Index: firmware/App/Services/FPGA.c
===================================================================
diff -u -re9b499955bef76d8ca26abb2a65b60eaae1be649 -r62e9a14081b3c97ea244c3c167098eba8cd409d1
--- firmware/App/Services/FPGA.c	(.../FPGA.c)	(revision e9b499955bef76d8ca26abb2a65b60eaae1be649)
+++ firmware/App/Services/FPGA.c	(.../FPGA.c)	(revision 62e9a14081b3c97ea244c3c167098eba8cd409d1)
@@ -324,7 +324,7 @@
     U16 fpgaDACRegFIn;                      ///< Reg 126. Debug DAC channel F output
     U16 fpgaDACRegGIn;                      ///< Reg 128. Debug DAC channel G output
     U16 fpgaDACRegHIn;                      ///< Reg 130. Debug DAC channel H output
-    U08 fgpaNewCP2Control;                  ///< Reg 132. Concentrate pump 2 control
+    U08 fpgaNewCP2Control;                  ///< Reg 132. Concentrate pump 2 control
     U08 fpgaNewCP1Control;                  ///< Reg 133. Concentrate pump 1 control
 } FPGA_ACTUATORS_T;
 #pragma pack(pop)
@@ -756,7 +756,7 @@
 
     // reset one-time sets after actuator set points xmit message created
     fpgaActuatorSetPoints.fpgaNewCP1Control &= ~FPGA_CONC_PUMP_PARK_COMMAND;  // clear concentrate pump park command bits
-    fpgaActuatorSetPoints.fgpaNewCP2Control &= ~FPGA_CONC_PUMP_PARK_COMMAND;
+    fpgaActuatorSetPoints.fpgaNewCP2Control &= ~FPGA_CONC_PUMP_PARK_COMMAND;
     fpgaActuatorSetPoints.fpgaCP1Control    &= ~FPGA_CONC_PUMP_PARK_COMMAND;
     fpgaActuatorSetPoints.fpgaCP2Control    &= ~FPGA_CONC_PUMP_PARK_COMMAND;
 
@@ -1299,6 +1299,25 @@
 
 /*********************************************************************//**
  * @brief
+ * The getFPGAAcidPumpControlStatus function gets the status of the
+ * acid pump control status bits.
+ *      bit 7: Park (set in different function)
+ *      bit 6: nSleep
+ *      bit 5: nReset
+ *      bit 4: nEnable
+ *      bit 3: Direction (1=Fwd, 0=Rev)
+ *      bit 0-2: Microstepping resolution
+ * @details Inputs: none
+ * @details Outputs: fpgaActuatorSetPoints.fpgaNewCP1Control
+ * @return Acid pump control status bit
+ *************************************************************************/
+U08 getFPGAAcidPumpControlStatus( void )
+{
+    return fpgaActuatorSetPoints.fpgaNewCP1Control;
+}
+
+/*********************************************************************//**
+ * @brief
  * The setFPGABicarbPumpControl function sets the DVT concentrate pump 2
  * (bicarb pump) control mode.
  *      bit 7: Park (set in different function)
@@ -1308,18 +1327,37 @@
  *      bit 3: Direction (1=Fwd, 0=Rev)
  *      bit 0-2: Microstepping resolution
  * @details Inputs: none
- * @details Outputs: fpgaActuatorSetPoints.fgpaNewCP2Control
+ * @details Outputs: fpgaActuatorSetPoints.fpgaNewCP2Control
  * @param control Concentrate pump control set
  * @return none
  *************************************************************************/
 void setFPGABicarbPumpControl( U08 control )
 {
-    fpgaActuatorSetPoints.fgpaNewCP2Control &= FPGA_CONC_PUMP_PARK_COMMAND;  // preserve msb (park command bit)
-    fpgaActuatorSetPoints.fgpaNewCP2Control |= control;
+    fpgaActuatorSetPoints.fpgaNewCP2Control &= FPGA_CONC_PUMP_PARK_COMMAND;  // preserve msb (park command bit)
+    fpgaActuatorSetPoints.fpgaNewCP2Control |= control;
 }
 
 /*********************************************************************//**
  * @brief
+ * The getFPGABicarbPumpControlStatus function gets the DVT concentrate pump 2
+ * (bicarb pump) control mode.
+ *      bit 7: Park (set in different function)
+ *      bit 6: nSleep
+ *      bit 5: nReset
+ *      bit 4: nEnable
+ *      bit 3: Direction (1=Fwd, 0=Rev)
+ *      bit 0-2: Microstepping resolution
+ * @details Inputs: none
+ * @details Outputs: fpgaActuatorSetPoints.fpgaNewCP2Control
+ * @return Bicarb pump control status bit
+ *************************************************************************/
+U08 getFPGABicarbPumpControlStatus( void )
+{
+    return fpgaActuatorSetPoints.fpgaNewCP2Control;
+}
+
+/*********************************************************************//**
+ * @brief
  * The setFPGAAcidPumpParkCmd function sets the DVT concentrate pump 1
  * (acid pump) park command bit.
  *      bit 7: Park command bit
@@ -1341,13 +1379,13 @@
  *      bit 7: Park command bit
  *      bit 0-6: Other pump control bits (set in different function)
  * @details Inputs: none
- * @details Outputs: fpgaActuatorSetPoints.fgpaNewCP2Control
+ * @details Outputs: fpgaActuatorSetPoints.fpgaNewCP2Control
  * @param Park command bit set
  * @return none
  *************************************************************************/
 void setFPGABicarbPumpParkCmd( void )
 {
-    fpgaActuatorSetPoints.fgpaNewCP2Control |= FPGA_CONC_PUMP_PARK_COMMAND;  // this bit must be cleared after next transmit to prevent continuous park commands
+    fpgaActuatorSetPoints.fpgaNewCP2Control |= FPGA_CONC_PUMP_PARK_COMMAND;  // this bit must be cleared after next transmit to prevent continuous park commands
 }
 
 /*********************************************************************//**