Index: firmware/App/Controllers/Heaters.c
===================================================================
diff -u -r60ec2f1256b02ee0a6d4346877494ce1bda55ab2 -rf215311725c002c9b9f2915e3502b89ae6a93c91
--- firmware/App/Controllers/Heaters.c	(.../Heaters.c)	(revision 60ec2f1256b02ee0a6d4346877494ce1bda55ab2)
+++ firmware/App/Controllers/Heaters.c	(.../Heaters.c)	(revision f215311725c002c9b9f2915e3502b89ae6a93c91)
@@ -187,6 +187,7 @@
 {
     if( heater < NUM_OF_DG_HEATERS )
     {
+#ifndef DISABLE_HEATERS_AND_TEMPS
         // Assume the target temperature has not changed
         heatersStatus[ heater ].hasTargetTempChanged = FALSE;
 
@@ -197,6 +198,7 @@
             heatersStatus[ heater ].hasTargetTempChanged = TRUE;
             // TODO alarm if temperature if out of range or just reject?
         }
+#endif
     }
     else
     {
@@ -228,13 +230,16 @@
 {
     BOOL status = FALSE;
 
+
     if( heater < NUM_OF_DG_HEATERS )
     {
+#ifndef DISABLE_HEATERS_AND_TEMPS
         if ( TRUE == heatersStatus[ heater ].hasTargetTempChanged )
         {
             status = TRUE;
             heatersStatus[ heater ].startHeaterSignal = TRUE;
         }
+#endif
     }
     else
     {
@@ -327,9 +332,11 @@
 
     if ( TRUE == heaterCmdPtr->startHeater )
     {
+#ifndef DISABLE_TRIMMER_HEATER
         if ( ( MINIMUM_TARGET_TEMPERATURE <= heaterCmdPtr->targetTemp ) && ( heaterCmdPtr->targetTemp <= MAXIMUM_TARGET_TEMPERATURE ) )
         {
             cmdResponse.rejected = FALSE;
+
     #ifndef DISABLE_HEATERS_AND_TEMPS
             heatersStatus[ DG_TRIMMER_HEATER ].targetTemp        = heaterCmdPtr->targetTemp;
             heatersStatus[ DG_TRIMMER_HEATER ].startHeaterSignal = TRUE;
@@ -339,6 +346,7 @@
         {
             cmdResponse.rejectCode = DG_CMD_REQUEST_REJECT_REASON_INVALID_PARAMETER;
         }
+#endif
     }
     else
     {
@@ -361,7 +369,7 @@
  *************************************************************************/
 void execHeatersMonitor( void )
 {
-    /*DG_HEATERS_T heater;
+    DG_HEATERS_T heater;
 
 #ifndef IGNORE_HEATERS_MONITOR
     checkPrimaryHeaterTempSensors();
@@ -404,7 +412,7 @@
                 heatersStatus[ heater ].heaterOnWithNoFlowTimer = getMSTimerCount();
             }
         }
-    }*/
+    }
 
     // TODO un-comment the heaters voltage
     //monitorHeatersVoltage();
@@ -756,12 +764,12 @@
     if ( trimmerHeaterInternalTemp > HEATERS_MAX_ALLOWED_INTERNAL_TEMPERATURE_C )
     {
         isTempOut = TRUE;
-        SET_ALARM_WITH_1_U32_DATA( ALARM_ID_DG_TRIMMER_HEATER_INTERNAL_TEMP_OUT_OF_RANGE, trimmerHeaterInternalTemp );
+        //SET_ALARM_WITH_1_U32_DATA( ALARM_ID_DG_TRIMMER_HEATER_INTERNAL_TEMP_OUT_OF_RANGE, trimmerHeaterInternalTemp );
     }
     else if ( trimmerHeaterColdJunctionTemp > HEATERS_MAX_ALLOWED_COLD_JUNCTION_TEMPERATURE_C )
     {
         isTempOut = TRUE;
-        SET_ALARM_WITH_1_U32_DATA( ALARM_ID_DG_TRIMMER_HEATER_CJ_TEMP_OUT_OF_RANGE, trimmerHeaterColdJunctionTemp );
+        //SET_ALARM_WITH_1_U32_DATA( ALARM_ID_DG_TRIMMER_HEATER_CJ_TEMP_OUT_OF_RANGE, trimmerHeaterColdJunctionTemp );
     }
 
     // If it is above the range for the first time, stop the trimmer heater