Index: firmware/App/Monitors/Temperature.c
===================================================================
diff -u -ra0775d72daf9fcbb53ad4b8629e9752ba9bf1ae9 -rdfe2f0df5623aaea1aebdbf22a512fb919abdf01
--- firmware/App/Monitors/Temperature.c	(.../Temperature.c)	(revision a0775d72daf9fcbb53ad4b8629e9752ba9bf1ae9)
+++ firmware/App/Monitors/Temperature.c	(.../Temperature.c)	(revision dfe2f0df5623aaea1aebdbf22a512fb919abdf01)
@@ -16,11 +16,6 @@
 ***************************************************************************/
 
 #include "BalancingChamber.h"
-#ifdef __TEENSY_CONDUCTIVITY_DRIVER__
-#include "ConductivityTeensy.h"
-#else
-#include "ConductivitySensors.h"
-#endif
 #include "Conductivity.h"
 #include "Flow.h"
 #include "Messaging.h"
@@ -379,6 +374,8 @@
 {
     DIAL_TEMPERATURE_SENSORS_T i;
     F32 temperatureC = 0.0F;
+    U32 currentIndex = 0;
+    F32 prevSampleToRemoveC = 0.0f;
 
     for ( i = DIAL_TEMP_FIRST; i < NUM_OF_DIAL_TEMPS; i++ )
     {
@@ -391,22 +388,18 @@
         {
             CONDUCTIVITY_SENSORS_T sensor = ( DIAL_TEMP_D28 == i ? D27_COND : D29_COND );
 
-#ifdef __TEENSY_CONDUCTIVITY_DRIVER__
-
-            if (sensor != D74_COND)
+            if ( getTestConfigStatus( TEST_CONFIG_DD_FP_ENABLE_BETA_2_0_HW ) != TRUE )
             {
                 temperatureC = getTeensyConductivityTemperatureValue( sensor );
             }
             else
             {
-                temperatureC = getConductivityTemperatureValue( sensor );
+                temperatureC = getConductivityTemperature( sensor );
             }
-#else
-            temperatureC = getConductivityTemperatureValue( sensor );
-#endif
-            U32 currentIndex             = dialTempMovingAvgData[ i ].dialTempSamplesNextIndex;
-            F32 prevSampleToRemoveC      = dialTempMovingAvgData[ i ].dialTempSamplesC[ currentIndex ];
 
+            currentIndex = dialTempMovingAvgData[ i ].dialTempSamplesNextIndex;
+            prevSampleToRemoveC = dialTempMovingAvgData[ i ].dialTempSamplesC[ currentIndex ];
+
             dialTempMovingAvgData[ i ].dialTempDataColStartTimeMS       = getMSTimerCount();
             dialTempMovingAvgData[ i ].dialTempColHasTimerBeenSet       = TRUE;
             dialTempMovingAvgData[ i ].dialTempSamplesC[ currentIndex ] = temperatureC;
@@ -534,19 +527,24 @@
         data.d50Temp        = getTemperatureValue( D50_TEMP );
         data.d99Temp        = getTemperatureValue( D99_TEMP );
         data.boardTemp      = getTemperatureValue( BRD_TEMP );
-#ifdef __TEENSY_CONDUCTIVITY_DRIVER__
-        data.d16CondTemp    = getTeensyConductivityTemperatureValue( D17_COND );
-        data.d28CondTemp    = getTeensyConductivityTemperatureValue( D27_COND );
-        data.d30CondTemp    = getTeensyConductivityTemperatureValue( D29_COND );
-        data.d44CondTemp    = getTeensyConductivityTemperatureValue( D43_COND );
-        data.d75CondTemp    = getConductivityTemperatureValue( D74_COND );
-#else
-        data.d16CondTemp    = getConductivityTemperatureValue( D17_COND );
-        data.d28CondTemp    = getConductivityTemperatureValue( D27_COND );
-        data.d30CondTemp    = getConductivityTemperatureValue( D29_COND );
-        data.d44CondTemp    = getConductivityTemperatureValue( D43_COND );
-        data.d75CondTemp    = getConductivityTemperatureValue( D74_COND );
-#endif
+
+        if ( getTestConfigStatus( TEST_CONFIG_DD_FP_ENABLE_BETA_2_0_HW ) != TRUE )
+        {
+            data.d16CondTemp    = getTeensyConductivityTemperatureValue( D17_COND );
+            data.d28CondTemp    = getTeensyConductivityTemperatureValue( D27_COND );
+            data.d30CondTemp    = getTeensyConductivityTemperatureValue( D29_COND );
+            data.d44CondTemp    = getTeensyConductivityTemperatureValue( D43_COND );
+            data.d75CondTemp    = getTeensyConductivityTemperatureValue( D74_COND );
+        }
+        else
+        {
+            data.d16CondTemp    = getConductivityTemperature( D17_COND );
+            data.d28CondTemp    = getConductivityTemperature( D27_COND );
+            data.d30CondTemp    = getConductivityTemperature( D29_COND );
+            data.d44CondTemp    = getConductivityTemperature( D43_COND );
+            data.d75CondTemp    = getConductivityTemperature( D74_COND );
+        }
+
         data.d4AvgTemp      = getD4AverageTemperature();
         data.d50AvgTemp     = getD50AverageTemperature();
         data.d99AvgTemp     = getD99AverageTemperature();
Index: firmware/App/Services/Messaging.c
===================================================================
diff -u -r48558494898419baa0697009318fb543fe0b8a46 -rdfe2f0df5623aaea1aebdbf22a512fb919abdf01
--- firmware/App/Services/Messaging.c	(.../Messaging.c)	(revision 48558494898419baa0697009318fb543fe0b8a46)
+++ firmware/App/Services/Messaging.c	(.../Messaging.c)	(revision dfe2f0df5623aaea1aebdbf22a512fb919abdf01)
@@ -129,28 +129,21 @@
     { MSG_ID_DD_PRESSURE_SENSOR_PUBLISH_INTERVAL_OVERRIDE_REQUEST,                  &testDDPressureSensorDataPublishIntervalOverride },
     { MSG_ID_DD_PRESSURE_SENSOR_FILTER_READINGS_OVERRIDE_REQUEST,                   &testDDPressureSensorFilteredReadingsOverride },
     { MSG_ID_DD_PRESSURE_SENSOR_FILTER_TEMPERATURE_OVERRIDE_REQUEST,                &testDDPressureSensorFilteredTemperatureReadingsOverride },
-#ifdef __TEENSY_CONDUCTIVITY_DRIVER__
+
     { MSG_ID_DD_CONDUCTIVITY_SENSOR_PUBLISH_INTERVAL_OVERRIDE_REQUEST,              &testDDConductivitySensorDataPublishIntervalOverride },
     { MSG_ID_FP_CONDUCTIVITY_PUBLISH_INTERVAL_OVERRIDE_REQUEST,                     &testFPConductivitySensorDataPublishIntervalOverride },
+    { MSG_ID_DD_CONDUCTIVITY_SENSOR_READINGS_OVERRIDE_REQUEST,                      &testConductivitySensorReadingsOverride },
+    { MSG_ID_DD_CONDUCTIVITY_SENSOR_TEMPERATURE_OVERRIDE_REQUEST,                   &testConductivitySensorTemperatureOverride },
+    { MSG_ID_FP_CONDUCTIVITY_SENSOR_READINGS_OVERRIDE_REQUEST,                      &testConductivitySensorReadingsOverride },
+    { MSG_ID_FP_CONDUCTIVITY_SENSOR_TEMPERATURE_OVERRIDE_REQUEST,                   &testConductivitySensorTemperatureOverride },
     { MSG_ID_DD_SET_CONDUCTIVITY_MODEL_REQUEST,                                     &testSetTeenyConductivityModel },
-    { MSG_ID_DD_CONDUCTIVITY_SENSOR_READINGS_OVERRIDE_REQUEST,                      &testTeensyConductivitySensorReadingsOverride },
-    { MSG_ID_DD_CONDUCTIVITY_SENSOR_TEMPERATURE_OVERRIDE_REQUEST,                   &testTeensyConductivitySensorTemperatureReadingsOverride },
     { MSG_ID_DD_CONDUCTIVITY_SENSOR_RESISTANCE_OVERRIDE_REQUEST,                    &testTeensyConductivitySensorResistanceReadingsOverride },
-    { MSG_ID_FP_CONDUCTIVITY_OVERRIDE_REQUEST,                                      &testTeensyConductivitySensorReadingsOverride },
-    { MSG_ID_FP_CONDUCTIVITY_TEMP_OVERRIDE_REQUEST,                                 &testTeensyConductivitySensorTemperatureReadingsOverride },
     { MSG_ID_FP_CONDUCTIVITY_SENSOR_RESISTANCE_OVERRIDE_REQUEST,                    &testTeensyConductivitySensorResistanceReadingsOverride },
-#else
-    { MSG_ID_DD_CONDUCTIVITY_SENSOR_READINGS_OVERRIDE_REQUEST,                      &testDDConductivitySensorReadingsOverride },
-    { MSG_ID_DD_CONDUCTIVITY_SENSOR_TEMPERATURE_OVERRIDE_REQUEST,                   &testDDConductivitySensorTemperatureReadingsOverride },
-    { MSG_ID_DD_CONDUCTIVITY_SENSOR_READ_COUNTER_OVERRIDE_REQUEST,                  &testDDConductivitySensorReadCounterOverride },
-    { MSG_ID_DD_CONDUCTIVITY_SENSOR_ERROR_COUNTER_OVERRIDE_REQUEST,                 &testDDConductivitySensorErrorCounterOverride },
-    { MSG_ID_DD_CONDUCTIVITY_SENSOR_PUBLISH_INTERVAL_OVERRIDE_REQUEST,              &testDDConductivitySensorDataPublishIntervalOverride },
-    { MSG_ID_FP_CONDUCTIVITY_PUBLISH_INTERVAL_OVERRIDE_REQUEST,                     &testFPConductivitySensorDataPublishIntervalOverride },
-    { MSG_ID_FP_CONDUCTIVITY_OVERRIDE_REQUEST,                                      &testFPConductivitySensorReadingsOverride },
-    { MSG_ID_FP_CONDUCTIVITY_TEMP_OVERRIDE_REQUEST,                                 &testFPConductivitySensorTemperatureReadingsOverride },
-    { MSG_ID_FP_CONDUCTIVITY_READ_COUNT_OVERRIDE_REQUEST,                           &testFPConductivitySensorReadCounterOverride },
-    { MSG_ID_FP_CONDUCTIVITY_ERROR_COUNT_OVERRIDE_REQUEST,                          &testFPConductivitySensorErrorCounterOverride },
-#endif
+    { MSG_ID_DD_CONDUCTIVITY_SENSOR_CONDUCTIVITY_READ_COUNTER_OVERRIDE_REQUEST,     &testConductivitySensorConductivityReadCounterOverride },
+    { MSG_ID_DD_CONDUCTIVITY_SENSOR_CONDUCTIVITY_ERROR_COUNTER_OVERRIDE_REQUEST,    &testConductivitySensorConductivityErrorCounterOverride },
+    { MSG_ID_FP_CONDUCTIVITY_SENSOR_CONDUCTIVITY_READ_COUNT_OVERRIDE_REQUEST,       &testConductivitySensorConductivityReadCounterOverride },
+    { MSG_ID_FP_CONDUCTIVITY_SENSOR_CONDUCTIVITY_ERROR_COUNT_OVERRIDE_REQUEST,      &testConductivitySensorConductivityErrorCounterOverride },
+
     { MSG_ID_DD_CONCENTRATE_PUMP_PUBLISH_INTERVAL_OVERRIDE_REQUEST,                 &testConcentratePumpDataPublishIntervalOverride },
     { MSG_ID_DD_CONCENTRATE_PUMP_TARGET_SPEED_OVERRIDE_REQUEST,                     &testConcentratePumpTargetSpeedOverride },
     { MSG_ID_DD_CONCENTRATE_PUMP_MEASURED_SPEED_OVERRIDE_REQUEST,                   &testConcentratePumpMeasuredSpeedOverride },
@@ -284,6 +277,7 @@
     { MSG_ID_FP_DEF_PRE_GEN_PUBLISH_INTERVAL_OVERRIDE_REQUEST,                      &testPreGenPermeateDefDataPublishIntervalOverride},
     { MSG_ID_FP_DEF_GEN_PUBLISH_INTERVAL_OVERRIDE_REQUEST,                          &testGenPermeateDefDataPublishIntervalOverride},
     { MSG_ID_FP_DEF_STATUS_REQUEST,                                                 &testGetFPDefeaturedStatus },
+    { MSG_ID_FP_RO_FILTERED_REJECTION_RATIO_OVERRIDE_REQUEST,                       &testRORejectionRatioFilteredOverride },
 };
 
 /// Calculation for number of entries in the incoming message function handler look-up table.
@@ -576,7 +570,7 @@
  * @param alarm ID of alarm triggered
  * @param almData1 1st data associated with alarm
  * @param almData2 2nd data associated with alarm
- * @return TRUE if msg successfully queued for transmit, FALSE if not
+ * @return TRUE if msg successfully queued for transmit, FALSE if not.
  *************************************************************************/
 BOOL broadcastAlarmTriggered( U32 alarm, ALARM_DATA_T almData1, ALARM_DATA_T almData2, ALARM_SOURCE_T almSource )
 {