
+        rinsePumpPwmPercentage.data = RINSE_PUMP_DEFAULT_PWM_PERCENT;
+        pwmPercent   = getF32OverrideValue( &rinsePumpPwmPercentage );
 
         // Turn on logical rinse pump with given PWM value
-        setRinsePumpPwmCount( D79_RINSE_PUMP, (U32)pwmInCount );
+        setRinsePumpPwm( D79_RINSE_PUMP, pwmPercent );
     }
     else
     {
@@ -321,20 +326,24 @@
 
 /*********************************************************************//**
  * @brief
- * The setRinsePumpPwmCount function maps a logical rinse pump ID to the
- * underlying FPGA control and applies the requested PWM count.
- * @details \b Inputs: pumpId, pwmCount
+ * The setRinsePumpPwm function maps a logical rinse pump ID to the
+ * underlying FPGA control and applies the requested PWM.
+ * @details \b Inputs: pumpId, pwmPercent
  * @details \b Outputs: FPGA rinse pump control register
  * @param pumpId Logical rinse pump identifier
  * @param pwmCount PWM magnitude (0..RINSE_PUMP_PWM_IN_COUNT_MAX)
  * @return none
  *************************************************************************/
-static void setRinsePumpPwmCount( RINSE_PUMP_ID_T pumpId, U32 pwmCount )
+static void setRinsePumpPwm( RINSE_PUMP_ID_T pumpId, F32 pwmPercent )
 {
+    U08 pwmCount = (U08)( ( pwmPercent / RINSE_PUMP_MAX_PWM_PERCENT ) * RINSE_PUMP_PWM_IN_COUNT_MAX );
+
+    rinsePumpTargetSpeedRPM = (U32)( ( (F32)pwmCount / RINSE_PUMP_PWM_IN_COUNT_MAX ) * (F32)RINSE_PUMP_MAX_RPM_ESTIMATE );
+
     switch ( pumpId )
     {
         case D79_RINSE_PUMP:
-            setFPGAD79RinsePumpPWMControl( (U08)pwmCount );
+            setFPGAD79RinsePumpPWMControl( pwmCount );
             break;
 
         default:
@@ -359,7 +368,7 @@
         RINSE_PUMP_PAYLOAD_T data;
 
         data.d79State   = getRinsePumpState();
-        data.d79PumpPWM = getF32OverrideValue( &rinsePumpPwmPercentage );
+        data.d79PumpPWM = ( getRinsePumpState() == RINSE_PUMP_STATE_OFF ? 0.0F : getF32OverrideValue( &rinsePumpPwmPercentage ) );
         data.d79PumpRPM = rinsePumpMeasuredSpeed;
 
         broadcastData( MSG_ID_DD_RINSE_PUMP_DATA, COMM_BUFFER_OUT_CAN_DD_BROADCAST, (U08*)&data, sizeof( RINSE_PUMP_PAYLOAD_T ) );
Index: firmware/App/DDCommon.h
===================================================================
diff -u -r4efb1705bf036fff357b41566028823a01d5d6d0 -r0253afcc2b02def4d57a4a21a20a9b3a6fe65f22
--- firmware/App/DDCommon.h	(.../DDCommon.h)	(revision 4efb1705bf036fff357b41566028823a01d5d6d0)
+++ firmware/App/DDCommon.h	(.../DDCommon.h)	(revision 0253afcc2b02def4d57a4a21a20a9b3a6fe65f22)
@@ -39,8 +39,8 @@
 //Uncomment below if barometric pressure sensor reading available
 //#define __BARO_PRES_SENSOR__      1
 
-//Uncomment below if required hardware available ( baro and cond sensor) for testing
-//#define ENABLE_ALARM_1
+//Uncomment below to disable the communication to dialin for blood leak embedded mode
+//#define __BLOOD_LEAK_EMB_MODE_RESPONSE_DISABLED__   1
 
 //Uncomment below once characterization/study completed
 //#define ENABLE_ALARM_2
@@ -53,10 +53,20 @@
 
 //Uncomment below to disable revised heater model
 #define __REVISED_HEATER_MODEL__   1
+
 // comment below to disable bicarb multi level sensor for time based chamber F fill
 #define CONDUCTIVE_LEVEL_SENSOR_ENABLED  1
 
+//Uncomment below to disable d30 heater alarm(as all units are not equipped with d30 temp sensor)
+//#define __D30_TEMPERATURE_DISABLED__
 
+//Uncomment below to disable the DD too-many-bad-message-CRCs alarm.
+//#define __BAD_MSG_CRC_ALARM_DISABLED__    1
+
+//Uncomment below to disable the conductivity sensor alarms
+//#define __CONDUCTIVITY_SENSOR_ALARMS_DISABLED__
+
+
     #include <stdio.h>
     #include <strings.h>
 #endif