Index: firmware/App/Controllers/DialInFlow.c
===================================================================
diff -u -r46b163d19c65e8c21db7b0247bbb1af0dba1ece5 -r15919f0c12c0047d3b6331c1f97cdad1dafb3f1b
--- firmware/App/Controllers/DialInFlow.c	(.../DialInFlow.c)	(revision 46b163d19c65e8c21db7b0247bbb1af0dba1ece5)
+++ firmware/App/Controllers/DialInFlow.c	(.../DialInFlow.c)	(revision 15919f0c12c0047d3b6331c1f97cdad1dafb3f1b)
@@ -77,8 +77,8 @@
 static const U32 DIP_OFF_ERROR_PERSIST         = ((5 * MS_PER_SECOND) / TASK_PRIORITY_INTERVAL);
 /// Persist time (task intervals) motor speed error condition.
 static const U32 DIP_MOTOR_SPEED_ERROR_PERSIST = ((5 * MS_PER_SECOND) / TASK_PRIORITY_INTERVAL);
-/// Persist time (task intervals) rotor speed error condition.
-static const U32 DIP_ROTOR_SPEED_ERROR_PERSIST = ((12 * MS_PER_SECOND) / TASK_PRIORITY_INTERVAL);
+/// Rotor speed persist time test needs a minimum number of rotations.
+static const U32 DIP_ROTOR_ERROR_PERSIST_ROTATION_MIN = 3;
 /// Persist time (task intervals) pump direction error condition.
 static const U32 DIP_DIRECTION_ERROR_PERSIST   = (250 / TASK_PRIORITY_INTERVAL);
 /// Persist time (task intervals) dialysate flow rate out of range error condition.
@@ -880,6 +880,28 @@
     return result;
 }
 
+/*********************************************************************//**
+ * @brief
+ * The getPumpRotorErrorPersistTime function calculates the Rotor error persist time.
+ * @details Inputs: none
+ * @details Outputs: none
+ * @param mtr_rpm, RPM of the motor.
+ *        gear_ratio, Gear ratio of motor vs motor
+ * @return Persistent error test time in (ms)
+ *************************************************************************/
+U32 getPumpRotorErrorPersistTime( F32 mtr_rpm, F32 gear_ratio )
+{
+    U32 err_persist_time = 0xFFFFFFF;
+
+    if ( mtr_rpm > 0 )
+    {
+        /// Calculate persist time for rotor speed error condition.
+        err_persist_time = ( ( DIP_ROTOR_ERROR_PERSIST_ROTATION_MIN / ( mtr_rpm / gear_ratio / SEC_PER_MIN ) ) * MS_PER_SECOND );
+    }
+
+   return err_persist_time;
+}
+
 /*********************************************************************//**
  * @brief
  * The publishDialInFlowData function publishes dialIn flow data at the set
@@ -1130,7 +1152,7 @@
         F32 cmdMotorSpeed = DIP_PWM_TO_MOTOR_SPEED_RPM( dialInPumpPWMDutyCyclePctSet );
         F32 deltaMotorSpeed = fabs( measMotorSpeed - cmdMotorSpeed );
         F32 deltaMCMotorSpeed = fabs( measMCMotorSpeed - cmdMotorSpeed );
-        F32 measRotorSpeed = getMeasuredDialInPumpRotorSpeed();
+        F32 measRotorSpeed = fabs( getMeasuredDialInPumpRotorSpeed() );
         F32 measMotorSpeedInRotorRPM = measMotorSpeed / DIP_GEAR_RATIO;
         F32 deltaRotorSpeed = fabs( measRotorSpeed - measMotorSpeedInRotorRPM );
 
@@ -1155,7 +1177,7 @@
         // Check measured rotor speed vs. measured motor speed while controlling to target
         if ( deltaRotorSpeed > DIP_MAX_ROTOR_VS_MOTOR_DIFF_RPM )
         {
-            if ( ++errorDialInRotorSpeedPersistTimerCtr >= DIP_ROTOR_SPEED_ERROR_PERSIST )
+            if ( ++errorDialInRotorSpeedPersistTimerCtr >= ( getPumpRotorErrorPersistTime( measMotorSpeed, DIP_GEAR_RATIO ) / TASK_PRIORITY_INTERVAL ) )
             {
 #ifndef _RELEASE_
                 if ( getSoftwareConfigStatus( SW_CONFIG_DISABLE_PUMP_SPEED_CHECKS ) != SW_CONFIG_ENABLE_VALUE )