Index: firmware/App/Controllers/DialInFlow.c
===================================================================
diff -u -r0665a32e26dd466378e6ea6fda940353afc691f1 -r52412b5ae4d6087c1363676430942360f751dd7d
--- firmware/App/Controllers/DialInFlow.c	(.../DialInFlow.c)	(revision 0665a32e26dd466378e6ea6fda940353afc691f1)
+++ firmware/App/Controllers/DialInFlow.c	(.../DialInFlow.c)	(revision 52412b5ae4d6087c1363676430942360f751dd7d)
@@ -83,8 +83,6 @@
 static const U32 DIP_ROTOR_ERROR_PERSIST_ROTATION_MIN = 3;
 /// Persist time (task intervals) pump direction error condition.
 static const U32 DIP_DIRECTION_ERROR_PERSIST   = (250 / TASK_PRIORITY_INTERVAL);
-/// Persist time (task intervals) dialysate flow rate out of range error condition.
-static const U32 DIP_MAX_FLOW_RATE_OUT_OF_RANGE_PERSIST = (1 * MS_PER_SECOND);
 /// Time threshold to trigger an alarm if Dialysate flow data has not arrived within 3 seconds
 static const U32 DIP_DIALYSATE_FLOW_DATA_ALARM_THRESHOLD = ((3 * MS_PER_SECOND) / TASK_PRIORITY_INTERVAL);
 
@@ -234,9 +232,9 @@
 static void updateDialInPumpSpeedAndDirectionFromHallSensors( void );
 static void checkDialInPumpRotor( void );
 static void checkDialInPumpDirection( void );
-static void checkDialInPumpSpeeds( void );
+static void checkDialInPumpSpeeds( void );
+static void checkDialInPumpFlowRate( void );
 static void checkDialInPumpMCCurrent( void );
-static void checkDialInPumpFlowRate( void );
 static F32  calcDialInFlow( void );
 static F32  dialysateInPumpRPMFromTargetFlowRate( F32 QdTarget );
 static F32  dialysateInPumpPWMFromTargetFlowRate( F32 QdTarget );
@@ -274,8 +272,7 @@
                             DIP_P_COEFFICIENT, DIP_I_COEFFICIENT,
                             MIN_DIAL_IN_PUMP_PWM_DUTY_CYCLE, MAX_DIAL_IN_PUMP_PWM_DUTY_CYCLE );
 
-    // Initialize persistent alarm for flow sensor signal strength too low
-    initPersistentAlarm( ALARM_ID_HD_DIAL_IN_FLOW_OUT_OF_RANGE, 0, DIP_MAX_FLOW_RATE_OUT_OF_RANGE_PERSIST );
+    // Initialize persistent alarms
     initPersistentAlarm( ALARM_ID_HD_DIAL_IN_FLOW_CHECK_FAILURE, 0, DIP_NO_FLOW_CHK_PERSIST );
     initTimeWindowedCount( TIME_WINDOWED_COUNT_DIP_COMMUTATION_ERROR, DIP_COMMUTATION_ERROR_MAX_CNT, DIP_COMMUTATION_ERROR_TIME_WIN_MS );
 }
@@ -1406,17 +1403,6 @@
 {
     F32 flow = getMeasuredDialInFlowRate();
 
-    // Range check on measure DPi flow rate.
-    if ( ( TRUE == isPersistentAlarmTriggered( ALARM_ID_HD_DIAL_IN_FLOW_OUT_OF_RANGE, ( flow > DIP_MAX_FLOW_RATE ) || ( flow < DIP_MIN_FLOW_RATE ) ) ) )
-    {
-#ifndef _RELEASE_
-        if ( getSoftwareConfigStatus( SW_CONFIG_DISABLE_PUMP_FLOW_CHECKS ) != SW_CONFIG_ENABLE_VALUE )
-#endif
-        {
-            SET_ALARM_WITH_1_F32_DATA( ALARM_ID_HD_DIAL_IN_FLOW_OUT_OF_RANGE, flow );
-        }
-    }
-
     // Check DG Dialysate flow rate
     if ( ( TRUE == isDialInPumpRunning() ) && ( dialInPumpControlMode != PUMP_CONTROL_MODE_OPEN_LOOP ) )
     {