Index: firmware/App/Modes/FPModes/ModeGenPermeate.c
===================================================================
diff -u -r47a7b0fce13cf38919932a8662c378f4f6a8b9f3 -rdfa0c83c8e4c159ba143fdcbc1e5e351d30e4219
--- firmware/App/Modes/FPModes/ModeGenPermeate.c	(.../ModeGenPermeate.c)	(revision 47a7b0fce13cf38919932a8662c378f4f6a8b9f3)
+++ firmware/App/Modes/FPModes/ModeGenPermeate.c	(.../ModeGenPermeate.c)	(revision dfa0c83c8e4c159ba143fdcbc1e5e351d30e4219)
@@ -43,7 +43,7 @@
 
 #define PRE_GEN_PERMEATE_DATA_PUBLISH_INTERVAL       ( MS_PER_SECOND / TASK_GENERAL_INTERVAL )    ///< Interval (ms/task time) at which the gen permeate mode data published.
 #define GEN_PERMEATE_BOOST_PUMP_TGT_PSI              25.0F                                        ///< Pressure target in PSI for the boost pump during generate permeate mode.
-#define GEN_PERMEATE_RO_PUMP_TGT_ML                  750                                          ///< Flow target in ml/min for the ro pump during generate permeate mode.
+#define GEN_PERMEATE_RO_PUMP_TGT_ML                  800                                          ///< Flow target in ml/min for the ro pump during generate permeate mode.
 #define PUMP_REST_TIMEOUT_MS                         ( 3 * MS_PER_SECOND )                        ///< Duraion for open loop control at the start of tank fill/full state ( in ms )
 #define RO_REJECTION_WAIT_TIME_MS                    ( 8 * MS_PER_SECOND )                        ///< RO rejection alarm wait time. 5 seconds for RR to stabilize and 3 seconds for calculating rolling average ( in ms )
 #define MIN_SAMPLES_NEEDED_FOR_DUTY_CYCLE_AVG        10                                           ///< Minimum number for samples needed for calculating the average duty cycle
Index: firmware/App/Modes/FPModes/ModePreGenPermeate.c
===================================================================
diff -u -r937362196a40d7d55b1b61e33f88c382184fbf2f -rdfa0c83c8e4c159ba143fdcbc1e5e351d30e4219
--- firmware/App/Modes/FPModes/ModePreGenPermeate.c	(.../ModePreGenPermeate.c)	(revision 937362196a40d7d55b1b61e33f88c382184fbf2f)
+++ firmware/App/Modes/FPModes/ModePreGenPermeate.c	(.../ModePreGenPermeate.c)	(revision dfa0c83c8e4c159ba143fdcbc1e5e351d30e4219)
@@ -41,7 +41,7 @@
 // ********** private definitions **********
 
 #define PRE_GENP_DATA_PUBLISH_INTERVAL     ( MS_PER_SECOND / TASK_GENERAL_INTERVAL )    ///< Interval (ms/task time) at which the pre gen Permeate mode data published.
-#define VERIFY_WATER_RO_PUMP_TGT_FLOW_ML   750                                          ///< Target flow rate for RO pump in ml/min
+#define VERIFY_WATER_RO_PUMP_TGT_FLOW_ML   800                                          ///< Target flow rate for RO pump in ml/min
 #define VERIFY_WATER_BOOST_PUMP_TGT_PSI    25                                           ///< Target pressure for boost pump in psi.
 #define VERIFY_WATER_TIMEOUT_MS            ( 30 * MS_PER_SECOND )                       ///< Verify Water timer ( in ms )
 #define FLOW_CONTROL_STABLIZED_TIMEOUT_MS  ( 25 * MS_PER_SECOND )                       ///< Flow control stablized time ( in ms )
Index: firmware/App/Modes/FPModes/StateFlushPermeate.c
===================================================================
diff -u -rf1de0420490d71f85393a1e281bbbbc87a232c64 -rdfa0c83c8e4c159ba143fdcbc1e5e351d30e4219
--- firmware/App/Modes/FPModes/StateFlushPermeate.c	(.../StateFlushPermeate.c)	(revision f1de0420490d71f85393a1e281bbbbc87a232c64)
+++ firmware/App/Modes/FPModes/StateFlushPermeate.c	(.../StateFlushPermeate.c)	(revision dfa0c83c8e4c159ba143fdcbc1e5e351d30e4219)
@@ -40,7 +40,7 @@
 #define PERMEATE_FLUSH_DATA_PUBLISH_INTERVAL        ( MS_PER_SECOND / TASK_GENERAL_INTERVAL )   ///< Interval (ms/task time) at which the gen water mode data published.
 #define PERMEATE_FLUSH_TIMEOUT                      ( 2 * SEC_PER_MIN * MS_PER_SECOND )         ///< Permeate flush timer (in ms) timeout for 2 minutes
 #define PERMEATE_FLUSH_ALARM_TIMEOUT                ( 5 * SEC_PER_MIN * MS_PER_SECOND )         ///< Permeate flush alarm timer (in ms) timeout for 5 minutes
-#define PERMEATE_FLUSH_RO_PUMP_TGT_ML               700                                         ///< Pressure target in ml/min for the RO pump during permeate flush.
+#define PERMEATE_FLUSH_RO_PUMP_TGT_ML               800                                         ///< Pressure target in ml/min for the RO pump during permeate flush.
 #define PERMEATE_FLUSH_BOOST_PUMP_TGT_PSI           25                                          ///< Pressure target in PSI for the boost pump during permeate flush.
 #define PERMEATE_FLUSH_CONDUCTIVITY_THRESHOLD       200.0F                                      ///< Conductivity alarm threshold for permeate flush.
 #define MIN_BOOST_PUMP_DUTY_CYCLE_PCT               0.5F                                        ///< Minimum duty cycle value for boost pump during open loop control