Index: firmware/App/Controllers/BloodLeak.c
===================================================================
diff -u -r4cfe2a27c1c066fa8bda9689c28aec895d7de84b -r2892e3f528d76f45719b7124358e9d242bf27172
--- firmware/App/Controllers/BloodLeak.c	(.../BloodLeak.c)	(revision 4cfe2a27c1c066fa8bda9689c28aec895d7de84b)
+++ firmware/App/Controllers/BloodLeak.c	(.../BloodLeak.c)	(revision 2892e3f528d76f45719b7124358e9d242bf27172)
@@ -57,7 +57,7 @@
 #define BLOOD_LEAK_MIN_WAIT_TIME_2_GET_CAL_MS ( 2 * MS_PER_SECOND )                              ///< Blood leak minimum wait time to get calibration in milliseconds.
 
 // TODO remove after zeroing was fixed
-#define BLOOD_LEAK_ZERO_SENSOR_SEQ_LENGTH     5                                                  ///< Blood leak zero sensor sequence length.
+#define BLOOD_LEAK_ZERO_SENSOR_SEQ_LENGTH     4                                                  ///< Blood leak zero sensor sequence length.
 #define BLOOD_LEAK_ZERO_Z_CHAR_ASCII          90                                                 ///< Blood leak zero sensor 'Z' command in ascii.
 #define BLOOD_LEAK_ZERO_FIFO_STOP_INDEX       2                                                  ///< Blood leak zero sensor stop writing to FIFO command.
 // TODO remove after zeroing was fixed
@@ -109,7 +109,6 @@
 // TODO remove after zeroing was fixed
 /// Blood leak zero sensor sequence array.
 static const U08 BLOOD_LEAK_ZERO_SNSR_SEQUENCE[ BLOOD_LEAK_ZERO_SENSOR_SEQ_LENGTH ] = { BLOOD_LEAK_ZERO_Z_CHAR_ASCII,
-                                                                                        BLOOD_LEAK_CARRIAGE_RETURN_ASCII,
                                                                                         BLOOD_LEAK_STOP_WRITE_FIFO_COMMAND,
                                                                                         BLOOD_LEAK_UART_COMM_ACTIVE_HIGH,
                                                                                         BLOOD_LEAK_UART_COMM_ACTIVE_LOW };
@@ -337,7 +336,9 @@
         }
         else
         {
+#ifndef IGNORE_BLOOD_LEAK_ALARM
             activateAlarmNoData( ALARM_ID_HD_BLOOD_LEAK_SENSOR_SET_POINT_SET_FAILURE );
+#endif
         }
     }
     else
@@ -434,7 +435,7 @@
     {
         U08 command = BLOOD_LEAK_ZERO_SNSR_SEQUENCE[ bloodLeakUARTCmdIndex ];
 
-        if ( bloodLeakUARTCmdIndex <= BLOOD_LEAK_ZERO_FIFO_STOP_INDEX )
+        if ( bloodLeakUARTCmdIndex <= 1) //BLOOD_LEAK_ZERO_FIFO_STOP_INDEX )
         {
             setFPGABloodLeakUARTTransmit( (U08)command );
         }
@@ -459,6 +460,7 @@
         {
             if ( TRUE == didTimeout( bloodLeakZeroStartTime, BLOOD_LEAK_TIMEOUT_MS ) )
             {
+                BOOL test = FALSE;
     #ifndef IGNORE_BLOOD_LEAK_ALARM
                 activateAlarmNoData( ALARM_ID_HD_BLOOD_LEAK_FAULT );
     #endif