Index: firmware/App/Controllers/TemperatureSensors.c
===================================================================
diff -u -r316368374c18744558092bdf959a2fd6a4e5574b -r852e1ea5c0990bbb22c1bba150a461bf3552c74a
--- firmware/App/Controllers/TemperatureSensors.c	(.../TemperatureSensors.c)	(revision 316368374c18744558092bdf959a2fd6a4e5574b)
+++ firmware/App/Controllers/TemperatureSensors.c	(.../TemperatureSensors.c)	(revision 852e1ea5c0990bbb22c1bba150a461bf3552c74a)
@@ -419,61 +419,61 @@
     {
 
 #ifndef _RELEASE_
-    if ( getSoftwareConfigStatus( SW_CONFIG_DISABLE_WATER_QUALITY_CHECK ) != SW_CONFIG_ENABLE_VALUE )
+        if ( getSoftwareConfigStatus( SW_CONFIG_DISABLE_WATER_QUALITY_CHECK ) != SW_CONFIG_ENABLE_VALUE )
 #endif
-    {
-        if ( getTestConfigStatus( TEST_CONFIG_DISABLE_INLET_WATER_TEMP_CHECK ) != TRUE )
         {
-            DG_OP_MODE_T opMode         = getCurrentOperationMode();
-            BOOL isWaterTempInHighRange = ( temperature > MAX_WATER_TEMPERATURE_WARNING_HIGH_RANGE ? TRUE : FALSE );
-            BOOL isWaterTempInLowRange  = ( temperature < MIN_WATER_TEMPERATURE_WARNING_LOW_RANGE ? TRUE : FALSE );
-
-            switch( opMode )
+            if ( getTestConfigStatus( TEST_CONFIG_DISABLE_INLET_WATER_TEMP_CHECK ) != TRUE )
             {
-                case DG_MODE_GENE:
-                case DG_MODE_FILL:
-                case DG_MODE_DRAI:
-                case DG_MODE_STAN:
-                    if ( TRUE == isAlarmActive( ALARM_ID_DG_INLET_WATER_TEMPERATURE_IN_HIGH_RANGE ) )
-                    {
-                        isWaterTempInHighRange = ( temperature <= MIN_WATER_TEMPERATURE_WARNING_HIGH_RANGE ? FALSE : TRUE );
-                    }
+                DG_OP_MODE_T opMode         = getCurrentOperationMode();
+                BOOL isWaterTempInHighRange = ( temperature > MAX_WATER_TEMPERATURE_WARNING_HIGH_RANGE ? TRUE : FALSE );
+                BOOL isWaterTempInLowRange  = ( temperature < MIN_WATER_TEMPERATURE_WARNING_LOW_RANGE ? TRUE : FALSE );
 
-                    // Per PRS 406
-                    checkPersistentAlarm( ALARM_ID_DG_INLET_WATER_TEMPERATURE_IN_HIGH_RANGE, isWaterTempInHighRange, temperature,
-                                          MAX_WATER_TEMPERATURE_WARNING_HIGH_RANGE );
+                switch( opMode )
+                {
+                    case DG_MODE_GENE:
+                    case DG_MODE_FILL:
+                    case DG_MODE_DRAI:
+                    case DG_MODE_STAN:
+                        if ( TRUE == isAlarmActive( ALARM_ID_DG_INLET_WATER_TEMPERATURE_IN_HIGH_RANGE ) )
+                        {
+                            isWaterTempInHighRange = ( temperature <= MIN_WATER_TEMPERATURE_WARNING_HIGH_RANGE ? FALSE : TRUE );
+                        }
 
-                    if ( TRUE == isAlarmActive( ALARM_ID_DG_INLET_WATER_TEMPERATURE_IN_LOW_RANGE ) )
-                    {
-                        isWaterTempInLowRange = ( temperature >= MAX_WATER_TEMPERATURE_WARNING_LOW_RANGE ? FALSE : TRUE );
-                    }
+                        // Per PRS 406
+                        checkPersistentAlarm( ALARM_ID_DG_INLET_WATER_TEMPERATURE_IN_HIGH_RANGE, isWaterTempInHighRange, temperature,
+                                              MAX_WATER_TEMPERATURE_WARNING_HIGH_RANGE );
 
-                    // Per PRS 405
-                    checkPersistentAlarm( ALARM_ID_DG_INLET_WATER_TEMPERATURE_IN_LOW_RANGE, isWaterTempInLowRange, temperature,
-                                          MIN_WATER_TEMPERATURE_WARNING_LOW_RANGE );
-                    break;
+                        if ( TRUE == isAlarmActive( ALARM_ID_DG_INLET_WATER_TEMPERATURE_IN_LOW_RANGE ) )
+                        {
+                            isWaterTempInLowRange = ( temperature >= MAX_WATER_TEMPERATURE_WARNING_LOW_RANGE ? FALSE : TRUE );
+                        }
 
-                case DG_MODE_FLUS:
-                case DG_MODE_HEAT:
-                case DG_MODE_HCOL:
-                case DG_MODE_CHEM:
-                case DG_MODE_CHFL:
-                case DG_MODE_ROPS:
-                    isWaterTempInHighRange = ( temperature > MAX_CLEANING_MODE_WATER_TEMPERATURE_WARNING_HIGH_RANGE ? TRUE : FALSE );
-                    // Per PRS 557
-                    checkPersistentAlarm( ALARM_ID_DG_CLEANING_MODE_INLET_WATER_TEMP_TOO_HIGH, isWaterTempInHighRange, temperature,
-                                          MAX_WATER_TEMPERATURE_WARNING_HIGH_RANGE );
-                    checkPersistentAlarm( ALARM_ID_DG_CLEANING_MODE_INLET_WATER_TEMP_TOO_LOW, isWaterTempInLowRange, temperature,
-                                          MAX_WATER_TEMPERATURE_WARNING_LOW_RANGE );
-                    break;
+                        // Per PRS 405
+                        checkPersistentAlarm( ALARM_ID_DG_INLET_WATER_TEMPERATURE_IN_LOW_RANGE, isWaterTempInLowRange, temperature,
+                                              MIN_WATER_TEMPERATURE_WARNING_LOW_RANGE );
+                        break;
 
-                default:
-                    // NOTE: Do nothing in the rest of the modes
-                    break;
+                    case DG_MODE_FLUS:
+                    case DG_MODE_HEAT:
+                    case DG_MODE_HCOL:
+                    case DG_MODE_CHEM:
+                    case DG_MODE_CHFL:
+                    case DG_MODE_ROPS:
+                        isWaterTempInHighRange = ( temperature > MAX_CLEANING_MODE_WATER_TEMPERATURE_WARNING_HIGH_RANGE ? TRUE : FALSE );
+                        // Per PRS 557
+                        checkPersistentAlarm( ALARM_ID_DG_CLEANING_MODE_INLET_WATER_TEMP_TOO_HIGH, isWaterTempInHighRange, temperature,
+                                              MAX_WATER_TEMPERATURE_WARNING_HIGH_RANGE );
+                        checkPersistentAlarm( ALARM_ID_DG_CLEANING_MODE_INLET_WATER_TEMP_TOO_LOW, isWaterTempInLowRange, temperature,
+                                              MAX_WATER_TEMPERATURE_WARNING_LOW_RANGE );
+                        break;
+
+                    default:
+                        // NOTE: Do nothing in the rest of the modes
+                        break;
+                }
             }
         }
     }
-    }
     else
     {
         // VPI is closed - clear all alarms