Index: firmware/App/Controllers/DGInterface.c
===================================================================
diff -u -r427b37ad929a8d88b5fcb9ae21a4f4146ffd2fef -r4031344a26897fb4adc74da2bdc3bd31d414b262
--- firmware/App/Controllers/DGInterface.c	(.../DGInterface.c)	(revision 427b37ad929a8d88b5fcb9ae21a4f4146ffd2fef)
+++ firmware/App/Controllers/DGInterface.c	(.../DGInterface.c)	(revision 4031344a26897fb4adc74da2bdc3bd31d414b262)
@@ -37,18 +37,18 @@
 
 // ********** private definitions **********
 
-#define START_DG_CMD                            TRUE                        ///< Parameter for DG start/stop command function.  True = start.
-#define STOP_DG_CMD                             FALSE                       ///< Parameter for DG start/stop command function.  False = stop.
+#define START_DG_CMD                             TRUE                        ///< Parameter for DG start/stop command function.  True = start.
+#define STOP_DG_CMD                              FALSE                       ///< Parameter for DG start/stop command function.  False = stop.
 
-#define SIZE_OF_LARGE_LOAD_CELL_AVG             32                          ///< Large load cell moving average has 32 samples.
+#define SIZE_OF_LARGE_LOAD_CELL_AVG              32                          ///< Large load cell moving average has 32 samples.
 
-#define DIALYSATE_TEMP_OUT_OF_TARGET_TOL_C      2.0F                        ///< Dialysate temperature out of target tolerance C.
-#define DIALYSATE_TEMP_OUT_OF_TARGET_TIMEOUT_MS ( 300 * MS_PER_SECOND )     ///< Dialysate temperature out of target timeout in milliseconds.
-#define DIALYSATE_TEMP_HIGH_SAFETY_LIMIT_C      46.0F                       ///< Dialysate high safety temperature limit in C.
-#define DIALYSATE_TEMP_HIGH_SAFETY_TIMEOUT_MS   ( 1 * MS_PER_SECOND )       ///< Dialysate temperature high safety timeout in milliseconds.
-#define DIALYSATE_TEMP_LOW_SAFETY_LIMIT_C       42.0F                       ///< Dialysate low safety temperature limit in C.
-#define DIALYSATE_TEMP_LOW_SAFETY_TIMEOUT_MS    ( 10 * MS_PER_SECOND )      ///< Dialysate temperature low safety timeout in milliseconds.
-#define DG_DATA_FRESHNESS_TIMEOUT_MS            ( 3 * MS_PER_SECOND )       ///< DG data freshness timeout (in ms).
+#define DIALYSATE_TEMP_OUT_OF_TARGET_TOL_C       2.0F                        ///< Dialysate temperature out of target tolerance C.
+#define DIALYSATE_TEMP_OUT_OF_TARGET_TIMEOUT_MS  ( 300 * MS_PER_SECOND )     ///< Dialysate temperature out of target timeout in milliseconds.
+#define DIALYSATE_TEMP_HIGH_SAFETY_LIMIT_C       46.0F                       ///< Dialysate high safety temperature limit in C.
+#define DIALYSATE_TEMP_HIGH_SAFETY_TIMEOUT_MS    ( 1 * MS_PER_SECOND )       ///< Dialysate temperature high safety timeout in milliseconds.
+#define DIALYSATE_TEMP_LOW_SAFETY_LIMIT_C        42.0F                       ///< Dialysate low safety temperature limit in C.
+#define DIALYSATE_TEMP_LOW_SAFETY_TIMEOUT_MS     ( 10 * MS_PER_SECOND )      ///< Dialysate temperature low safety timeout in milliseconds.
+#define DG_DATA_FRESHNESS_TIMEOUT_MS             ( 3 * MS_PER_SECOND )       ///< DG data freshness timeout (in ms).
 
 // ********** private data **********
 
@@ -235,7 +235,7 @@
 void execDGInterfaceMonitor( void )
 {
     // Trigger alarm if not receiving new load cell data message in timely manner
-    checkDGDataFreshness( ALARM_ID_HD_NEW_LOAD_CELL_DATA_MESSAGE_NOT_RECEIVE, &dgLoadCellDataFreshFlag );
+    /*checkDGDataFreshness( ALARM_ID_HD_NEW_LOAD_CELL_DATA_MESSAGE_NOT_RECEIVE, &dgLoadCellDataFreshFlag );
 
     // Trigger alarm if not receiving new dialysate temperature data message in timely manner
     checkDGDataFreshness( ALARM_ID_HD_NEW_DIALYSATE_TEMPERATURE_DATA_MESSAGE_NOT_RECEIVE, &dgDialysateTemperatureDataFreshFlag );
@@ -246,7 +246,7 @@
     // Trigger alarm if not receiving new DG op mode message in timely manner
     checkDGDataFreshness( ALARM_ID_HD_NEW_DG_OPERATION_MODE_MESSAGE_NOT_RECEIVE, &dgOpModeDataFreshFlag );
 
-    // Check to see if DG has restarted
+    // Check to see if DG has restarted*/
     checkDGRestart();
 
     // Check the status of the trimmer heater
@@ -452,26 +452,26 @@
 
 /*********************************************************************//**
  * @brief
- * The getDialysateTemperature function gets the latest dialysate temperature.
- * @details Inputs: dgDialysateTemp
+ * The getDGDisinfectsStates function returns the DG disinfects readings.
+ * @details Inputs: none
  * @details Outputs: none
- * @return the current dialysate temperature
+ * @return the current DG disinfects readings
  *************************************************************************/
-F32 getDialysateTemperature( void )
+DG_DISINFECT_UI_STATES_T getDGDisinfectsStates( void )
 {
-    return dgDialysateTemp;
+    return disinfectsStatus;
 }
 
 /*********************************************************************//**
  * @brief
- * The getDGDisinfectsStates function returns the DG disinfects readings.
- * @details Inputs: none
+ * The getDialysateTemperature function gets the latest dialysate temperature.
+ * @details Inputs: dgDialysateTemp
  * @details Outputs: none
- * @return the current DG disinfects readings
+ * @return the current dialysate temperature
  *************************************************************************/
-DG_DISINFECT_UI_STATES_T getDGDisinfectsStates( void )
+F32 getDialysateTemperature( void )
 {
-    return disinfectsStatus;
+    return dgDialysateTemp;
 }
 
 /*********************************************************************//**