Index: dialin/dg/calibration_record.py
===================================================================
diff -u -rcc6dc0f17386f6967a26681dc9952afe7c18884a -ra345f4093235adf6f88ede58841e9d6ccbcd29ff
--- dialin/dg/calibration_record.py	(.../calibration_record.py)	(revision cc6dc0f17386f6967a26681dc9952afe7c18884a)
+++ dialin/dg/calibration_record.py	(.../calibration_record.py)	(revision a345f4093235adf6f88ede58841e9d6ccbcd29ff)
@@ -39,7 +39,13 @@
     _DEFAULT_RATIO_VALUE = 1
     _DEFAULT_VOLUME_VALUE = 0
     _DEFAULT_ACID_MIX_RATIO = (2.35618 / 100)
+    _DEFAULT_ACID_BOTTLE_VOL_ML = 3430.0
+    _DEFAULT_ACID_COND_US_PER_CM = 11645.05
+    _DEFAULT_ACID_BOTTLE_TEMP_C = 23.5
     _DEFAULT_BICARB_MIX_RATIO = (4.06812 / 100)
+    _DEFAULT_BICARB_BOTTLE_VOL_ML = 3780.0
+    _DEFAULT_BICARB_COND_US_PER_CM = 13734.88
+    _DEFAULT_BICARB_BOTTLE_TEMP_C = 23.5
     _DEFAULT_CALIBRATION_VALUE = 1
     _DEFAULT_TIME_VALUE = 0
     _DEFAULT_CRC_VALUE = 0
@@ -519,8 +525,9 @@
 
         for i in hardware_names:
             hardware[i] = {'acid_conc_mix_ratio': ['<f', self._DEFAULT_ACID_MIX_RATIO],
-                           'start_volume': ['<f', self._DEFAULT_VOLUME_VALUE],
-                           'reserved_space': ['<f', self._DEFAULT_VOLUME_VALUE],
+                           'acid_bottle_volume_ml': ['<f', self._DEFAULT_ACID_BOTTLE_VOL_ML],
+                           'acid_cond_us_per_cm': ['<f', self._DEFAULT_ACID_COND_US_PER_CM],
+                           'acid_bottle_temp_c': ['<f', self._DEFAULT_ACID_BOTTLE_TEMP_C],
                            'cal_time': ['<i', self._DEFAULT_TIME_VALUE], 'crc': ['<H', self._DEFAULT_CRC_VALUE]}
 
             group_byte_size += self._utilities.calculate_group_byte_size(hardware[i])
@@ -542,8 +549,9 @@
 
         for i in hardware_names:
             hardware[i] = {'bicarb_conc_mix_ratio': ['<f', self._DEFAULT_BICARB_MIX_RATIO],
-                           'start_volume': ['<f', self._DEFAULT_VOLUME_VALUE],
-                           'reserved_space': ['<f', self._DEFAULT_VOLUME_VALUE],
+                           'bicarb_bottle_volume_ml': ['<f', self._DEFAULT_BICARB_BOTTLE_VOL_ML],
+                           'bicarb_cond_us_per_cm': ['<f', self._DEFAULT_BICARB_COND_US_PER_CM],
+                           'bicarb_bottle_temp_c': ['<f', self._DEFAULT_BICARB_BOTTLE_TEMP_C],
                            'cal_time': ['<i', self._DEFAULT_TIME_VALUE], 'crc': ['<H', self._DEFAULT_CRC_VALUE]}
 
             group_byte_size += self._utilities.calculate_group_byte_size(hardware[i])
Index: dialin/utils/nv_ops_utils.py
===================================================================
diff -u -r5eb006b08eb1d7b641b22fff20072ab7b685cfec -ra345f4093235adf6f88ede58841e9d6ccbcd29ff
--- dialin/utils/nv_ops_utils.py	(.../nv_ops_utils.py)	(revision 5eb006b08eb1d7b641b22fff20072ab7b685cfec)
+++ dialin/utils/nv_ops_utils.py	(.../nv_ops_utils.py)	(revision a345f4093235adf6f88ede58841e9d6ccbcd29ff)
@@ -791,6 +791,7 @@
                 if data_type == '<c':
                     temp_buffer.append(NVOpsUtils.get_processed_characters(new_record[group][key]))
                 else:
+                    print(data_type, current_value)
                     temp_buffer.append(struct.pack(data_type, current_value))
 
                 temp_buffer[self._PAYLOAD_CURRENT_MSG_INDEX] = struct.pack('<i', current_message_count)
Index: tests/dg_nvm_scripts.py
===================================================================
diff -u -rfab0ce077e13918698b5310b685d5d736880f5e2 -ra345f4093235adf6f88ede58841e9d6ccbcd29ff
--- tests/dg_nvm_scripts.py	(.../dg_nvm_scripts.py)	(revision fab0ce077e13918698b5310b685d5d736880f5e2)
+++ tests/dg_nvm_scripts.py	(.../dg_nvm_scripts.py)	(revision a345f4093235adf6f88ede58841e9d6ccbcd29ff)
@@ -49,12 +49,12 @@
     # It creates a folder called DG_NV_Records in the destination that is called
     # If no address is provided, the default location is one folder above the dialin folder wherever it is installed
     # in you computer.
-    dg.calibration_record.cmd_get_dg_calibration_record_report()
+    #dg.calibration_record.cmd_get_dg_calibration_record_report()
 
     # Use cmd_set_dg_calibration_excel_to_fw() set the changes back to firmware
     # This function requires an address for the excel report. Use the absolute address of your excel report like the
     # example below
-    #dg.calibration_record.cmd_set_dg_calibration_excel_to_fw('/home/fw/projects/DG_NV_Records/2022-06-20-DG-Record.xlsx')
+    dg.calibration_record.cmd_set_dg_calibration_excel_to_fw('/home/fw/projects/DG_NV_Records/2022-07-12-DG-Record.xlsx')
 
     # For resetting the calibration record to benign values, use the function below
     #dg.calibration_record.cmd_reset_dg_calibration_record()
@@ -83,9 +83,9 @@
 
     if dg.cmd_log_in_to_dg():
 
-        run_sw_configs_commands()
+        #run_sw_configs_commands()
 
-        #run_calibration_commands()
+        run_calibration_commands()
 
         #run_system_commands()
 
Index: tests/dg_tests.py
===================================================================
diff -u -rfab0ce077e13918698b5310b685d5d736880f5e2 -ra345f4093235adf6f88ede58841e9d6ccbcd29ff
--- tests/dg_tests.py	(.../dg_tests.py)	(revision fab0ce077e13918698b5310b685d5d736880f5e2)
+++ tests/dg_tests.py	(.../dg_tests.py)	(revision a345f4093235adf6f88ede58841e9d6ccbcd29ff)
@@ -668,7 +668,7 @@
 
     #run_heat_disinfect()
 
-    run_chemical_disinfect()
+    #run_chemical_disinfect()
 
     #run_dg()
 
@@ -679,13 +679,17 @@
     #collect_hd_treatment()
 
     #while True:
-    #    print(get_temperature_sensors_info(), get_dg_fans_info())
+    #    print(get_hd_fans_info())
     #    sleep(1)
 
     #while True:
     #    print(get_new_ro_info(), get_ro_info())
     #    sleep(1)
 
+    while True:
+        print(dg.rtc.get_rtc_epoch(), hd.rtc.get_rtc_epoch())
+        sleep(1)
+
     # test_dg_fans_alarms()
 
     #test_dvt_drain_pump()
@@ -697,3 +701,7 @@
 
     #test_hd_valves()
 
+    #while True:
+    #    print(get_heaters_info())
+    #    sleep(1)
+
Index: tests/peter/set_RTCs.py
===================================================================
diff -u -rcc6dc0f17386f6967a26681dc9952afe7c18884a -ra345f4093235adf6f88ede58841e9d6ccbcd29ff
--- tests/peter/set_RTCs.py	(.../set_RTCs.py)	(revision cc6dc0f17386f6967a26681dc9952afe7c18884a)
+++ tests/peter/set_RTCs.py	(.../set_RTCs.py)	(revision a345f4093235adf6f88ede58841e9d6ccbcd29ff)
@@ -29,17 +29,17 @@
     current_time_stamp = time()
     current_time = localtime(current_time_stamp)
     print(current_time)
+    """
+    if hd.cmd_log_in_to_hd():
+        hd.rtc.cmd_set_rtc_time_and_date(current_time.tm_sec,
+                                         current_time.tm_min,
+                                         current_time.tm_hour,
+                                         current_time.tm_mday,
+                                         current_time.tm_mon,
+                                         current_time.tm_year)
+        print("Successfully set HD rtc")
+    """
 
-    #if hd.cmd_log_in_to_hd():
-    #    hd.rtc.cmd_set_rtc_time_and_date(current_time.tm_sec,
-    #                                     current_time.tm_min,
-    #                                     current_time.tm_hour,
-    #                                     current_time.tm_mday,
-    #                                     current_time.tm_mon,
-    #                                     current_time.tm_year)
-    #    print("Successfully set HD rtc")
-
-
     if dg.cmd_log_in_to_dg():
         dg.rtc.cmd_set_rtc_time_and_date(current_time.tm_sec,
                                          current_time.tm_min,