Index: firmware/App/Services/WatchdogMgmt.c
===================================================================
diff -u -re12f1b3d41ae133bc0975fcb126e431c2bedda59 -r3115c2cfd605f3b1f9be3bb2064116b0cd15e9c7
--- firmware/App/Services/WatchdogMgmt.c	(.../WatchdogMgmt.c)	(revision e12f1b3d41ae133bc0975fcb126e431c2bedda59)
+++ firmware/App/Services/WatchdogMgmt.c	(.../WatchdogMgmt.c)	(revision 3115c2cfd605f3b1f9be3bb2064116b0cd15e9c7)
@@ -171,10 +171,11 @@
             }
             if ( PIN_SIGNAL_LOW == getCPLDWatchdogExpired() )
             {
-                F32 v24 = getIntADCVoltageConverted( INT_ADC_SECONDARY_HEATER_24_VOLTS );
+                F32 v24         = getIntADCVoltageConverted( INT_ADC_SECONDARY_HEATER_24_VOLTS );
+                F32 isolatedV24 = getMonitoredLineLevel( MONITORED_LINE_24V_POWER_PRIM_HTR_V );
 
                 // Verify 24V is down when w.d. expired
-                if ( v24 > MAX_24V_LEVEL_ON_WATCHDOG_EXPIRED )
+                if ( ( v24 > MAX_24V_LEVEL_ON_WATCHDOG_EXPIRED ) && ( isolatedV24 > MAX_24V_LEVEL_ON_WATCHDOG_EXPIRED ) )
                 {
                     SET_ALARM_WITH_2_F32_DATA( ALARM_ID_DG_WATCHDOG_POST_TEST_FAILED, 2.0F, v24 );
                     watchdogSelfTestStatus = SELF_TEST_STATUS_FAILED;
@@ -194,11 +195,12 @@
             {
                 if ( PIN_SIGNAL_HIGH == getCPLDWatchdogExpired() )
                 {
-                    F32 v24 = getIntADCVoltageConverted( INT_ADC_SECONDARY_HEATER_24_VOLTS );
+                    F32 v24         = getIntADCVoltageConverted( INT_ADC_SECONDARY_HEATER_24_VOLTS );
+                    F32 isolatedV24 = getMonitoredLineLevel( MONITORED_LINE_24V_POWER_PRIM_HTR_V );
 
                     // Verify 24V is down when w.d. recovered    TODO - If issue persisted
                     // ask EE team why 24V does not quite recover all the way to 22.6V even after 750 ms.  How long should it take?
-                    if ( v24 < MIN_24V_LEVEL_ON_WATCHDOG_RECOVER )
+                    if ( ( v24 < MIN_24V_LEVEL_ON_WATCHDOG_RECOVER ) && ( isolatedV24 < MIN_24V_LEVEL_ON_WATCHDOG_RECOVER ) )
                     {
                         SET_ALARM_WITH_2_F32_DATA( ALARM_ID_DG_WATCHDOG_POST_TEST_FAILED, 3.0F, v24 );
                         watchdogSelfTestStatus = SELF_TEST_STATUS_FAILED;