Index: firmware/App/Drivers/CPLD.c
===================================================================
diff -u -rea562263f55f20589a8512da8c00be33a8f239b5 -r69a52d3eafb8667fa3163949107a9351b8eb855a
--- firmware/App/Drivers/CPLD.c	(.../CPLD.c)	(revision ea562263f55f20589a8512da8c00be33a8f239b5)
+++ firmware/App/Drivers/CPLD.c	(.../CPLD.c)	(revision 69a52d3eafb8667fa3163949107a9351b8eb855a)
@@ -26,6 +26,9 @@
 #define OFF_REQUEST_GIO_PORT_PIN    0U
 #define WD_PET_GIO_PORT_PIN         1U
 #define WD_EXP_GIO_PORT_PIN         2U
+#define LAMP_GRN_SPI5_PORT_MASK     0x00000200  // (CLK(100) - re-purposed as output GPIO)
+#define LAMP_BLU_SPI5_PORT_MASK     0x00010000  // (SIMO[0](99) - re-purposed as output GPIO)
+#define LAMP_RED_SPI5_PORT_MASK     0x01000000  // (SOMI[0](98) - re-purposed as output GPIO)
 
 // CPLD pin I/O macros
 #define GET_WD_EXP()       ( PIN_SIGNAL_STATE_T )( gioGetBit( gioPORTB, WD_EXP_GIO_PORT_PIN ) )
@@ -35,36 +38,13 @@
 
 #define CLR_WD_PET()       gioSetBit( gioPORTB, WD_PET_GIO_PORT_PIN, PIN_SIGNAL_LOW )
 
-#ifdef RM46_EVAL_BOARD_TARGET
-    // for RM46 eval board, user button B uses the MIBSPI1_nCS[4] pin, so need to re-purpose that pin as GPIO to see the button
-    #define USER_BUTTON_MASK            0x00000010  // (nCS[4]
-    #define GET_USER_BUTTON()           ( PIN_SIGNAL_STATE_T )( ( ( mibspiREG1->PC2 & USER_BUTTON_MASK ) == 0 ? PIN_SIGNAL_LOW : PIN_SIGNAL_HIGH ) )
-    PIN_SIGNAL_STATE_T getUserButtonState( void )
-    {
-        PIN_SIGNAL_STATE_T result = GET_USER_BUTTON();
+#define SET_GREEN()        {mibspiREG5->PC3 |= LAMP_GRN_SPI5_PORT_MASK;}
+#define CLR_GREEN()        {mibspiREG5->PC3 &= ~LAMP_GRN_SPI5_PORT_MASK;}
+#define SET_BLUE()         {mibspiREG5->PC3 |= LAMP_BLU_SPI5_PORT_MASK;}
+#define CLR_BLUE()         {mibspiREG5->PC3 &= ~LAMP_BLU_SPI5_PORT_MASK;}
+#define SET_RED()          {mibspiREG5->PC3 |= LAMP_RED_SPI5_PORT_MASK;}
+#define CLR_RED()          {mibspiREG5->PC3 &= ~LAMP_RED_SPI5_PORT_MASK;}
 
-        return result;
-    }
-    // for RM46 eval board, user LED A uses the same GPIO pin that CPLD uses for watchdog pet. Had to disable watchdog pet to use as LED.
-    void setUserLED( BOOL on )
-    {
-        if ( on == TRUE )
-        {
-            SET_WD_PET();
-        }
-        else
-        {
-            CLR_WD_PET();
-        }
-    }
-
-    void toggleUserLED()
-    {
-        TGL_WD_PET();
-    }
-
-#endif
-
 /*************************************************************************
  * @brief initCPLD
  * The initCPLD function initializes the CPLD module.
@@ -78,6 +58,11 @@
 {
     // initialize watchdog pet output low (inactive)
     CLR_WD_PET();
+
+    // initialize alarm lamp color LED outputs low (off)
+    CLR_GREEN();
+    CLR_RED();
+    CLR_BLUE();
 }
 
 /*************************************************************************
@@ -111,3 +96,68 @@
     return level;
 }
 
+/*************************************************************************
+ * @brief setCPLDLampGreen
+ * The setCPLDLampGreen function sets the alarm lamp green signal to CPLD \n
+ * to given level.
+ * @details
+ * Inputs : none
+ * Outputs : alarm lamp green signal set to given level.
+ * @param level : LOW or HIGH
+ * @return none
+ *************************************************************************/
+void setCPLDLampGreen( PIN_SIGNAL_STATE_T level )
+{
+    if ( level == PIN_SIGNAL_HIGH )
+    {
+        SET_GREEN();
+    }
+    else
+    {
+        CLR_GREEN();
+    }
+}
+
+/*************************************************************************
+ * @brief setCPLDLampBlue
+ * The setCPLDLampBlue function sets the alarm lamp blue signal to CPLD \n
+ * to given level.
+ * @details
+ * Inputs : none
+ * Outputs : alarm lamp blue signal set to given level.
+ * @param level : LOW or HIGH
+ * @return none
+ *************************************************************************/
+void setCPLDLampBlue( PIN_SIGNAL_STATE_T level )
+{
+    if ( level == PIN_SIGNAL_HIGH )
+    {
+        SET_BLUE();
+    }
+    else
+    {
+        CLR_BLUE();
+    }
+}
+
+/*************************************************************************
+ * @brief setCPLDLampRed
+ * The setCPLDLampRed function sets the alarm lamp red signal to CPLD \n
+ * to given level.
+ * @details
+ * Inputs : none
+ * Outputs : alarm lamp red signal set to given level.
+ * @param level : LOW or HIGH
+ * @return none
+ *************************************************************************/
+void setCPLDLampRed( PIN_SIGNAL_STATE_T level )
+{
+    if ( level == PIN_SIGNAL_HIGH )
+    {
+        SET_RED();
+    }
+    else
+    {
+        CLR_RED();
+    }
+}